MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 36 of 132  Not logged in MUGAST
Status ExpNbr Date Author Type Category Target-Source Subjectdown
Fixede793s Wed Mar 17 11:27:40 2021 OttoRunRUNGeneralCD2Run65
*************************
Run : 65
*************************

Start at 2021-03-17 11:27:39.713056

run64. ACQ DT

Restart due to VAMOS data file not writing


Beam: 4.0e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%

Stop at 2021-03-17 11:39:19.937777
Stop comment:
Fixede793s Wed Mar 17 11:39:39 2021 OttoRunRUNGeneralCD2Run65
*************************
Run : 65
*************************

Start at 2021-03-17 11:39:39.478820

run64. ACQ DT

Restart due to VAMOS data file not writing


Beam: 4.0e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%

Stop at 2021-03-17 11:51:39.660593
Stop comment:

Stop at 2021-03-17 17:00:18.563101
Stop comment:

Stop at 2021-03-17 17:00:19.130669
Stop comment:

Stop at 2021-03-17 17:00:19.296398
Stop comment:

Stop at 2021-03-17 17:00:19.488363
Stop comment:

Stop at 2021-03-17 17:00:19.636196
Stop comment:
Fixede744s Thu Apr 11 01:21:39 2019 OttoRunRUNGeneralCH2Run64
*************************
Run : 64
*************************

Start at 2019-04-11 01:21:02.741720

Run Conditions:
  • Operator: A. Lemasson
  • Trigger: VAMOS
  • Target/Source: CH2 100 um (Position 3)
  • Beam: 14N
  • Intensity: ~ 2e+4
  • Brho = 0.79067 Tm
  • CATS 2 IN


Comment:
Data OK for Reference Target Thickness measurement

Same as run 60 after DAQ NARVAL crash. (DC not sending Data, Kill Narval on ganp507 and vamosng)
AGAIN After Crash CRASH in NUMEXO 63 - BI STORAGE error

(01:22:48 - 11/04/2019) FATAL - log from NARVAL.NUMEXO2_61 - Bloc_Catcher.T_Communication : requested size too high available in actor 1024 requested in header 5376 do not use this actor

(01:22:48 - 11/04/2019) FATAL - log from NARVAL.NUMEXO2_61 - NUMEXO2_61 put sub system NARVAL in error with message :Bloc_Catcher.T_Communication : actor buffer size too small

(01:22:48 - 11/04/2019) ERROR - log from NARVAL.NUMEXO2_61 - Bloc_Catcher.T_Communication : BlC : exception,STORAGE_ERROR,s-intman.adb:136 explicit raise

(01:22:48 - 11/04/2019) ERROR - log from NARVAL.NUMEXO2_61 - Bloc_Catcher.T_Communication : BPR2 : exception,STORAGE_ERROR,s-intman.adb:136 explicit raise

(01:22:48 - 11/04/2019) ERROR - log from NARVAL.NUMEXO2_61 - Bloc_Catcher.T_Communication : BPR ,STORAGE_ERROR,s-intman.adb:136 explicit raise

(01:22:48 - 11/04/2019) ERROR - log from NARVAL.NUMEXO2_61 - Bloc_Catcher.T_Communication : exception ,STORAGE_ERROR,s-intman.adb:136 explicit raise



Fixede768s Wed Jul 17 05:47:48 2019 OttoRunRUNGeneralLiFRun64
*************************
Run : 64
*************************

Start at 2019-07-17 05:47:36.706623

15N beam -- data tacking


Target #1 1.25 mg/cm2

Brho = 0.640 Tm


plastic off
diamond on

mask: +7 mm

beam intensity ~5e7

Stop at 2019-07-17 06:00:13.423330
Stop comment:
Fixede793s Wed Mar 17 07:21:23 2021 OttoRunRUNGeneralCD2Run64
*************************
Run : 64
*************************

Start at 2021-03-17 07:20:12.195520

run64. ACQ DT

Restart due to VAMOS data file not writing


Beam: 4.0e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%

Stop at 2021-03-17 10:05:42.524724
Stop comment: End of e793s
Fixede793s Mon Mar 8 17:47:29 2021 mugastGRITGeneralN/ARun632 - TACs calibration (part 2)
TAC calibration.

