ELOG MUST2

Mon Mar 26 11:44:27 2018

Currently we do not have access to the experiment number. To write an entry for e744 the nickname TEST will be used.

Mon Mar 26 11:46:43 2018

Tests runs Ganacq log

(15:51:33 - 19/03/2018) INFO - rcc_gui - Started run #1

(16:22:01 - 19/03/2018) INFO - rcc_gui - Stopped run #1

(16:25:05 - 19/03/2018) INFO - rcc_gui - Started run #2
Pedestal aligned T1-4
(16:31:10 - 19/03/2018) INFO - rcc_gui - Stopped run #2

(16:32:26 - 19/03/2018) INFO - rcc_gui - Started run #3
realigned the pedestal on T1-4
(16:33:48 - 19/03/2018) INFO - rcc_gui - Stopped run #3

(16:41:52 - 19/03/2018) INFO - rcc_gui - Started run #4
Set polarity of T1-4 correctly and set again the pedestals
(16:49:34 - 19/03/2018) INFO - rcc_gui - Stopped run #4

(16:53:42 - 19/03/2018) INFO - rcc_gui - Started run #5

(16:55:20 - 19/03/2018) INFO - rcc_gui - Stopped run #5

(16:56:40 - 19/03/2018) INFO - rcc_gui - Started run #6

(16:57:11 - 19/03/2018) INFO - rcc_gui - Stopped run #6

(16:58:04 - 19/03/2018) INFO - rcc_gui - Started run #7

(16:58:27 - 19/03/2018) INFO - rcc_gui - Stopped run #7

(17:06:47 - 19/03/2018) INFO - rcc_gui - Stopped run #8

(17:08:44 - 19/03/2018) INFO - rcc_gui - Started run #9

(17:08:49 - 19/03/2018) INFO - rcc_gui - Started run #8

(17:13:44 - 19/03/2018) INFO - rcc_gui - Stopped run #9

(17:14:56 - 19/03/2018) INFO - rcc_gui - Started run #10

(17:15:44 - 19/03/2018) INFO - rcc_gui - Stopped run #10

(17:17:52 - 19/03/2018) INFO - rcc_gui - Started run #11

(17:18:16 - 19/03/2018) INFO - rcc_gui - Stopped run #11

(17:20:54 - 19/03/2018) INFO - rcc_gui - Started run #12

(17:26:05 - 19/03/2018) INFO - rcc_gui - Stopped run #12

(17:26:56 - 19/03/2018) INFO - rcc_gui - Started run #13

(17:32:16 - 19/03/2018) INFO - rcc_gui - Stopped run #13

(17:32:55 - 19/03/2018) INFO - rcc_gui - Started run #14

(17:34:05 - 19/03/2018) INFO - rcc_gui - Stopped run #14

(17:35:25 - 19/03/2018) INFO - rcc_gui - Started run #15

(18:20:40 - 19/03/2018) INFO - rcc_gui - Stopped run #15

(18:21:00 - 19/03/2018) INFO - rcc_gui - Started run #16

(18:23:36 - 19/03/2018) INFO - rcc_gui - Stopped run #16

(18:23:52 - 19/03/2018) INFO - rcc_gui - Started run #17

(18:30:52 - 19/03/2018) INFO - rcc_gui - Stopped run #17

(18:31:42 - 19/03/2018) INFO - rcc_gui - Started run #18

(18:37:11 - 19/03/2018) INFO - rcc_gui - Stopped run #18

(18:37:43 - 19/03/2018) INFO - rcc_gui - Started run #19

(18:39:44 - 19/03/2018) INFO - rcc_gui - Stopped run #19

(18:40:08 - 19/03/2018) INFO - rcc_gui - Started run #20

(18:43:10 - 19/03/2018) INFO - rcc_gui - Stopped run #20

(18:44:12 - 19/03/2018) INFO - rcc_gui - Started run #21

(18:45:31 - 19/03/2018) INFO - rcc_gui - Stopped run #21

(09:19:38 - 20/03/2018) INFO - rcc_gui - Stopped run #22

(09:19:46 - 20/03/2018) INFO - rcc_gui - Started run #22

(09:21:46 - 20/03/2018) INFO - rcc_gui - Started run #23

(09:23:22 - 20/03/2018) INFO - rcc_gui - Stopped run #23

(09:23:56 - 20/03/2018) INFO - rcc_gui - Started run #24

(09:25:31 - 20/03/2018) INFO - rcc_gui - Stopped run #24

(09:29:18 - 20/03/2018) INFO - rcc_gui - Stopped run #25

(09:31:08 - 20/03/2018) INFO - rcc_gui - Started run #26

(09:31:14 - 20/03/2018) INFO - rcc_gui - Started run #25

(09:32:23 - 20/03/2018) INFO - rcc_gui - Stopped run #26

(09:55:33 - 20/03/2018) ERROR - rcc_gui - Operation forbidden - Storage mode can be changed only in READY state
(09:56:20 - 20/03/2018) INFO - rcc_gui - Started run #26
source alpha, en G3, piedestaux suppression set
(14:24:46 - 20/03/2018) INFO - rcc_gui - Stopped run #26

