| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Fixed | e748 |
Mon Jul 3 18:45:41 2017 |
Valérie L | DAQ | General | N/A | Checking ALL RUNS with Ganil_Tape |
The problems with the runs which could not be converted during the night was due
to a double header buffers of the runs with an odd number.
Now it affects sometimes also runs with even numbers cf 206 below.
The best is, after starting the run to check that the header is correctly read by launching Ganil_Tape on the run.
If Ganil_Tape is not working on this run, the run is corrupted and we should stop it and start a new one.
If the problem persists, then:
-the first solution is to do BREAKUP in the Run Control window; then INIT
- otherwise if the problem persists: we need to do some kill of narval processes: acqmenu --> kna, na.
Note that when the problem occurs, there is a message in the RC window about the storer see below.
??? MAYBE THE PROBLEM IS DUE TO THE NEW CONFIGURATION LOADED ON SUNDAY AFTERNOON WITH MULTI WATCHERS FOR THE RUN CONTROL:
It is the file e748_multiwatch.rcc.xml. Previously we had the e748.rcc.xml with a direct link to the storer actor.
THEN PROBLEMS OCCURRED DURING ThE NIGHT.
--------------------------------------------------------------------------------------------------------------
Commands to check runs:
Ganil_Tape Name_run (see below)
When it works, cf picture of the Ganil Tape window below.
It seems that the data are here, when we check with the following commands:
[e748'@ganp616 run]$ od -Ax -tx -N131072 run_0206.dat.03-07-17_17h49m42s
[e748'@ganp616 run]$ od -Ax -tx run_0206.dat.03-07-17_17h49m42s
..
06de30 535f334d 5f585254 2c333445 30373231
06de40 0d35312c 5f334d4d 58525453 3334545f
06de50 3732312c 35312c31 334d4d0d 5254535f
06de60 34545f58 32312c33 312c3137 4d4d0d35
========================================================================================
cd /data/e748X/e748/acquisition/run
[e748'@ganp616 run]$ Ganil_Tape run_0206.dat.03-07-17_17h49m42s
Ganil_Tape 16.09.03
--> Info : Buffer size change from 65536 to 0
Request to rewind ......
Rewind OK ...
--> Error : 8018c82 Impossible to set buffer size
--> Info : New device Name : run_0206.dat.03-07-17_17h49m42s fType :File
--> Info : Histogram data base created
*** Break *** floating point exception
===========================================================
There was a crash.
This is the entire stack trace of all threads:
===========================================================
#0 0x0000003e046ac8ce in waitpid () from /lib64/libc.so.6
#1 0x0000003e0463e909 in do_system () from /lib64/libc.so.6
#2 0x00007fa29d5f9988 in TUnixSystem::StackTrace() () from /home/global/root/root_C6/lib/libCore.so
#3 0x00007fa29d5f8803 in TUnixSystem::DispatchSignals(ESignals) () from /home/global/root/root_C6/lib/libCore.so
#4 <signal handler called>
#5 0x00000000005373e7 in GTape::GetPos (this=0x2114640, position=0x21141d0) at sources/GTape.C:2092
#6 0x000000000045ee3d in GTControlDevice::DisplayPosition (this=0x2114100) at GTape/GTControlDevice.C:425
#7 0x000000000045e9e3 in GTControlDevice::SetNameDevice (this=0x2114100, filename=<value optimized out>) at GTape/GTControlDevice.C:513
#8 0x0000000000461b32 in GTControlDevice::GTControlDevice (this=0x2114100, p=<value optimized out>, devicename=0x2113750 "run_0206.dat.03-07-17_17h49m42s", consol=<value optimized out>, origin=176) at GTape/GTControlDevice.C:313
#9 0x00000000004650e0 in GTMainFrame::GTMainFrame (this=0x7fff7f7c2f80, p=<value optimized out>, w=<value optimized out>, h=<value optimized out>, o=<value optimized out>, name=<incomplete type>) at GTape/GTMainFrame.C:98
#10 0x000000000045dc0b in main (argc=1, argv=<value optimized out>) at GTape/GT.C:14
===========================================================
The lines below might hint at the cause of the crash.