VAMOS-CATS2 (range 2 us)
Mugast-VAMOS (range 2 us )
Mugast-AGATA (range 2 us)

Time calibrator

2.56 us range
40 ns steps
Fixede793s Mon Mar 8 17:21:14 2021 mugastGRITGeneralN/ARun631 - TACs calibration (part 1)
*************************
Run : 631
*************************

Start at 2021-03-08 17:19:55.467916

TAC calibration.

  • FAG-CATS2 (range 500 ns)
  • Vamos-Agata (range 500 ns)
  • CATS2-CATS2 (not in modular label) (range 500 ns)

Time calibrator
  • 640 ns range
  • 20 ns steps
Fixede793s Sat Mar 6 13:25:38 2021 OttoRunRUNGeneral3-alphaRun630
*************************
Run : 630
*************************

Start at 2021-03-06 13:15:07.038908

run 3 alpha. time calibrator is on but is not giving any trigger so just sending random stop

Stop at 2021-03-08 09:50:00.232468
Stop comment:

Stop at 2021-03-08 15:28:10.213189
Stop comment:

Stop at 2021-03-08 15:28:10.881754
Stop comment:

Stop at 2021-03-08 15:28:11.447832
Stop comment:
Fixede793s Mon Mar 15 22:26:15 2021 Laetitia, SergeONLINEGeneralCD2Run63 screenshots at 22h30
Attachment 1: run63_mmimpact_22h30.png
run63_mmimpact_22h30.png
Attachment 2: run63_vamos_22h30.png
run63_vamos_22h30.png
Attachment 3: run63_fsc_22h30.png
run63_fsc_22h30.png
Attachment 4: run63_tac_22h30.png
run63_tac_22h30.png
Attachment 5: run63_mgtof_22h30.png
run63_mgtof_22h30.png
Attachment 6: run63_mmdE_22h30.png
run63_mmdE_22h30.png
Attachment 7: run63_mmtof_22h30.png
run63_mmtof_22h30.png
Attachment 8: run63_mgimpact_22h30.png
run63_mgimpact_22h30.png
Attachment 9: run63_graph_22h30.png
run63_graph_22h30.png
Attachment 10: run63_sclalers_22h30.png
run63_sclalers_22h30.png
Attachment 11: run63_Etheta_22h30.png
run63_Etheta_22h30.png
Fixede744s Thu Apr 11 01:16:30 2019 OttoRunRUNGeneralCH2Run63
*************************
Run : 63
*************************

Start at 2019-04-11 01:16:17.572487

Run Conditions:
  • Operator: A. Lemasson
  • Trigger: VAMOS
  • Target/Source: CH2 100 um (Position 3)
  • Beam: 14N
  • Intensity: ~ 2e+4
  • Brho = 0.79067 Tm
  • CATS 2 IN


Comment:
Same as run 60 after DAQ NARVAL crash. (DC not sending Data, Kill Narval on ganp507 and vamosng)
AGAIN After Crash
Fixede786s Thu Jun 27 03:33:26 2019 OttoRunRUNGeneralCryo-3HeRun63
*************************
Run : 63
*************************

Start at 2019-06-27 03:33:09.910218

target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

Crate in System faillure.
Moving FIFO FPMW to other crate. Had to change the cable (3ns to 5ns).
To be accounted for in the TOF

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Current ~ 30 kHz.
The cryo target pressure and temperature have slightly increased during the stop for the recover of AGATA, even before the refilling of the LHe tank.
It is probably due to a problem in the refilling of liquid nitrogen.

Stop at 2019-06-27 11:46:17.108352
Stop comment: stop
Fixede768s Wed Jul 17 05:32:57 2019 OttoRunRUNGeneralLiFRun63
*************************
Run : 63
*************************

Start at 2019-07-17 05:31:29.265385

15N beam -- data tacking


Target #1 1.25 mg/cm2

Brho = 0.640 Tm


plastic off
diamond on

mask: +7 mm

beam intensity ~5e7

Stop at 2019-07-17 05:44:09.843571
Stop comment:
Fixede793s Fri Mar 5 16:39:08 2021 OttoRunRUNGeneral3-alphaRun620
*************************
Run : 620
*************************

