| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Fixed | e748 |
Sun Jun 25 09:53:44 2017 |
Adrien Matta | RUN | General | 3-alpha | Run 18 |
| Junk |
| Fixed | e748 |
Sun Jun 25 09:54:08 2017 |
Adrien Matta | RUN | General | 3-alpha | Run 19 |
Source: 3-alpha + 60Co
Trigger: T1-8 or EXL |
| Fixed | e748 |
Mon Jun 26 09:15:31 2017 |
Adrien Matta | RUN | General | 3-alpha | Run 19 : disk quota exceeded |
| Run 19 was still running this morning, but file stop writting at 6 O'Clock, when the disk quota exceeded (we wrtoe about 14Go of data, so not that much!) |
| Fixed | e748 |
Mon Jun 26 10:26:16 2017 |
Valérian | EXL | Software | 60Co | Add-back |
We implemented the add-back correction with cross-talk subtraction.
On the joined graph, RawEnergy correspond to the sum of the energy in every crystals and Energy correspond to the sum of energy in every crystals with the cross subtraction. |
| Attachment 1: addback.pdf
|
|
| Fixed | e748 |
Mon Jun 26 17:38:32 2017 |
e748 | MUST2 | General | N/A | CALIMERO |
| Luc and Greg fixed Calimero, We have to perform the calibration but there is some work going on with CATS. |
| Fixed | e748 |
Tue Jun 27 10:15:38 2017 |
e748 | DAQ | General | | Scalers |
CATS were added to the scalers:
T CATS1 : 3rd scaler channel
T CATS2 : 4th scaler channel |
| Fixed | e748 |
Tue Jun 27 13:47:15 2017 |
e748 | RUN | General | N/A | Run 21 |
Calib CATS1:
pedestal - x5 - x2 - full
--> "Bad" data - IGNORE |
| Fixed | e748 |
Tue Jun 27 13:47:57 2017 |
e748 | RUN | General | N/A | Run 22, 23 |
| JUNK |
| Fixed | e748 |
Tue Jun 27 13:48:22 2017 |
e748 | RUN | General | N/A | Run 24 |
CALIB CATS2:
x5 - x2 - full - pedestal
--> "Bad" data: IGNORE |
| Fixed | e748 |
Tue Jun 27 15:39:04 2017 |
e748 | RUN | General | N/A | Run 26 |
Calib Cats 2
pedestal, x5, x2, full
y= ax+b
CATS 2 X:
pedestal b a
0.00000e+00 0.00000e+00 0.00000e+00
3.34866e+02 1.73188e+02 1.07898e+00
4.27902e+02 1.42089e+01 1.07816e+00
4.13552e+02 3.10856e+01 1.02086e+00
4.00208e+02 6.17653e+01 1.00013e+00
3.57374e+02 1.09273e+02 9.21692e-01
3.77134e+02 1.24841e+02 9.30566e-01
4.67776e+02 6.89964e+01 1.00816e+00
4.56957e+02 7.81026e-02 9.72500e-01
4.91687e+02 -3.70330e+01 1.01447e+00
4.44520e+02 1.29315e+01 1.02924e+00
5.16241e+02 1.51421e+01 1.02187e+00
5.98725e+02 -1.99749e+01 1.06386e+00
5.88034e+02 4.53268e+00 1.04290e+00
5.93616e+02 5.28299e+00 1.03251e+00
4.57185e+02 1.05019e-12 1.00000e+00
3.64839e+02 8.55050e+01 9.99165e-01
3.68563e+02 8.43430e+01 9.93994e-01
4.22265e+02 3.90584e+01 1.03176e+00
5.59843e+02 7.74268e+01 1.02100e+00
4.59830e+02 1.11505e+02 9.92221e-01
4.75931e+02 1.13948e+02 9.87686e-01
1.13867e+03 -5.34852e+02 1.01375e+00
3.58569e+02 9.05469e+01 1.02335e+00
0.00000e+00 0.00000e+00 0.00000e+00
4.84610e+02 -2.91350e+01 1.13626e+00
5.53750e+02 6.83327e+00 1.03685e+00
0.00000e+00 2.47237e+03 1.07958e+00
CATS 2 Y:
pedestal b a
0.00000e+00 0.00000e+00 0.00000e+00
4.24831e+02 1.17597e+02 9.84481e-01
4.84448e+02 1.17596e+02 1.08003e+00
5.23981e+02 3.36635e+01 1.07637e+00
4.22131e+02 1.92245e+02 1.07637e+00
5.03330e+02 8.05487e+01 1.04232e+00
4.13404e+02 1.30024e+02 1.06911e+00
4.69403e+02 8.97913e+01 1.21310e+00
5.11508e+02 1.03630e+02 9.63055e-01
5.70794e+02 -4.75816e+01 9.86138e-01
3.91089e+02 3.31339e+01 9.86138e-01
2.91074e+02 1.80070e+02 1.00000e+00
3.94905e+02 2.11706e+02 1.14329e+00
5.93069e+02 -1.32967e+01 1.04232e+00
5.17529e+02 4.97861e+01 1.01332e+00
4.08273e+02 5.25097e-13 1.00000e+00
3.96650e+02 4.96131e+01 1.00198e+00
3.55425e+02 6.26946e+01 1.03495e+00
5.12050e+02 4.94409e+01 9.97120e-01
4.96649e+02 9.87188e+01 1.00343e+00
