MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 86 of 132  Not logged in MUGAST
 Find |  Login 
 Full | Summary | Threaded | Hide attachments  Show only new entries   2636 Entries 
Goto page Previous  1, 2, 3 ... 85, 86, 87 ... 130, 131, 132   Next  
Status ExpNbr Date Author Type Categorydown Target-Source Subject
Fixede786s Tue Jun 25 08:23:58 2019 Valerian BEAMGeneralN/ABeam status
Currently there is no beam since 22h-> Thunder + no more 48Ca sample. The sample was out during the night.

The "sourcier" on-call arrived at 8h15. By talking to people in shift at the PCP they told me that more will be known ~10am-11am. Beam is expected to be back around 12am.
Fixede786s Tue Jun 25 10:51:59 2019 OttoRunRUNGeneral152EuRun57
*************************
Run : 57
*************************

Start at 2019-06-25 10:50:03.672363

152Eu source @ AGATA

Stop at 2019-06-25 14:36:40.442175
Stop comment: end ; source removed
Fixede786s Tue Jun 25 11:55:12 2019 mugastOFFLINEGeneralCryo-3HeHere is the F***G gs
We added the correct deformation of the target thickness, and corrected for it with the angle dependance.
15 um Water
Correct beam energy
Correct target position
Run 56 only
Attachment 1: Run56_better.pdf
Run56_better.pdf
Fixede786s Tue Jun 25 15:33:40 2019 A LemassonVAMOSGeneral VAMOS Analysis - Brho
VAMOS Analysis :
VAMOS PID with attached SetAlias.C

Suggestion to change Brho from 1.05 to 0.95 based on the distribution of K ions to optimize acceptance on the K
ions
Attachment 1: dEE_r56.png
dEE_r56.png
Attachment 2: Q_vs_Xf_All_r56.png
Q_vs_Xf_All_r56.png
Attachment 3: Q_vs_Xf_K_r56.png
Q_vs_Xf_K_r56.png
Attachment 4: Brho_E_K_r56.png
Brho_E_K_r56.png
Attachment 5: Q_MQ_K_r56.png
Q_MQ_K_r56.png
Attachment 6: SetAlias.C 
char cond[1000];
TTree *t1;
void SetAlias()
{
  gStyle->SetPalette(1);

  t1 = (TTree*) gROOT->FindObject("AD")
;
  t1->SetAlias("fExist_DC_Y","DC0_Y>-1500&&DC1_Y>-1500&&DC2_Y>-1500&&DC3_Y>-1500"); 
  t1->SetAlias("fExist_IC","IC[0]>0&&IC[1]>0&&IC[2]>0&&IC[3]>0"); 

  t1->SetAlias("mT","(T_FPMW_CATS2_C*-1 + 305.3 + -4*(MWTVN==8)-1*(MWTVN==9)-1*(MWTVN==10)-2.2*(MWTVN==11)-0.7*(MWTVN==12)-0.5*(MWTVN==15)-0.6*(MWTVN==16)-1.1*(MWTVN==17)+0.6*(MWTVN==18)-1*(MWTVN==6)-0.5*(MWTVN==5)-0.5*(MWTVN==4)-1.5*(MWTVN==3))*(T_FPMW_CATS1_C>10)");
  t1->SetAlias("mD","D");
  t1->SetAlias("mV","(mD)/mT");
  t1->SetAlias("mBeta","mV/29.9792");
  t1->SetAlias("mGamma","1./sqrt(1.0-mBeta*mBeta)");
  
  t1->SetAlias("mM_Q","Brho/3.107/mBeta/mGamma");
  t1->SetAlias("mM","(mE)/931.5016/(mGamma-1.)");
  t1->SetAlias("mMr","mM_Q*((13.*qmq13+14.*qmq14+15.*qmq15+16.*qmq16))"); 
  t1->SetAlias("mQ","mM/mM_Q");
 