If they do not help you then please submit a bug report at
http://root.cern.ch/bugs. Please post the ENTIRE stack trace
from above as an attachment in addition to anything else
that might help us fixing this issue.
===========================================================
#5 0x00000000005373e7 in GTape::GetPos (this=0x2114640, position=0x21141d0) at sources/GTape.C:2092
#6 0x000000000045ee3d in GTControlDevice::DisplayPosition (this=0x2114100) at GTape/GTControlDevice.C:425
#7 0x000000000045e9e3 in GTControlDevice::SetNameDevice (this=0x2114100, filename=<value optimized out>) at GTape/GTControlDevice.C:513
#8 0x0000000000461b32 in GTControlDevice::GTControlDevice (this=0x2114100, p=<value optimized out>, devicename=0x2113750 "run_0206.dat.03-07-17_17h49m42s", consol=<value optimized out>, origin=176) at GTape/GTControlDevice.C:313
#9 0x00000000004650e0 in GTMainFrame::GTMainFrame (this=0x7fff7f7c2f80, p=<value optimized out>, w=<value optimized out>, h=<value optimized out>, o=<value optimized out>, name=<incomplete type>) at GTape/GTMainFrame.C:98
#10 0x000000000045dc0b in main (argc=1, argv=<value optimized out>) at GTape/GT.C:14
=========================================================== |
| Attachment 1: GanilTapeRun207.png
|
|
| Attachment 2: MessageRunControlNArval.png
|
|
| Attachment 3: RunControlOnNarvalAllWatcher.png
|
|
| Fixed | e748 |
Mon Jul 3 19:59:02 2017 |
Valérie L | RUN | General | CD2 | Series of runs - afternoon/evening 3rd July |
Series of runs during the afternoon with the tuning of the ChIo and the tuning of the line
-------------------------------------------------------------------------------------------------------
Run 194 run ok (Ganil_Tape checking)
-r--r--r-- 1 e748 Exxx 86966272 3 juil. 14:01 run_0194.dat.03-07-17_12h28m02s
-------------------------------------------------------------------------------------------------------
Run 200 run ok (Ganil_Tape checking)
-r--r--r-- 1 e748 Exxx 1376256 3 juil. 15:47 run_0200.dat.03-07-17_15h44m40s
-------------------------------------------------------------------------------------------------------
Run 201 run ok (Ganil_Tape checking)
-r--r--r-- 1 e748 Exxx 1376256 3 juil. 15:57 run_0201.dat.03-07-17_15h53m42s
-------------------------------------------------------------------------------------------------------
Run 203 run ok (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 421986304 3 juil. 16:26 run_0203.dat.03-07-17_15h57m29s
-------------------------------------------------------------------------------------------------------
Run 204 run ok (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 595066880 3 juil. 16:54 run_0204.dat.03-07-17_16h26m00s
-------------------------------------------------------------------------------------------------------
Run 206 run with junk header (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 161349632 3 juil. 17:53 run_0206.dat.03-07-17_17h49m42s
-------------------------------------------------------------------------------------------------------
Run 207 run ok (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 15859712 3 juil. 18:02 run_0207.dat.03-07-17_18h00m50s
-------------------------------------------------------------------------------------------------------
Run 208 run ok (Ganil_Tape checking)
-r--r--r-- 1 e748 Exxx 69599232 3 juil. 18:14 run_0208.dat.03-07-17_18h11m02s
-------------------------------------------------------------------------------------------------------
Run 209 run ok (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 110952448 3 juil. 18:19 run_0209.dat.03-07-17_18h14m53s
-------------------------------------------------------------------------------------------------------
Run 210 run ok (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 809107456 3 juil. 18:57 run_0210.dat.03-07-17_18h24m43s
-------------------------------------------------------------------------------------------------------
Run 211 run with junk header (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 1703936 3 juil. 18:58 run_0211.dat.03-07-17_18h57m44s