3.78996e+02 6.95147e+01 9.89215e-01
4.89862e+02 1.09019e+02 9.34211e-01
3.18767e+02 6.48178e+01 1.08574e+00
4.70483e+02 1.12218e+02 8.93626e-01
2.32420e+02 2.30826e+02 9.90101e-01
4.95295e+02 6.55162e+01 9.06830e-01
3.77947e+02 8.44817e+01 9.13469e-01
4.99835e+02 2.08303e+02 5.84923e-01 |
| Fixed | e748 |
Tue Jun 27 15:41:53 2017 |
e748 | RUN | General | N/A | Run 27 |
Calib CATS 1
pedestal, x5, x2, full
CATS 1 X:
pedestal b a
0.00000e+00 0.00000e+00 0.00000e+00
4.40603e+02 -3.48159e+01 1.02964e+00
6.02994e+02 -7.57725e+01 1.06784e+00
0.00000e+00 0.00000e+00 0.00000e+00
4.74491e+02 6.59788e+01 1.06378e+00
4.98303e+02 8.99406e+01 1.00901e+00
2.26891e+02 1.94228e+02 1.05105e+00
4.19835e+02 1.80672e+02 1.12100e+00
6.22464e+02 -1.25338e+02 1.10316e+00
5.31669e+02 -1.01516e+01 1.00506e+00
6.25393e+02 3.00074e+01 9.72394e-01
5.59032e+02 -3.31109e+01 1.01151e+00
4.89439e+02 -3.84630e+01 1.06460e+00
5.13102e+02 -1.02740e+02 9.81045e-01
5.94925e+02 -2.42060e+01 1.02663e+00
6.50631e+02 -2.10039e-12 1.00000e+00
3.32446e+02 1.50221e+02 1.00639e+00
5.30827e+02 1.52912e+01 9.96113e-01
5.00795e+02 8.48992e+01 9.62420e-01
4.68150e+02 1.10973e+02 1.00915e+00
5.06219e+02 7.55522e+01 9.16153e-01
3.93183e+02 1.10535e+02 9.42549e-01
5.08446e+02 6.54707e+01 9.72265e-01
4.84163e+02 8.22200e+01 9.73209e-01
4.80987e+02 9.04152e+01 9.39857e-01
0.00000e+00 0.00000e+00 0.00000e+00
4.90738e+02 -5.61319e+00 1.00593e+00
0.00000e+00 0.00000e+00 0.00000e+00
CATS 1 Y:
pedestal b a
0.00000e+00 0.00000e+00 0.00000e+00
0.00000e+00 0.00000e+00 0.00000e+00
1.25563e+03 -7.73916e+02 9.68701e-01
1.09961e+03 -4.55950e+02 9.29963e-01
6.49543e+02 -4.10113e+01 9.69826e-01
4.54606e+02 -2.49127e+02 1.65100e+00
5.87073e+02 -3.27254e+01 9.77807e-01
5.80789e+02 6.21338e+01 9.35535e-01
4.10148e+02 -5.15971e+02 2.65358e+00
6.31751e+02 -5.64590e+01 9.67075e-01
4.46256e+02 -1.00951e+02 1.05747e+00
5.75810e+02 -1.28067e+02 9.71718e-01
6.33016e+02 -1.64263e+02 1.00497e+00
4.07925e+02 -1.29901e+01 9.83705e-01
5.78569e+02 -1.78799e+02 9.90214e-01
4.76050e+02 -1.05019e-12 1.00000e+00
4.25520e+02 3.84749e+01 9.24456e-01
4.41018e+02 8.55021e+01 9.12943e-01
3.90032e+02 2.38231e+01 9.90214e-01
4.75086e+02 9.37774e+01 9.98264e-01
5.05763e+02 4.77228e+01 9.44267e-01
6.33737e+02 -1.11174e+02 9.08310e-01
6.30129e+02 -8.39653e+01 8.84702e-01
7.33337e+02 -1.32071e+02 8.95065e-01
5.36332e+02 -1.84979e+02 1.35717e+00
5.01813e+02 3.65279e+01 1.04815e+00
4.93026e+02 2.93335e+01 8.22334e-01
5.89562e+02 1.15050e+02 6.25701e-01 |
| Fixed | e748 |
Tue Jun 27 17:41:17 2017 |
e748 | RUN | General | 3-alpha | run 28 |
Started run #28
3-alpha
Junk, source not well positionned |
| Fixed | e748 |
Tue Jun 27 17:51:24 2017 |
e748 | RUN | General | 3-alpha | Run 29 |
Started run #29 at 17h45
3-alpha around 90deg |
| Fixed | e748 |
Wed Jun 28 10:52:15 2017 |
Valérie Lapoux | MUST2 | General | | Memo for CALIMERO MUST2 Time Calibration |
| Temporary file indicating the main steps for the time calibration of MUST2 using the Calimero DAQ package program. |
| Attachment 1: ConfigDAQDasCalimerov2017vlxTMP.pdf
|
|
| Fixed | e748 |
Wed Jun 28 10:54:34 2017 |
Valérie Lapoux | RUN | Software | | DAQ problems due to TCP/IP errors |
Problems occurred during the run #29 at 2h38 Wed. 28th June, with the following error messages written in the Run Control GUI window:
Error rcc MUST2:VMECOM :TCP error TCP/IP time-out |
| Attachment 1: ProblemRun29TCPerror.png
|
|
| Fixed | e748 |
Wed Jun 28 11:02:38 2017 |
Valérie Lapoux | RUN | General | 3-alpha | Calibration run #31 with Alpha source - MM5 and MM8 |
Run #31 started at 11:01, Wednesday 28th June.