  //t1->SetAlias("mT1","(T_FPMW_HF_C*-1. + 559. + 3*(MWTVN==8))*(T_FPMW_HF_C>10)");
  t1->SetAlias("mT1","1.5+((23.7593+1.03259*MWTV)*(MWTVN==0)+(-9.53168+1.0711*MWTV)*(MWTVN==1)+(-30.486+1.11554*MWTV)*(MWTVN==2)+(-31.1261+1.11624*MWTV)*(MWTVN==3)+(-62.99829+1.1569*MWTV)*(MWTVN==4)+(-47.9021+1.13413*MWTV)*(MWTVN==5)+(-14.3957+1.08086*MWTV)*(MWTVN==6)+(-24.6655+1.1058*MWTV)*(MWTVN==7)+(60.4375+0.981809*MWTV)*(MWTVN==8)+(4.44472+1.06168*MWTV)*(MWTVN==9)+(11.408+1.04492*MWTV)*(MWTVN==10)+(56.8282+0.990287*MWTV)*(MWTVN==11)+(59.6833+0.995356*MWTV)*(MWTVN==12)+(27.6344+1.02846*MWTV)*(MWTVN==13)+(6.02794+1.06554*MWTV)*(MWTVN==14)+(20.1561+1.0342*MWTV)*(MWTVN==15)+(51.0718+1.01008*MWTV)*(MWTVN==16)+(36.5605+1.0391*MWTV)*(MWTVN==17)+(-6.01158+1.09581*MWTV)*(MWTVN==18)+(37.6143+1.00939*MWTV)*(MWTVN==19)+(29.3289+1.01291*MWTV)*(MWTVN==20) + 3*83.4*(GATCONF_MASTER==8)-0*(GATCONF_MASTER==1)-2*83.4*(GATCONF_MASTER==4))");
  t1->SetAlias("mT1","540-2*T_FPMW_CATS2_C");
  t1->SetAlias("mE1","(IC[0]+IC[1]+IC[2]+IC[3]+IC[4])*(IC[0]>0.1&&IC[1]>0.1&&IC[2]>0.1&&IC[3]>0.1)");
  //  t1->SetAlias("mE1","(IC[1]+IC[2]+IC[3])*(IC[1]>1&&IC[2]>1&&IC[3]>1)");
  t1->SetAlias("mdE0","IC[0]*(IC[0]>1)");
  t1->SetAlias("mdE1","IC[0]*(IC[0]>1)+IC[1]*(IC[1]>1)");
  t1->SetAlias("mD1","Path");
  t1->SetAlias("mV1","mD1/(mT1)");
  t1->SetAlias("mBeta1","mV1/29.9792");
  t1->SetAlias("mGamma1","1./sqrt(1.0-mBeta1*mBeta1)");
  
  t1->SetAlias("mM_Q1","Brho/3.107/mBeta1/mGamma1");
  t1->SetAlias("mM1","1.3*(mE1)/931.5016/(mGamma1-1.)");
  t1->SetAlias("mMr","mM_Q*((13.*qmq13+14.*qmq14+15.*qmq15+16.*qmq16))"); 
  t1->SetAlias("mQ1","mM1/mM_Q1");
  t1->SetAlias("ProjD","-174.*1.");
  t1->SetAlias("Xt","TMW1_X+ProjD*tan(TP_Theta/1000.)");
  t1->SetAlias("Yt","TMW1_Y+ProjD*tan(TP_Phi/1000.)");

 
  t1->SetAlias("mT2","540.5-2.*T_FPMW_CATS2_C+2.7*(MWTVN==16)+2.7*(MWTVN==15)+2.9*(MWTVN==14)+2.9*(MWTVN==13)+2.4*(MWTVN==12)+1.3*(MWTVN==11)+1.5*(MWTVN==10)+1.6*(MWTVN==9)-0.6*(MWTVN==8)+2.5*(MWTVN==7)+2.*(MWTVN==6)+1.6*(MWTVN==5)+1.1*(MWTVN==4)-0.6*(MWTVN==3)-1.2*(MWTVN==2)-4.0*(MWTVN==1)");