-------------------------------------------------------------------------------------------------------
Run 212 run ok (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 1179648 3 juil. 19:02 run_0212.dat.03-07-17_18h59m37s
-------------------------------------------------------------------------------------------------------
Run 213 run with junk header (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 2228224 3 juil. 19:09 run_0213.dat.03-07-17_19h07m00s
-------------------------------------------------------------------------------------------------------
Run 214 run ok (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 2097152 3 juil. 19:16 run_0214.dat.03-07-17_19h09m49s
-------------------------------------------------------------------------------------------------------
Run 215 run with junk header (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 1703936 3 juil. 19:18 run_0215.dat.03-07-17_19h16m51s
-------------------------------------------------------------------------------------------------------
Run 216 run ok (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 2555904 3 juil. 19:26 run_0216.dat.03-07-17_19h18m45s
-------------------------------------------------------------------------------------------------------
BREAKUP then INIT was done before the start of this run 217
-rw-r--r-- 1 e748 Exxx 3997696 3 juil. 19:47 run_0217.dat.03-07-17_19h39m51s
During this run the production target was rotated from 39deg to 31.9 deg
Trigger= Plastic DIV ; Div =100; GMT IN11 (GATCONF 1024)
-------------------------------------------------------------------------------------------------------
Run 218 run ok (Ganil_Tape checking) start 19h59 Stop 20h08
rw-r--r-- 1 e748 Exxx 32768000 3 juil. 20:08 run_0218.dat.03-07-17_19h59m59s
Trigger LISE IN13 GMT
-------------------------------------------------------------------------------------------------------
Run 219 run ok (Ganil_Tape checking) start 20h08 Stop 20h11
-rw-r--r-- 1 e748 Exxx 11993088 3 juil. 20:11 run_0219.dat.03-07-17_20h08m32s
Trigger LISE D6 IN13 GMT
-------------------------------------------------------------------------------------------------------
Run 220 run with junk header (Ganil_Tape checking)
-rw-r--r-- 1 e748 Exxx 46530560 3 juil. 20:20 run_0220.dat.03-07-17_20h15m39s
-------------------------------------------------------------------------------------------------------
BREAKUP then INIT was done before the start of this run 221
rw-r--r-- 1 e748 Exxx 393216 3 juil. 20:24 run_0221.dat.03-07-17_20h24m40s
------------------------------------------------------------------------------------------------------- |
| Fixed | e748 |
Mon Jul 3 20:29:56 2017 |
Valérie L | RUN | General | CD2 | Data runs after LISE tuning |
The beam was tuned by the LISE team.
Beam conditions during the run 222 were changed to increase the beam at 1µA.
Beam rate on CATS: 9000/s; Plastic 24000/s FAG ~300/s.
Triggers CATS1 div. Plastic div |
| Attachment 1: ScalersRun222trigPlastCATS1.png
|
|
| Fixed | e748 |
Mon Jul 3 21:41:57 2017 |
Valérie L | RUN | General | CD2 | Runs 225-227 |
---------------------------------------------------------------------------------
3 µA at 21h25 ; CAVIAR D6 28000/s
CATS 20000/s
DIV = 100 (CATS1, CAT2, PLAST)
TRIGGERS MM1, MM8
RUN 225 3 JULY start 21h29 STOP at 2&h51 due to problem of DAD blocking of DAQ.FAG at 0
(start ok checked with Ganil-Tape)
-r--r--r-- 1 e748 Exxx 7143424 3 juil. 21:51 run_0225.dat.03-07-17_21h29m23s
RUN 226 227 JUNK
---------------------------------------------------------------------------------
Run 224 JUNK buffer header (stop due to problem -->checked with Ganil Tape)
rw-r--r-- 1 e748 Exxx 1835008 3 juil. 21:26 run_0224.dat.03-07-17_21h24m55s
--------------------------------------------------------------------------------- |
| Attachment 1: Run225l3julyScalerAnalyzer3µA.png
|
|
| Fixed | |
Mon Jul 3 22:10:28 2017 |
Valérie L | CATS | Hardware | CD2 | VXI CATS crate problem solved |
We had problems with CATS VME/VXI crate.