(14:25:43 - 20/03/2018) INFO - rcc_gui - Started run #27
follow up, same condition as run 26, stopped daq for analysis.
(09:42:36 - 21/03/2018) INFO - rcc_gui - Stopped run #27

(18:06:46 - 21/03/2018) INFO - rcc_gui - Started run #28

(18:09:02 - 21/03/2018) INFO - rcc_gui - Stopped run #28

(18:10:33 - 21/03/2018) INFO - rcc_gui - Started run #29

(18:11:47 - 21/03/2018) INFO - rcc_gui - Stopped run #29

(18:16:59 - 21/03/2018) INFO - rcc_gui - Started run #30

(18:18:15 - 21/03/2018) INFO - rcc_gui - Stopped run #30

(18:25:10 - 21/03/2018) INFO - rcc_gui - Started run #31

(18:26:51 - 21/03/2018) INFO - rcc_gui - Stopped run #31

(18:37:07 - 21/03/2018) INFO - rcc_gui - Started run #32

(18:39:04 - 21/03/2018) INFO - rcc_gui - Stopped run #32

(18:41:49 - 21/03/2018) INFO - rcc_gui - Started run #33

(18:49:13 - 21/03/2018) INFO - rcc_gui - Stopped run #33

(18:53:08 - 21/03/2018) INFO - rcc_gui - Started run #34

(18:53:42 - 21/03/2018) INFO - rcc_gui - Stopped run #34

(18:56:02 - 21/03/2018) INFO - rcc_gui - Started run #35

(18:57:06 - 21/03/2018) INFO - rcc_gui - Stopped run #35

(10:22:37 - 22/03/2018) INFO - rcc_gui - Started run #37
Start source 3a MUVI2 1,2 (MM5 & MM6)
(11:24:12 - 22/03/2018) INFO - rcc_gui - Stopped run #37

(11:25:45 - 22/03/2018) INFO - rcc_gui - Started run #38
correction thresolds Muvi2
(12:26:38 - 22/03/2018) INFO - rcc_gui - Stopped run #38

(12:46:48 - 22/03/2018) INFO - rcc_gui - Started run #39

(12:49:47 - 22/03/2018) INFO - rcc_gui - Stopped run #39

(12:59:48 - 22/03/2018) INFO - rcc_gui - Started run #40

(15:44:26 - 22/03/2018) INFO - rcc_gui - Stopped run #40

(09:11:26 - 23/03/2018) INFO - rcc_gui - Started run #41
test
(09:13:41 - 23/03/2018) INFO - rcc_gui - Stopped run #41

(09:13:48 - 23/03/2018) ERROR - rcc_gui - Operation forbidden - Storage mode can be changed only in READY state
(09:41:06 - 23/03/2018) INFO - rcc_gui - Started run #41
MM5 connected to MM8
MM6 connected to MM5
correct piedestal
3 pics alpha source
(14:02:04 - 23/03/2018) INFO - rcc_gui - Stopped run #41

(14:25:59 - 23/03/2018) INFO - rcc_gui - Started run #42
channel MM5 = real MM7
channel MM6 = real MM6
alpha source
(14:31:33 - 23/03/2018) INFO - rcc_gui - Stopped run #42

(14:33:42 - 23/03/2018) INFO - rcc_gui - Started run #43
same after change in the piedestals
(15:54:10 - 23/03/2018) INFO - rcc_gui - Stopped run #43

Bidimensional graphs for Telescope 7 and 6

Mon Mar 26 14:20:22 2018

WARNING T5 == T7

EDIT 27/03/18 : WARNING X and Y are inverted, this entry should be ignored see entry : Bidim for T1 T3 T4 T5 T6 T7 T8

Attachment 1: T6_3alpha.pdf

Attachment 2: T7_3alpha.pdf

TEST

Tue Mar 27 10:47:39 2018

Tue Mar 27 11:11:04 2018

Different plots of Strip channel vs Strip number for X and Y in order to make our choice

