| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Fixed | e738 |
Sat Jul 14 20:16:50 2018 |
Daisuke, Shumpei, Valérie | RUN | General | Cryo-LH2 | RUN 392 9C |
9C + liquid H.
RUN 392 start 19h46 stop 21h47
e748 Exxx 3,5G 14 juil. 21:49 /data/e748X/e755/acquisition/run/run_0392.dat.14-07-18_19h45m58s
normal TRIGGERS MUST2 CATS div Plastic div
Brho1 RMN = 1.7311 T.m ID3P1= 305.1A
SLITS FH31 +/- 20 mm F43 V 10 mm; FH43 10 mm I~1.9 ľA
Intensity is fluctuating at the end of run 392 down to I~ 1.7 ľA then 1.6-1.5ľA.
Apparently due to general instabilities related to the decrease of the external air temperature (..). PCP is re-tuning.
Total integral:1.0 10**4 (without 0, all beams)
8B 8.2% (integral = 824 for channels [200;2200])
9C ~ 4.5 % (integral = 454 for channels [2800;4200])
7Be 65.8 % (integral = 6585 for channels [4500;6500])
6Li 21.1% (integral = 2113 for channels [6500;8000])
Beam CATS1 ~ 185kpps; CATS ~ 164 kpps ; Plastic ~ 170 kpps
CATS1 I ~ 0.08 ľA
CATS2 I ~ 0.06 ľA |
| Fixed | e738 |
Sat Jul 14 21:53:48 2018 |
Daisuke, Shumpei, Valérie | RUN | General | Cryo-LH2 | RUN 393 9C |
9C + liquid H.
RUN 393 start 21h48 stop 23h49
e748 Exxx 4,0G 14 juil. 23:49 /data/e748X/e755/acquisition/run/run_0393.dat.14-07-18_21h48m17s
e748 Exxx 382M 15 juil. 00:01 /data/e748X/e755/acquisition/run/run_0393.dat.14-07-18_21h48m17s.1
normal TRIGGERS MUST2 CATS div Plastic div
Brho1 RMN = 1.7311 T.m ID3P1= 305.1A
SLITS FH31 +/- 20 mm F43 V 10 mm; FH43 10 mm I~1.9 ľA
PCP retuned the beam. Intensity is increasing up to 1.8 ľA but fluctuating again down to 1.5 ľA.
Better at 22h10, I ~ 1.88 ľA.
Beam CATS1 ~ 188kpps ; CATS2 ~ 167 kpps ; Plastic ~ 172 kpps
up to CATS1 214 kpps; CATS2 ~ 191 kpps; ; Plastic ~ 198 kpps.
CATS1 I ~ 0.08 ľA to 0.14 ľA
CATS2 I ~ 0.06 ľA to 0.10 ľA |
| Fixed | e748 |
Sat Jul 8 08:39:10 2017 |
Daisuke, Shumpei | OFFLINE | General | CD2 | 12Be(d,t)? |
/home/e748/analysis/nptool/Outputs/Analysis/runtest.root (run_0331_0.root?) was analyzed.
DSSD energy vs theta_lab plot for triton is attatched.
The gates to select triton are also shown.
gate;
target position on target
chio vs Qplastic rough Z=4
DSSD energy vs TOF mass=3 and no signal in CsI
Only MM1 is analized.