It was idle and it was not possible to restart it by breakup and init.
We enter in the room to reset the ganlx7 of CATS.
After the crate was correct and we could do INIT and start.
The visu in the CATS terminal was ok. |
| Attachment 1: VisuCATproblemTerm.png
|
|
| Attachment 2: VXICATSreset.png
|
|
| Fixed | e748 |
Mon Jul 3 22:24:05 2017 |
Valérie L | RUN | General | CD2 | Run series of problems 3rd July |
The daq was unstable with several problems of the merge from LISE.
We did tk kna (kill narval process) and na.
but the next run was starting still unstable with Error from the merge
It qeems that the counting rate is too high due to low division on the triggers.
For the moment CATS div is 100, we will put 300.
plast div is 100.
We will put it at 1000 for the next runs.
Enter in the room to change division.
r--r--r-- 1 e748 Exxx 7143424 3 juil. 21:51 run_0225.dat.03-07-17_21h29m23s
-r--r--r-- 1 e748 Exxx 720896 3 juil. 21:55 run_0226.dat.03-07-17_21h54m51s STOP DUE TO CATS VXI problems
-rw-r--r-- 1 e748 Exxx 786432 3 juil. 21:56 run_0227.dat.03-07-17_21h55m56s STOP DUE TO DAQ blocking /MERGE message LIE
-r--r--r-- 1 e748 Exxx 57016320 3 juil. 22:16 run_0228.dat.03-07-17_22h12m59s STOP DUE TO MERGE message LISE
-r--r--r-- 1 e748 Exxx 52232192 3 juil. 22:22 run_0229.dat.03-07-17_22h19m12s |
| Fixed | e748 |
Mon Jul 3 23:06:24 2017 |
Valérie L | RUN | General | CD2 | Problem during Run 230-231 with CATS |
r-- 1 e748 Exxx 34013184 3 juil. 22:52 run_0230.dat.03-07-17_22h46m03s
-rw-r--r-- 1 e748 Exxx 97910784 3 juil. 23:09 run_0231.dat.03-07-17_22h54m42s |
| Attachment 1: ResetEventCounterAfterRun230Centrum.png
|
|
| Attachment 2: PRoblemRun230.png
|
|
| Attachment 3: ScalersRUn230.png
|
|
| Fixed | e748 |
Mon Jul 3 23:16:33 2017 |
Valérie L | DAQ | General | CD2 | Change of TAC RANGES (from run 230) |
TAC range changed after run 229.
NB: Change applied for Runs 230 and 231
BUT these runs are not working due to problems of Merger
(CATS not sending events in the branch of the DAQ).