The alpha source is rotated towards the telescopes 5, 8. |
| Attachment 1: Run31startNarvalAlphaSource.png
|
|
| Fixed | e748 |
Wed Jun 28 11:42:06 2017 |
e748 | CATS | General | N/A | Surveyor's positions CATS |
|
| Attachment 1: Position_geometre_CATS.png
|
|
| Fixed | e748 |
Wed Jun 28 15:07:43 2017 |
Thomas | CHIO | Software | N/A | Trapezoidal filter for CHIO |
const int nCHIO=200; // nb samples. sera ajuste en manip
float SIG[nCHIO];
int k=25; /// PLATEAU
int l=5; /// INTEGRATION
float M=300.; /// PZC
float vn, vnk, vnl, vnkl, dkl[nCHIO], p[nCHIO], r[nCHIO], s[nCHIO];
float THR=2.E5; // Seuil a ajuster en fonction de "l"
float Max=0;
int nPREV=5; // pour calcul baseline, a ajuster en ligne
int nBL=5; // pour calcul baseline, a ajuster en ligne
int tTHR=0;
float BLmean=0;
for(int i=0;i<nCHIO;i++)
{
vn=CHIO; // vecteur CHIO[]: samples
if(i-k>=0) vnk=CHIO[i-k];
else vnk=0;
if(i-l>=0) vnl=CHIO[i-l];
else vnl=0;
if(i-k-l>=0) vnkl=CHIO[i-k-l];
else vnkl=0;
dkl=vn-vnk-vnl+vnkl;
if(i>0) p=p[i-1]+dkl;
else p=dkl;
r=p+M*dkl;
if(i>0) s=s[i-1]+r;
else s=r;
if(i>0) SIG=s[i-1]+r;
else SIG=r;
hCHIO_FILTER->SetBinContent(i+1,SIG);
//if(SIG>Max) Max=SIG;
if(SIG>THR && i>nPREV+nBL && tTHR==0) tTHR=i;
if(tTHR)
{
for(int j=tTHR-(nPREV+nBL);j<tTHR-nPREV;j++) BLmean+=SIG;
BLmean/=nBL;
if(SIG>Max) Max=SIG;
if(i<nCHIO-1 && SIG<Max && SIG[i+1]<Max)
{
hECHIO_RAW->Fill(Max);
tTHR=0;
}
}
} |
| Fixed | e748 |
Wed Jun 28 15:17:24 2017 |
Valérie Lapoux | RUN | General | | End of run 31-status |
Run #31 started at 11h01; stopped at 15h13
Problem on ganlx9 VME Chio
TIMEOUT on the stop process. |
| Attachment 1: Run31stopProbTimeoutGanlx9Chio.png
|
|
| Fixed | e748 |
Thu Jun 29 10:44:45 2017 |
e748 | TARGET | Hardware | CD2 | Target and Mask are Mounted |
We mounted the target and mask in the chamber before closing:
The target order on the ladder is the following, starting from the bottom (Target ladder fully flushed inside the chamber with no spacer):
Target size: outside: 30 by 50mm inside 25 by 40mm.
No spacer: Mask
30mm spacer: 1.5mg/cm2
60mm spacer: 2.5mg/cm2
90mm spacer: 1.5mg/cm2
120mm spacer: 2.5mg/cm2
150mm: no target (no target frame, just the ladder) |
| Attachment 1: IMG_1973.JPG
|
|
| Attachment 2: IMG_1954.JPG
|
|
| Attachment 3: IMG_1953.JPG
|
|
| Attachment 4: IMG_1974.JPG
|
|