We need more statistics, but we can't analyze CsI data maybe because position matching with DSSD? |
| Fixed | e738 |
Thu Jul 12 08:16:21 2018 |
Daisuke, Megumi, Valérie | RUN | General | Cryo-LH2 | RUN 358 |
RUN 358
start: 8h14 stop: 9h48
e748 Exxx 3,3G 12 juil. 09:49 /data/e748X/e755/acquisition/run/run_0358.dat.12-07-18_08h12m26s
12C primary : 1.95 uA
CATS1: 224 kHz ; CATS2: 194 kHz
PL : 199 kHz
CATS1 670 V I ~ 0.16 ľA ; CATS2 650V I ~ 0.12V
Efficiencies estimated from the integrals in the plots IC_dE1_TCATS1HF
cf run358_ICdeTcatsHFtot.png run358_ICdeTcatsHFeff.png
CATS 1: (2.8 10**4)/(3.1 10**4) =0.90 -->90% ; CATS2 (2.7 10**4)/(3.06 10**4)==> 88% |
| Fixed | e738 |
Thu Jul 12 09:52:07 2018 |
Daisuke, Megumi, Valérie | RUN | General | Cryo-LH2 | RUN 359 |
RUN 359
start: 9h48 stop: 11h25
748 Exxx 3,2G 12 juil. 11:25 /data/e748X/e755/acquisition/run/run_0359.dat.12-07-18_09h48m08s
12C primary : 1.98 uA
CATS1: 230 kHz ; CATS2: 198 kHz
PL : 205 kHz
CATS1 670 V I ~ 0.16 ľA ; CATS2 650V I ~ 0.12V |
| Fixed | e738 |
Thu Jul 12 11:28:46 2018 |
Daisuke, Megumi, Valérie | RUN | General | Cryo-LH2 | RUN 360 |
RUN 360
e748 Exxx 3,4G 12 juil. 13:08 /data/e748X/e755/acquisition/run/run_0360.dat.12-07-18_11h24m44s
start: 11h25 stop: 13h08
12C primary : 1.95 uA
CATS1: 230 kHz ; CATS2: 198 kHz
PL : 205 kHz
CATS1 670 V I ~ 0.16 ľA ; CATS2 650V I ~ 0.12V
Stable conditions for beam and CATS during the run.
Series of plots for the raw spectra of CATS1 strips. |
| Fixed | e738 |
Thu Jul 12 13:09:14 2018 |
Daisuke, Megumi, Valérie | RUN | General | Cryo-LH2 | RUN 361 |
RUN 361
e748 Exxx 3,5G 12 juil. 15:01 /data/e748X/e755/acquisition/run/run_0361.dat.12-07-18_13h07m40s
start: 13h08 stop: 14h59
12C primary : 1.8 uA
CATS1: 200 kHz ; CATS2: 175 kHz
Plast : 178 kHz
CATS1 670 V, I ~ 0.14 ľA ; CATS2 650V, I ~ 0.10V sometimes up Ovc to 0.38 ľA but rather stable. |
| Fixed | e755 |
Sun Jun 24 22:18:50 2018 |
Daisuke, Louis, Olivier, Valérie | RUN | General | Cryo-LH2 | RUN 107 |
run 107 start@ 22h15; stop@ 22h37
e748 Exxx 689278077 24 juin 22:37 /data/e748X/e755/acquisition/run/run_0107.dat.24-06-18_22h15m16s |
| Fixed | e755 |
Sun Jun 24 22:26:46 2018 |
Daisuke, Louis, Olivier, Valérie | MUST2 | General | Cryo-LH2 | HV on MUST2, currents, CATS |
NB: SiLi1 T7 has tripped during the evening (since Run 104)
It should be put on again (better to increase the HV during a beam stop) |
| Fixed | e755 |
Tue Jun 26 14:29:36 2018 |
Daisuke, Louis, Olivier, Valérie | RUN | General | Cryo-LH2 | RUN 146 |
Run 146 -- 26th June start@ 14h07 stop @14h26
e748 Exxx 844513015 26 juin 14:26 /data/e748X/e755/acquisition/run/run_0146.dat.26-06-18_14h07m32s
The run was stopped: no beam due to the source disjonction.