Start at 2021-03-05 16:38:16.476202

run 3 alpha without pedestal for all detectors, to be used for experiment

Stop at 2021-03-05 16:56:13.657279
Stop comment: type your message here

Stop at 2021-03-05 16:56:14.690583
Stop comment: type your message here

Stop at 2021-03-05 16:56:15.050212
Stop comment: type your message here

Stop at 2021-03-05 16:56:16.082040
Stop comment:

Stop at 2021-03-05 17:13:59.790265
Stop comment:

Stop at 2021-03-05 17:15:58.879697
Stop comment:

Stop at 2021-03-06 13:25:23.248954
Stop comment:

Stop at 2021-03-06 13:25:23.504734
Stop comment:

Stop at 2021-03-06 13:25:23.873972
Stop comment:
Fixede744s Thu Apr 11 01:09:05 2019 OttoRunRUNGeneralCH2Run62
*************************
Run : 62
*************************

Start at 2019-04-11 01:08:38.422386

Run Conditions:
  • Operator: A. Lemasson
  • Trigger: VAMOS
  • Target/Source: CH2 100 um (Position 3)
  • Beam: 14N
  • Intensity: ~ 2e+4
  • Brho = 0.79067 Tm
  • CATS 2 IN


Comment:
Same as run 60 after DAQ NARVAL crash. (DC not sending Data, Kill Narval on ganp507 and vamosng)
Target inserted (100 um ) and Cats2 in
Placing Finger on The beam
Vamos IC10 placed in IC12 electronics
Fixede786s Wed Jun 26 18:12:18 2019 OttoRunRUNGeneralCryo-3HeRun62
*************************
Run : 62
*************************

Start at 2019-06-26 18:09:42.882502

target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted

AGATA position +51-25 mm

TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000

Crate in System faillure.
Moving FIFO FPMW to other crate. Had to change the cable (3ns to 5ns).
To be accounted for in the TOF

Stop at 2019-06-27 02:19:17.492600
Stop comment: Problems with AGATA, run stopped
Fixede793s Sat Mar 13 07:18:10 2021 OttoRunRUNGeneralCD2Run62
*************************
Run : 62
*************************

Start at 2021-03-13 07:17:49.732042

run62. ACQ DT


starting again after centering the beam on the target

Beam: 3.5e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%

Stop at 2021-03-15 10:05:15.581255
Stop comment: stop run

Stop at 2021-03-17 07:17:25.231024
Stop comment: Vamos stopped writing data at 06:50
Fixede793s Fri Mar 5 16:31:08 2021 OttoRunRUNGeneral3-alphaRun619
*************************
Run :619
*************************

Start at 2021-03-05 16:30:39.722907

run 3 alpha without pedestals for MG but with pedestals for MM
Fixede793s Fri Mar 5 16:14:21 2021 OttoRunRUNGeneral3-alphaRun618
*************************
Run : 618
*************************

Start at 2021-03-05 16:13:37.198228

run 3 alpha with pedestal and mugast DAQ
Attachment 1: MGRAWEY.png
MGRAWEY.png
Attachment 2: MGRAWEX.png
MGRAWEX.png
Attachment 3: MMRAWEY.png
MMRAWEY.png
Attachment 4: MMRAWEX.png
MMRAWEX.png
Fixede744s Thu Apr 11 01:05:35 2019 OttoRunRUNGeneralCH2Run61
*************************
Run : 61
*************************

Start at 2019-04-11 01:04:59.561319

Run Conditions:
  • Operator: A. Lemasson
  • Trigger: VAMOS
  • Target/Source: CH2 100 um (Position 3)
  • Beam: 14N
  • Intensity: ~ 2e+4
  • Brho = 0.79067 Tm
  • CATS 2 IN


Comment:
Same as run 60 after DAQ NARVAL crash. (broken link 102 ???)
Target inserted (100 um ) and Cats2 in
Placing Finger on The beam
Vamos IC10 placed in IC12 electronics
Fixede768s Wed Jul 17 03:56:59 2019 OttoRunRUNGeneralLiFRun61
*************************
Run : 61
*************************

Start at 2019-07-17 03:43:55.079886

15N beam -- final beam tunning


Target #1 1.25 mg/cm2

Brho = 0.640 Tm


plastic off
diamond on

mask: +7 mm

beam intensity ~5e7

Stop at 2019-07-17 03:57:48.548671
Stop comment:

ELOG Home Page