Attachment 1: StripXE_vs_StripNbr_T1.pdf

Attachment 2: StripYE_vs_StripNbr_T1.pdf

Attachment 3: StripXE_vs_StripNbr_T3.pdf

Attachment 4: StripYE_vs_StripNbr_T3.pdf

Attachment 5: StripXE_vs_StripNbr_T4.pdf

Attachment 6: StripYE_vs_StripNbr_T4.pdf

Attachment 7: StripXE_vs_StripNbr_T5.pdf

Attachment 8: StripYE_vs_StripNbr_T5.pdf

Attachment 9: StripXE_vs_StripNbr_T6.pdf

Attachment 10: StripYE_vs_StripNbr_T6.pdf

Attachment 11: StripXE_vs_StripNbr_T7.pdf

Attachment 12: StripYE_vs_StripNbr_T7.pdf

Attachment 13: StripXE_vs_StripNbr_T8.pdf

Attachment 14: StripYE_vs_StripNbr_T8.pdf

Bidim for T1 T3 T4 T5 T6 T7 T8

Tue Mar 27 16:26:29 2018

Attachment 1: StripX_vs_StripY_T1.pdf

Attachment 2: StripX_vs_StripY_T3.pdf

Attachment 3: StripX_vs_StripY_T4.pdf

Attachment 4: StripX_vs_StripY_T5.pdf

Attachment 5: StripX_vs_StripY_T6.pdf

Attachment 6: StripX_vs_StripY_T7.pdf

Attachment 7: StripX_vs_StripY_T8.pdf

Tue Mar 27 17:22:24 2018

We can see that the DSSSDs on T1(CsI) T3(CsI) T4(CsI) and T5(SiLi) are in good shape (cf :Bidim for T1 T3 T4 T5 T6 T7 T8 ).

As for now, we would like to keep the telescope as is. M2C should be moved tomorrow (28/03/18).

After that we would like to use the two spare DSSSDs available on both T2 and on the O degree telescope (now called T5(CsI)).

If the spare DSSSDs are judged not be good enough for the experiment, we will swap current T5(SiLi) DSSDs on the 0 degree Telescope T5(CsI).

Wed Mar 28 13:21:32 2018

e744 : Valerian wrote:

Which telescope should we take for T5? T7 or T6?

Wed Mar 28 16:35:01 2018

e744 : Valerian wrote:

Which telescope should we take for T5? T7 or T6?

Looking at the previous Calimero tests Adrien did during his experiment, neither telescope are good as is... the T7 has no time calibration and T6 might have some Asics problem...

We can either use T6 and check if the problem we saw on it's DSSDs are due to some electronics problem or use a completly different telescope from the spare we have...

EDIT 29/03/18 : After discussion with Laurent the option to use a new DSSD on T6 seems more appropriate, still ongoing.

Attachment 1: TimeMust2X_MUVI2_uncalib.png

Attachment 2: TimeMust2Y_MUVI2_uncalib.png

Attachment 3: SpectresMUVI2stripXT300ns.png

Update on Must2 telescopes

Tue Apr 3 10:44:38 2018

e744 : Val�rian

MUST2

Hardware

For the next day, the plan is to check the DSSD's connections of T6 & T7 followed by an alpha run, if the problem seen on T6 are not resolved, we will change the DSSD of T6 and re-do another alpha run, the last option would be to change the Muffee card.

Just for a quick visual update, telescopes 5&8 are dismounted and a new DSSD is mounted on T2 as you can see !

Attachment 1: 20180403_103732.jpg

Tue Apr 3 15:30:49 2018

After checking the cable of T6 & T7 it seems that there were in fact an inversion during experiment e748. T6 is the bottom one, and T7 the top one.

During e748, it seems that there were some difference regarding the position, between the hardware and software position...

If it was the case, it would mean that it is T6 that has the time calibration problem, not T7.
re-
In conclusion, it is T6 that has both the time calibration problem on X and Y, and the weird signal seen during the calibration.

EDIT 4/04/18 : For the experiment e748 and before the time calibration, the inversion had been made, as a conclusion what was previously stated is wrong, it is T7 that has no time calibration... Anyhow, wee will re-do the time calibration for T6 and T7 to check if the problem are still present.

Attachment 1: Inversion_between_telescopes.pdf

Wed Apr 4 17:49:05 2018

The EXL detector has been mounted, it is very close to the target ~4cm and doesn't do any shadow on the M2 telescopes. But it isn't at 90� anymore. The cable have been plugged-in (cf photos). With a new mapping of the detector (cf drawing).

Attachment 1: 20180404_113303.jpg

Attachment 2: 20180404_113312.jpg

Attachment 3: 20180404_135324.jpg

Attachment 4: 20180404_135334.jpg

Attachment 5: EXL_cables.pdf

Attachment 6: Mapping_of_EXL.pdf

Run #363 Calimero T1-T4 strips X again with threshold at 50% (same as 40%)

Tue May 22 22:33:09 2018

Run #363
NB: Thresholds are the ones on the pulser amplitude to inject the signal (Calimero Pulser interface on Geco). see snapshots on the Calimero summary.
Calimero with 50% thresholds on T4. Same spectra as with the thresholds @40%. I think T4 is triggering on cross-talk, so when the thresholds it's high it's ok.