Trigger: all MM + CATS DIV
conditions of the MUST2 pedestals as before |
| Fixed | e738 |
Thu Jul 12 15:07:43 2018 |
Daisuke, Louis, Marlčne, Megumi, Valérie | RUN | General | Cryo-LH2 | RUN 362-TRIGGER TESTS |
RUN 362 WITH CHANGE OF TRIGGERS FOR TESTS see below
e748 Exxx 1,7G 12 juil. 16:09 /data/e748X/e755/acquisition/run/run_0362.dat.12-07-18_15h08m50s
start: 15h08 stop: 16h08
12C primary : between 1.7 and 1.9 uA
CATS1: 200 kHz ; CATS2: 175 kHz
Plast : 178 kHz FAG ~ 650/s
CATS1 670 V I ~ 0.14 ľA ; CATS2 650V I ~ 0.10V sometimes up Ovc to 0.38 ľA but rather stable.
The triggers can be seen on Run362_TriggerMMallCats.png
There are: IN10- CATS1div and IN11 -CATS2div, IN16 Plastic %
IN12 and IN14.
NB: the entry IN12 noted "CATS" in the snapshot was MM2all div, with div =10
In Gatconfmaster the value is 2**(12-1) = 2048.
The "IN14" trigger input is:
MM2all*CATS (hardware coincidence between MUST2 and CATS) in IN14
GMT trigger in GATCONFmaster : 2**(14-1) = 2**13 = 8192. |
| Fixed | e738 |
Sat Jul 14 19:38:25 2018 |
Daisuke, Jean-Charles, Shumpei, Valérie | RUN | General | Cryo-LH2 | RUN 391 TUNING 9C |
9C + liquid H.
SLITS FH31 +/- 20 mm F43 V 10 mm; FH43 10 mm I~1.9 ľA
RUN 391 start 19h30 stop 19h43
e748 Exxx 286M 14 juil. 19:45 /data/e748X/e755/acquisition/run/run_0391.dat.14-07-18_19h30m29s
normal TRIGGERS MUST2 CATS div Plastic div
Brho1 RMN = 1.7311 T.m ID3P1=
Total integral: 4.017 10**4 (without 0, all beams)
9C ~ 5 % (integral = 2160 for channels [2800;4200])
7Be 59 % (integral = 2.236 10**4 for channels [4500;6500])
Beam CATS1 ~ 133 kpps; CATS ~ 117 kpps ; Plastic ~ 124 kpps
CATS1 I ~ 0.08 ľA
CATS2 I ~ 0.06 ľA |
| Fixed | e738 |
Sat Jul 14 18:18:33 2018 |
Daisuke, Jean-Charles, Megumi, Nori, Shumpei, Valérie | RUN | General | Cryo-LH2 | RUN 386 TUNING 9C |
9C + liquid H.
SLITS FH31 +/- 2mm then +/-5 mm at the beginning of the run
RUN 386 start 18h16 stop 18h28
e748 Exxx 1,3G 14 juil. 2018 /data/e748X/e755/acquisition/run/run_0386.dat.14-07-18_18h15m43s |
| Fixed | e738 |
Sat Jul 14 18:36:38 2018 |
Daisuke, Jean-Charles, Megumi, Nori, Shumpei, Valérie | RUN | General | Cryo-LH2 | RUN 387 TUNING 9C |
9C + liquid H.
SLITS FH31 +/- 5 mm F43 opened
I ~ 1.6ľA TRIGGERS CATS2, PLASTIC div
RUN 387 |
| Fixed | e738 |
Sat Jul 14 18:37:29 2018 |
Daisuke, Jean-Charles, Megumi, Nori, Shumpei, Valérie | RUN | General | Cryo-LH2 | RUN 388 TUNING 9C |
9C + liquid H.
SLITS FH31 +/- 5 mm F43 opened
I ~ 1.6ľA normal TRIGGERS MUST2 CATS div Plastic div
RUN 388 start 18h3 |
| Fixed | e738 |
Sat Jul 14 18:54:01 2018 |
Daisuke, Jean-Charles, Megumi, Nori, Shumpei, Valérie | RUN | General | Cryo-LH2 | RUN 389 TUNING 9C |
9C + liquid H.