The range was changed for all the TAC previously with 1µs, now put to 500ns
CATS1_FAG CAVIAR (del 550ns) 500ns T_CATS1_CAV ADC VXI MUST2 add=19
CATS1_FAG CATS2_FAG (del 33ns) 200ns T_CATS1_2 ADC VXI MUST2 add=28
OU_MUVI CATS1_FAG 500ns T_MUVI_CATS1 ADC VXI MUST2 add=21
CATS2_FAG PLAST (val) 500ns T_PL_CATS2 ADC VXI MUST2 add=22
CATS1_FAG PLAST (no val) 500ns T_PL_CATS1 ADC VXI MUST2 add=23
-------------------------------------------------------------------------------------------
CATS1_FAG PLAST (no val) 500ns T_PLch_CATS1 ADC VXI CHIO add=19
this TAC was changed, with Plastic with no validation by FAG; Range was 2µs before, now 5 µs
start:PLAST ChIo CHIO (no val) 5µs T_PL_CHIO ADC VXI CHIO add=3
-------------------------------------------------------------------------------------------
TAC EXL HF 100ns EXL_HF ADC VXI MUST2 add=18 |
| Fixed | |
Tue Jul 4 00:53:18 2017 |
Valérie L | RUN | General | CD2 | Runs with merge and time out problems |
-r--r--r-- 1 e748 Exxx 720896 3 juil. 21:55 run_0226.dat.03-07-17_21h54m51s
-rw-r--r-- 1 e748 Exxx 786432 3 juil. 21:56 run_0227.dat.03-07-17_21h55m56s
-r--r--r-- 1 e748 Exxx 57016320 3 juil. 22:16 run_0228.dat.03-07-17_22h12m59s
-r--r--r-- 1 e748 Exxx 52232192 3 juil. 22:22 run_0229.dat.03-07-17_22h19m12s
-rw-r--r-- 1 e748 Exxx 34013184 3 juil. 22:52 run_0230.dat.03-07-17_22h46m03s
-r--r--r-- 1 e748 Exxx 241238016 3 juil. 23:37 run_0231.dat.03-07-17_22h54m42s |
| Fixed | |
Tue Jul 4 00:54:41 2017 |
Valérie L | RUN | General | CD2 | Runs after reset of VXI |
VXI CHIO was offline --> reset of ganlx9 (entering in D6) on the VXI crate
-r--r--r-- 1 e748 Exxx 34013184 4 juil. 00:14 run_0232.dat.04-07-17_00h10m44s
-rw-r--r-- 1 e748 Exxx 5177344 4 juil. 00:17 run_0233.dat.04-07-17_00h16m00s
-rw-r--r-- 1 e748 Exxx 2162688 4 juil. 00:26 run_0234.dat.04-07-17_00h19m48s
-rw-r--r-- 1 e748 Exxx 2097152 4 juil. 00:30 run_0235.dat.04-07-17_00h28m10s
-------------------------------------------------------------------------------------------------
-rw-r--r-- 1 e748 Exxx 80609280 4 juil. 00:41 run_0236.dat.04-07-17_00h30m48s
-------------------------------------------------------------------------------------------------
-rw-r--r-- 1 e748 Exxx 111411200 4 juil. 00:46 run_0237.dat.04-07-17_00h41m02s BEAM ON
All triggers MM1 to MM8, CATS1 div = 300, CATS2 div = 300, PLAST = 1000
-------------------------------------------------------------------------------------------------
same conditions for run 238
-rw-r--r-- 1 e748 Exxx 120061952 4 juil. 00:58 run_0238.dat.04-07-17_00h47m14s
end of run 238
Level : ERROR
Date : 04/07/2017 00:48:05
Logger : vme
Remote Info : localhost:60507
- - - - - - - - - -
Message :
VXCAMEXE on ganlx1 : - TGV Watch Dog - 25 errors |
| Fixed | e748 |
Tue Jul 4 01:00:26 2017 |
Valérie L | RUN | General | CD2 | Run 239 test with trigger MUST2 |
Started run #239 4JULY start 00h59 stop 1h15
PROBLEM junk header checked with Ganil Tape
triggers only MUST2 IN1 to IN8
rw-r--r-- 1 e748 Exxx 55181312 4 juil. 01:15 run_0239.dat.04-07-17_00h59m21s