Attachment 1: T1T4_Xstrips_run363.png

Run #365 Calimero strips Y T1-T4 100% Threshold

Tue May 22 22:50:47 2018

Run #365
Calimero strips Y T1-T4
100% threshold on T4
Something is wrong with the masking?!

Attachment 1: T1T4_Ystrips_run364.png

RUN #402, EXL PPT trigger

Wed May 23 00:30:34 2018

RUN #402
start exl ppt run for checking coincidence
exl ch 17 put in to adc2 ch 32

Wed May 23 18:20:59 2018

Test Calimero Run 425

Started run #425 Calimero NEW XT T1toT4
ampl Pulser 12MEV; thr for T4 1 MeV
problem on data taking

e755

Sat Jun 30 20:08:27 2018

didier, takeshi, daisuke

Attachment 1: scaler_2018-06-30_19h41m59s.png

Attachment 2: visu_2018-06-30_19h42m32s.png

Attachment 3: visu_2018-06-30_20h04m35s.png

Attachment 4: visu_2018-06-30_20h04m46s.png

Attachment 5: visu_2018-06-30_20h04m51s.png

Attachment 6: visu_2018-06-30_20h04m59s.png

Attachment 7: visu_2018-06-30_20h05m12s.png

Attachment 8: visu_2018-06-30_20h05m17s.png

Attachment 9: visu_2018-06-30_20h05m23s.png

Attachment 10: visu_2018-06-30_20h05m29s.png

Attachment 11: visu_2018-06-30_20h05m35s.png

Attachment 12: visu_2018-06-30_20h05m44s.png

Attachment 13: visu_2018-06-30_20h05m50s.png

Attachment 14: visu_2018-06-30_20h06m05s.png

Attachment 15: visu_2018-06-30_20h06m13s.png

Attachment 16: visu_2018-06-30_20h06m20s.png

Attachment 17: visu_2018-06-30_20h06m26s.png

Attachment 18: visu_2018-06-30_20h06m31s.png

Attachment 19: visu_2018-06-30_20h06m39s.png

Attachment 20: visu_2018-06-30_20h06m45s.png

Attachment 21: visu_2018-06-30_20h06m54s.png

Attachment 22: visu_2018-06-30_20h07m04s.png

Attachment 23: visu_2018-06-30_20h07m10s.png

Attachment 24: visu_2018-06-30_20h07m20s.png

Attachment 25: visu_2018-06-30_20h07m25s.png

Attachment 26: visu_2018-06-30_20h07m33s.png

Attachment 27: visu_2018-06-30_20h07m45s.png

Attachment 28: visu_2018-06-30_20h07m55s.png

didier, nori, takeshi, shumpei, hide, daisuke

e738

Fri Jul 13 22:00:59 2018

RUN

General

Cryo-LH2

RUN 376: 12C first run

12C + liquid H.
start 21h44
stop 22h43

Attachment 1: scaler_2018-07-13_21h59m16s.png

Attachment 2: screenshot_2018-07-13_21h54m55s.png

Attachment 3: visu_2018-07-13_21h54m41s.png

Attachment 4: visu_2018-07-13_21h58m06s.png

Attachment 5: visu_2018-07-13_21h58m08s.png

Attachment 6: visu_2018-07-13_21h58m10s.png

Attachment 7: visu_2018-07-13_21h58m13s.png

Attachment 8: visu_2018-07-13_21h58m15s.png

Attachment 9: visu_2018-07-13_21h58m17s.png

Attachment 10: visu_2018-07-13_21h58m23s.png

Attachment 11: visu_2018-07-13_21h58m28s.png

Attachment 12: visu_2018-07-13_21h58m32s.png

Attachment 13: visu_2018-07-13_21h58m36s.png

Attachment 14: visu_2018-07-13_21h58m41s.png

Attachment 15: visu_2018-07-13_21h58m23s.png

Attachment 16: visu_2018-07-13_21h58m28s.png

Attachment 17: visu_2018-07-13_21h58m32s.png

Attachment 18: visu_2018-07-13_21h58m36s.png

Attachment 19: visu_2018-07-13_21h58m41s.png

Attachment 20: visu_2018-07-13_21h58m45s.png

Attachment 21: visu_2018-07-13_21h58m49s.png

Attachment 22: visu_2018-07-13_21h58m54s.png