SLITS FH31 +/- 30 mm F43 opened
I ~ 1.6ľA normal TRIGGERS MUST2 CATS div Plastic div
RUN 389 start 18h45 stop 18h55
e748 Exxx 469M 14 juil. 18:57 /data/e748X/e755/acquisition/run/run_0389.dat.14-07-18_18h44m21s |
| Fixed | e738 |
Sat Jul 14 19:01:22 2018 |
Daisuke, Jean-Charles, Megumi, Nori, Shumpei, Valérie | RUN | General | Cryo-LH2 | RUN 390 TUNING 9C |
9C + liquid H.
SLITS FH31 +/- 20 mm F43 V 10 mm; FH43 10 mm I~1.9 ľA
normal TRIGGERS MUST2 CATS div Plastic div
RUN 390 start 18h58 stop 19h27
e748 Exxx 873M 14 juil. 19:29 /data/e748X/e755/acquisition/run/run_0390.dat.14-07-18_18h57m53s
CATS1 I ~ 0.22ľA
CATS2 I~ 0.16 ľA
Brho1 RMN = 1.7283 T.m I_D3P1= 305A
The Brho1 value is there 0.1% smaller than it was during the previous data taking for 9C.
Here the purity of the beams is:
Total integral: 6.22 10**4 (without 0, all beams)
9C 3.5% (integral = 2200 for channels [2800;4200])
7Be 72.2% (integral = 4.488 10**4 for channels [4500;6500])
6Li 15% (integral = 9570 for channels [6500;8000])
|
| Fixed | e738 |
Sat Jul 14 14:01:55 2018 |
Daisuke, Jacques, Shumpei, Valérie | RUN | General | Cryo-LH2 | RUNS 384-385 |
12C + liquid H.
RUN 384 start 13h58 stop 15h54
CATS1/2 110 kHz, 0.12/0.10 micro A Plastic 90 kHz.
e748 Exxx 2,1G 14 juil. 15:54 /data/e748X/e755/acquisition/run/run_0384.dat.14-07-18_13h58m20s
RUN 385 start 15h54 stop 18h05
e748 Exxx 2,5G 14 juil. 2018 /data/e748X/e755/acquisition/run/run_0385.dat.14-07-18_15h53m48s |
| Fixed | e738 |
Fri Jul 13 13:41:48 2018 |
Daisuke, Jacques, Megumi, Olivier, Otsu, Takeshi, Valérie | RUN | General | Cryo-empty | RUNS 371-372 |
Empty target + 9C.
Run 371 start 11h20 stop 13h20
e748 Exxx 2,1G 13 juil. 13:20 /data/e748X/e755/acquisition/run/run_0371.dat.13-07-18_11h20m03s
Run 371 start 13h20 stop
I primary beam ~ 1.8 ľA large fluctuations down to 0.6 ľA
CATS1 ~ 180kpps CATS2 ~ 164 kpps Plastic ~ 154 kpps
CATS1 HV 670V I~0.12 ľA ; CATS2 HV 650V 0.10 ľA |
| Fixed | e738 |
Mon Jul 9 20:28:09 2018 |
Daisuke, Freddy, Louis, Valérie | RUN | General | Cryo-LH2 | RUNS 318 to 320 |
From RUN 318 to RUN 320:
initial problem was that the stop process was not correctly taken into account on Narval. Geco acor was still running.
We killed Narval.
It was impossible to initialize or start run correctly.We did Several kna, kall.
Bugs on the run control server (ps -edf |grep narval or start_acq showed several on-going processes. We removed them). Then the CATS1 crate was not initialized correctly, it remained Offline.
see ProblemDAQcrateCATS1RCAt20h.png ProblemDAQcrateCATS1iolan.png
We rebooted (software mode on Iolan) CATS1 VXI crate, then init..;breakup...init then tried to start but stopped because because we noted merger problems.
See ProblemMergerCATSbranch.png
Then we needed to reinitialize a third time the Narval run control bto recover a correct Run control operation.
Fred S. came to check that we worked well... and that everything was working well. |