triggers only MUST2 IN1 to IN8 |
| Fixed | e748 |
Tue Jul 4 01:17:35 2017 |
Valérie L | RUN | General | CD2 | Run 240 |
Run #240 4JULY start 1h17
(run ok checked with Ganil_Tape)
All triggers MUST2 IN1 to IN8,
IN9 CATS1, IN10 CATS2 div = 300; IN11 PLASTIC |
| Fixed | e748 |
Wed Jul 5 00:29:06 2017 |
Valérie L | RUN | General | CD2 | Summary of the evening runs 322(e748chio)-323 (e748) |
============================================================================================================
[e748'@ganp616 run]$ cd /data/e748chioX/e748chio/acquisition/run
-r--r--r-- 1 e748chio Exxx 4194288609 4 juil. 20:33 run_0322.dat.04-07-17_19h26m13s
-r--r--r-- 1 e748chio Exxx 4194286843 4 juil. 21:42 run_0322.dat.04-07-17_19h26m13s.1
-r--r--r-- 1 e748chio Exxx 4194285561 4 juil. 22:51 run_0322.dat.04-07-17_19h26m13s.2
-r--r--r-- 1 e748chio Exxx 4194277237 5 juil. 00:05 run_0322.dat.04-07-17_19h26m13s.3
-rw-r--r-- 1 e748chio Exxx 1432559849 5 juil. 00:30 run_0322.dat.04-07-17_19h26m13s.4
============================================================================================================
/data/e748X/e748/acquisition/run
-r--r--r-- 1 e748 Exxx 1000M 4 juil. 22:52 run_0323.dat.04-07-17_19h25m59s
-rw-r--r-- 1 e748 Exxx 405M 5 juil. 00:23 run_0323.dat.04-07-17_19h25m59s.1
============================================================================================================
Quality Control:
- Written by Beatriz and Valérie
- Checked by Nicolas & Serge
- Agreed upon by Franck and Anne
- Corrected by Freddy
- Approved by Adrien
============================================================================================================ |
| Attachment 1: RunControlChIoRun322.png
|
|
| Attachment 2: RunControlRun323.png
|
|
| Fixed | e748 |
Wed Jul 5 00:40:36 2017 |
Valérie L | RUN | General | CD2 | Overview of the evening config 322(e748chio)-323 (e748) |
BEAM conditions
CAVIAR LISE 35k
GMT TRiggers:
All MUST2 (IN1, ...IN7, IN15) + IN9 : Cats1div, IN2:Cats2div
Division = 3000
------------------------------------------------------------------------------- |
| Attachment 1: ScalersRun323e748at0h48.png
|
|
| Attachment 2: ConfigCEntrumE748.png
|
|
| Attachment 3: PulserChIoForScalerDAQ.png
|
|
| Fixed | e748 |
Wed Jul 5 00:58:43 2017 |
Valérie L | RUN | General | CD2 | Overview of the evening plots Run323-e748 (Run 322 chio) |
Run 323 DAQ E748; Run 322 DAQ CHIO see plots below.
Run 323
/data/e748X/e748/acquisition/run
run 323 start at 19h25 stop 22h52
run 323_1 start at 22h52 stop 2h22
run 323_2 start at 2h22
r--r--r-- 1 e748 Exxx 1000M 4 juil. 22:52 run_0323.dat.04-07-17_19h25m59s
-r--r--r-- 1 e748 Exxx 1000M 5 juil. 02:22 run_0323.dat.04-07-17_19h25m59s.1
-rw-r--r-- 1 e748 Exxx 320M 5 juil. 03:29 run_0323.dat.04-07-17_19h25m59s.2
-----------------------------------------------------------------------
CHIO
/data/e748chioX/e748chio/acquisition/run
run_0322 start 19h26 stop 20h33
run_0322...1 start 20h33 stop 21h42
run_0322...2 start 21h42 stop 22h51
run_0322...3 start 22h51 stop 00:05