 //t1->SetAlias("mT2","mT1-TMWT1_MWT2_C+31");
  //  t1->SetAlias("mT2","mT1-4.83");

  t1->SetAlias("mdE2","(IC[0]+IC[1]*(IC[0]>0.1)");

 t1->SetAlias("mE2","0.85*(pow(Xf+450*tan(Tf/1000.),2)*0.0000015*IC[0] + 2.2*IC[0]+1.1*IC[1]*(IC[0]>0.1)+1.34*1.95*IC[2]*(IC[0]>0.1)*(IC[1]>0.1)+3.1*IC[3]*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)+1.05*IC[4]*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)*(IC[3]>0.1)+IC[5]*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)*(IC[3]>0.1)*(IC[4]>0.1))");

 // t1->SetAlias("mE2","0.825*(2.4*IC[0]+IC[1]*(IC[0]>0.1)+1.5*1.95*IC[2]*(IC[0]>0.1)*(IC[1]>0.1)+3.16*IC[3]*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)+1.1*IC[4]*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)*(IC[3]>0.1)+IC[5]*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)*(IC[3]>0.1)*(IC[4]>0.1))");

//t1->SetAlias("mE2","IC[0]+IC[1]*(IC[0]>0.1)+2*IC[2]*(IC[0]>0.1)*(IC[1]>0.1)+2*IC[3]*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)+IC[4]*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)*(IC[3]>0.1)+IC[5]*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)*(IC[3]>0.1)*(IC[4]>0.1)");
   t1->SetAlias("mdE21","(IC[0]+IC[1])*(IC[0]>1&&IC[1]>0.1)");
 t1->SetAlias("mE21","(IC[0]+IC[1]+2*IC[2]+2*IC[3]+IC[4]+IC[5])*(IC[0]>0.1)*(IC[1]>0.1)*(IC[2]>0.1)*(IC[3]>0.1)");
 t1->SetAlias("mD2","Path+5");
  t1->SetAlias("mV2","mD2/(mT2)");
  t1->SetAlias("mBeta2","mV2/29.9792");
  t1->SetAlias("mGamma2","1./sqrt(1.0-mBeta2*mBeta2)");
  
  t1->SetAlias("mM_Q2","Brho/3.105/mBeta2/mGamma2");
  t1->SetAlias("mM2","(mE2)/931.5016/(mGamma2-1.)");
  t1->SetAlias("mQ2","mM2/mM_Q2");
  t1->SetAlias("mMrec","int(mQ2+0.5)*mM_Q2");
  
  t1->SetAlias("Gamma_from_E","mE2/14./931.5016+1");
  t1->SetAlias("Beta_from_E","sqrt(1.-1./pow(Gamma_from_E,2))");
  t1->SetAlias("Brho_from_E","14./8*3.105*Beta_from_E*Gamma_from_E");

  t1->SetAlias("mEM","(3.7*IC[0]+IC[1]+IC[2]+IC[3]*(IC[2]>0.1)+18./55*IC[4]*(IC[3]>0.1&&IC[2]>0.1) + 7.*IC[5]*(IC[4]>0.1&&IC[3]>0.1&&IC[2]>0.1) )*(IC[0]>1&&IC[1]>0.1&&IC[2]>1&&IC[3]>1)");

}
Attachment 7: Mr_K_r56.png
Mr_K_r56.png
Attachment 8: QMQ_K_Gates.png
QMQ_K_Gates.png
Fixede786s Tue Jun 25 16:58:53 2019 OttoRunRUNGeneralCryo-3HeRun58
========================================
*************************
Run : 58
*************************

Start at 2019-06-25 16:56:44.425517

target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

Beam is back
scaler_run_58.png taken at the beginning of the run.