run_0322...4 start 00:05 stop
-r--r--r-- 1 e748chio Exxx 4,0G 4 juil. 20:33 run_0322.dat.04-07-17_19h26m13s
-r--r--r-- 1 e748chio Exxx 4,0G 4 juil. 21:42 run_0322.dat.04-07-17_19h26m13s.1
-r--r--r-- 1 e748chio Exxx 4,0G 4 juil. 22:51 run_0322.dat.04-07-17_19h26m13s.2
-r--r--r-- 1 e748chio Exxx 4,0G 5 juil. 00:05 run_0322.dat.04-07-17_19h26m13s.3
-r--r--r-- 1 e748chio Exxx 4,0G 5 juil. 01:15 run_0322.dat.04-07-17_19h26m13s.4
-r--r--r-- 1 e748chio Exxx 4,0G 5 juil. 02:20 run_0322.dat.04-07-17_19h26m13s.5
-rw-r--r-- 1 e748chio Exxx 36M 5 juil. 02:20 run_0322.dat.04-07-17_19h26m13s.6
==============================================================
============================================================== |
| Attachment 1: Run323TargetPosAt1h20.png
|
|
| Attachment 2: Run323At1h20ChioDigETnumexoOk.png
|
|
| Attachment 3: Run323at1h18Tcats1CAVpureBeam12Be.png
|
|
| Attachment 4: ScalerRun323AT2h19.png
|
|
| Attachment 5: Run323Must2ImpactAt1h50.png
|
|
| Attachment 6: Run323MMstrEXCalAt2h00.png
|
|
| Attachment 7: Run323mmstripsYEat2h.png
|
|
| Attachment 8: ScalerRun323AT2h19.png
|
|
| Attachment 9: Run323At2h45GatconfAllMMCats.png
|
|
| Attachment 10: Run323GatconfZoomUpto800.png
|
|
| Attachment 11: Run323Must2ETOFt1toT4At3h05.png
|
|
| Attachment 12: Run323ZoomETOFMust2T1toT4.png
|
|
| Attachment 13: Run323Must2ETOFT5toT8.png
|
|
| Attachment 14: Run323RawExTORawT5toT8.png
|
|
| Attachment 15: Run323RawTOFtel1toT4At3h20.png
|
|
| Attachment 16: Run323RawEstripYTOFTel1toT4.png
|
|
| Attachment 17: Run323RawEstrYTofTel5toTel8.png
|
|
| Attachment 18: Run323AT3h30CatsPositions.png
|
|
| Attachment 19: Run323At3h30CatsTrajectories.png
|
|
| Fixed | e748 |
Wed Jul 5 03:35:53 2017 |
Valérie L | RUN | General | CD2 | SiLi 1/T5 trip |
AT 3h30 we saw that the SiLi1 of T5 has tripped during the run run_0323.dat.04-07-17_19h25m59s.2 (run started at 2h22)
We put it On again. HV 400V I~ 6.5 µA |
| Fixed | e748 |
Wed Jul 5 04:55:06 2017 |
Valérie L | RUN | General | CD2 | Scalers and summary of Run 323 at 4h55-7h30 |
E748 Runs (around 3h30 for 1Go)
Run 323_2 started at 2h22 stop 5h56
r--r--r-- 1 e748 Exxx 1000M 5 juil. 05:56 run_0323.dat.04-07-17_19h25m59s.2
Run 323_3 started at 5h56 stop a
rw-r--r-- 1 e748 Exxx 400M 5 juil. 07:23 run_0323.dat.04-07-17_19h25m59s.3
--------------------------------------------------------------------------------------------
CHIO runs (around 1h10 for 4Go)
run 322_6 started at 2h20 stop at 3h30
-r--r--r-- 1 e748chio Exxx 4,0G 5 juil. 03:30 run_0322.dat.04-07-17_19h26m13s.6
run322_7 started at 3h30 stop at 4h41
-r--r--r-- 1 e748chio Exxx 4,0G 5 juil. 04:41 run_0322.dat.04-07-17_19h26m13s.7
run322_8 started at 4h41 stop at 05:52
-r--r--r-- 1 e748chio Exxx 4,0G 5 juil. 05:52 run_0322.dat.04-07-17_19h26m13s.8
run322_9 started at 5h52 stop at
-r--r--r-- 1 e748chio Exxx 4,0G 5 juil. 07:03 run_0322.dat.04-07-17_19h26m13s.9
-----------------------------------------------------------------------------------------
Reaction target CD2 position 3, 2.5 mg/cm2 same as before.
5h. The LISE rotating production target is ok ( 2257 tr/min)
All MUST2 HV ok but we should check the current of SiLi1/T5, it has increased.
5 July at 5h00:
SiLi1/T5 400V I ~ 24 µA || SiLi2/T5 700V I ~ 1.8 µA
SiLi1/T8 700V I ~ 2.9 µA || SiLi2/T5 650V I ~ 4.8 µA
---------------------------------------------
Dead time checked with the pulser on scalers: between 1 and 3%. |
| Attachment 1: ScalersRun323AT4h54.png
|
|
| Attachment 2: RunControlBuffer5julyAt6h.png
|
|
| Fixed | e748 |
Wed Jul 5 08:10:03 2017 |
Valérie L | RUN | General | CD2 | Run 325 DAQ 748- run 325 DAQ ChIo |
We stopped the run 323 (DAQ E748) and run 322 (ChIo) when the beam was stopped by the machine during 10 minutes to check the beam intensity.
The run numbers for DAQ E748 and DAQ ChIo were realigned to 325 for both.
Run 325 (DAQ 748) start at 8h07 stop 9h00 (checked by Ganil_Tape -->ok)
Run 325 (DAQ 748chio) start at 8h06 stop 9h01
During the run 325 we see problems with preamplis of IC, no buffer transmitted after 8h40 on NUMEXO branch.
we stop the run.
-----------------------------------------------------------------------------------------------
NB : no run 324 for DAQ E748.
-r--r--r-- 1 e748 Exxx 1000M 5 juil. 02:22 run_0323.dat.04-07-17_19h25m59s.1
-r--r--r-- 1 e748 Exxx 1000M 5 juil. 05:56 run_0323.dat.04-07-17_19h25m59s.2
-r--r--r-- 1 e748 Exxx 590M 5 juil. 08:04 run_0323.dat.04-07-17_19h25m59s.3
r--r--r-- 1 e748 Exxx 237M 5 juil. 09:00 run_0325.dat.05-07-17_08h07m03s
-----------------------------------------------------------------------------------------------
NB: DAQ Chio no run 323, 324.
-r--r--r-- 1 e748chio Exxx 1,4G 5 juil. 09:01 run_0325.dat.05-07-17_08h06m46s
----------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------- |
| Attachment 1: Run325DAQE748daqChIo.png
|
|
| Attachment 2: Run325ChioDigET.png
|
|
| Attachment 3: ScalerAnalyserRun325at8h30.png
|
|
| Attachment 4: GMTtriggerAllRun325.png
|
|
| Fixed | e748 |
Wed Jul 5 09:22:16 2017 |
Valérie L | RUN | General | CD2 | Run 326DAQ- Run 326Chio |
Run 325 start at 9h19
We are running again after some change -switching on- of the power supply of the ChIo cathode).
End of run problem with the Caviar VME CPU seen offline.
DAQ e748 start 9h19 stop 9h46
-rw-r--r-- 1 e748 Exxx 127M 5 juil. 09:46 run_0326.dat.05-07-17_09h19m35s
e748 CHIO
-r--r--r-- 1 e748chio Exxx 1,6G 5 juil. 09:46 run_0326.dat.05-07-17_09h19m21s
^
/ ! \ cathode voltage set to -2900V instead of -3000V : drift velocity almost unchanged
------- |
| Attachment 1: Run326controlBuffer.png
|
|
| Attachment 2: ScalerAnalyzerRun326.png
|
|
| Attachment 3: ProblemCaviarEndOfRun326.png
|
|
| Fixed | e748 |
Wed Jul 5 10:54:09 2017 |
Valérie L | RUN | General | CD2 | SiLi 1/T5 trip |
AT 10h50 we saw that the SiLi1 of T5 has tripped during the run run_0328.dat. (run started at 10h15 )
We put it On again. HV 400V I~ 10 µA increasing to 24-25µA |