Stop at 2019-06-26 05:02:52.980409
Stop comment:
Fixede786s Tue Jun 25 18:14:38 2019 OttoRunRUNGeneralCryo-3HeRun58

OttoRun wrote:
*************************
Run : 58
*************************

Start at 2019-06-25 16:56:44.425517

target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

Beam is back
scaler_run_58.png taken at the beginning of the run.


In the CATS position spectra the central part is missing.
It is possible that the gain is two high for the actual high intensity of the beam.
Attachment 1: cats_run_58.png
cats_run_58.png
Fixede786s Tue Jun 25 22:20:36 2019 FrancoRUNGeneralCryo-3HeRun58

OttoRun wrote:

OttoRun wrote:
*************************
Run : 58
*************************

Start at 2019-06-25 16:56:44.425517

target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

Beam is back
scaler_run_58.png taken at the beginning of the run.


In the CATS position spectra the central part is missing (maybe for the high intensity of the beam?).
We can anyway recover the time information.

After the decrease of the high voltage of VAMOS drift chamber to avoid saturation of the signals
the BRho resolution has worsened of about 25% (see attachment). We will now increase it again (h. 22.30).
Attachment 1: BRho_run58.png
BRho_run58.png
Fixede786s Tue Jun 25 23:55:34 2019 FrancoRUNGeneralCryo-3HeRun58

Franco wrote:

OttoRun wrote:

OttoRun wrote:
*************************
Run : 58
*************************

Start at 2019-06-25 16:56:44.425517

target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

Beam is back
scaler_run_58.png taken at the beginning of the run.

scaler_run_58.png is taken after 7h.


In the CATS position spectra the central part is missing (maybe for the high intensity of the beam?).
We can anyway recover the time information.

After the decrease of the high voltage of VAMOS drift chamber to avoid saturation of the signals
the BRho resolution has worsened of about 25% (see attachment). We will now increase it again (h. 22.30).
Attachment 1: scaler_run_58_2.png
scaler_run_58_2.png
Fixede786s Wed Jun 26 03:46:09 2019 FreddyRUNGeneralCryo-3HeRun 58 -screenshots
Screenshots at 3h30 on the 26th of june during RUN 58
Attachment 1: run58_CATS_26062019_3h39.png
run58_CATS_26062019_3h39.png
Attachment 2: run58_Correl_26062019_3h39.png
run58_Correl_26062019_3h39.png
Attachment 3: run58_TAC_26062019_3h39.png
run58_TAC_26062019_3h39.png
Attachment 4: run58_MGdETOF_26062019_3h39.png
run58_MGdETOF_26062019_3h39.png
Attachment 5: run58_MGImpact_26062019_3h39.png
run58_MGImpact_26062019_3h39.png
Attachment 6: run58_MMImpact_26062019_3h39.png
run58_MMImpact_26062019_3h39.png
Fixede786s Wed Jun 26 03:55:20 2019 FreddyOFFLINEGeneralN/ARun conversion with AGATA
To convert a run including the AGATA data, here is the procedure (Only if you know reasonably what you are doing Wink

1- Go to the AGATA Analysis computer, open a terminal and execute the following commands:

> a4
> t e786s
> cd Replay
> ./do_global_replay.sh -run ## (## is the run number you want to convert)

2- When it is finished copy the root file to the GANIL world:

> mkdir /dataganil/e786s/acquisition/root_agata/run_00##/
> cp ./run_00##/Out/Analysis/Tree_00*.root /dataganil/e786s/acquisition/root_agata/run_00##/.
Fixede786s Wed Jun 26 04:54:07 2019 FreddyAGATAGeneralN/AAGATA validation problem (solved)
Since about 4h20, we realized that AGATA validated events and timestamps have suddenly dropped on the AGATA display (yellow bars instead of green).
We checked the counting rate on MUGAST, VAMOS and FAG and there is no obvious problem on this side. Same for the MUGAST/VAMOS data on disk.

We call Emmanuel...

Problem solved by restarting entirely GTS Tree (that was broken).

Restarted at 5h37 with run 59. (it took about 30 min).
Fixede786s Wed Jun 26 05:33:50 2019 OttoRunRUNGeneralCryo-3HeRun59
*************************
Run : 59
*************************

Start at 2019-06-26 05:32:53.325868

target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

5 to 5h30 - Restarted GTS Tree by Emmanuel
6h00 - Validation broken again

Stop at 2019-06-26 09:44:56.521500
Stop comment: Stopping to Realign GTS Tree
Fixede786s Wed Jun 26 05:58:23 2019 FreddyOFFLINEGeneralN/AOffline analysis run 56 and 58
Attachment 1: run56-58_analysis.png
run56-58_analysis.png
Attachment 2: run56-59_analysis_gammarays.png
run56-59_analysis_gammarays.png
Attachment 3: run56_analysis.png
run56_analysis.png
Attachment 4: run58_analysis.png
run58_analysis.png
Fixede786s Wed Jun 26 07:01:00 2019 FreddyAGATAGeneralN/AAGATA validation problem - again - during run 59
30 min after Emmanuel left (around 6h00), the AGATA problem of validation reappeared...

TO BE SOLVED....
Fixede786s Wed Jun 26 07:04:06 2019 FreddyCATSGeneralN/AUpdate of CATS calibrations
New calibrations in :
/home/mugast/analysis/nptool/Projects/calibration/cats/CATS2_X.vamos2019_e786s.npt
/home/mugast/analysis/nptool/Projects/calibration/cats/CATS2_X.vamos2019_e786s.npt

Calibration.txt was modified accordingly.
Attached are the CATS positions for run 56 and 58 (after the central strip problem)
Attachment 1: run56_cats_newcal.png
run56_cats_newcal.png
Attachment 2: run_58_cats_newcal.png
run_58_cats_newcal.png
Fixede786s Wed Jun 26 09:56:17 2019 Valerian and AdrienRUNGeneralCryo-3HeIdentification E-TOF MUGAST
Light particle ID in MUGAST (no S1 because shitty time).

The red cut is on what we believe is deuterium.

The containt of the cut stop at 8MeV when gating on vamos.
Attachment 1: ETOF_d.pdf
ETOF_d.pdf
Attachment 2: ETOF_d_vamos.pdf
ETOF_d_vamos.pdf
Fixede786s Wed Jun 26 10:29:30 2019 OttoRunRUNGeneralCryo-3HeRun60
========================================
*************************
Run : 60
*************************

Start at 2019-06-26 10:21:51.572979

target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

Restarted GTS Tree by Emmanuel

Stop at 2019-06-26 17:59:14.820418
Stop comment: change of Brho
Fixede786s Wed Jun 26 13:48:35 2019 mugastOFFLINEGeneralCryo-3Heanalysis
Attachment 1: Ekine_Ex_run56_58.png
Ekine_Ex_run56_58.png
Fixede786s Wed Jun 26 14:40:58 2019 OttoRunRUNGeneralCryo-3HeRun60

OttoRun wrote:
*************************
Run : 60
*************************

Start at 2019-06-26 10:21:51.572979

target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

Restarted GTS Tree by Emmanuel
Attachment 1: run60.png
run60.png
Attachment 2: run60_1.png
run60_1.png
Attachment 3: run60_2.png
run60_2.png
Attachment 4: run60_3.png
run60_3.png
Attachment 5: run60_4.png
run60_4.png
Attachment 6: run60_5.png
run60_5.png
Fixede786s Wed Jun 26 15:48:50 2019 OttoRunRUNGeneralCryo-3HeRun60

OttoRun wrote:

OttoRun wrote:
*************************
Run : 60
*************************

Start at 2019-06-26 10:21:51.572979

target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

Restarted GTS Tree by Emmanuel


No beeam from 15.00. According to PCP, there will be no beam for a while
Attachment 1: run60_6.png
run60_6.png
Goto page Previous  1, 2, 3 ... 85, 86, 87 ... 130, 131, 132   Next  

ELOG Home Page