| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Pinned | e744 |
Mon May 21 11:26:55 2018 |
iulian cristina | OTHER | Hardware | N/A | error stop run/ run still going |
| After stopping run 347, the narval looks like everything was stopped (blue ready), but I still had FAGs, VALs, and the leds on the GMT were blinking. MUVI was in ready state (leds green - red). |
| Fixed | e744 |
Mon May 21 11:42:16 2018 |
iulian cristina | MUST2 | Software | N/A | run 348 test comunication with Must. Pulser T1 channel 11 |
|
| Fixed | e744 |
Tue May 22 10:44:30 2018 |
iulian Fairouz Valerie | MUST2 | Software | N/A | Run #353 Calimero T1-T4 strips X |
Started run #353
Calimero T1-T4 strips X
Time Calibrator 320 ns ; period 20 ns |
| Fixed | e744 |
Tue May 22 11:37:50 2018 |
Valérie | MUST2 | Software | N/A | calimero config GECO |
Calimero T1-T4 strips X
Time Calibrator 640 ns ; period 20 ns |
| Fixed | e744 |
Tue May 22 11:59:06 2018 |
Valérie | MUST2 | Software | N/A | Calimero config GECO |
|
| Fixed | e744 |
Tue May 22 12:09:27 2018 |
iulian Fairouz Valerie | MUST2 | Software | N/A | Run #354 Calimero T1-T4 strips X |
Started run #353
Calimero T1-T4 strips X
Time Calibrator 640 ns ; period 20 ns |
| Fixed | e744 |
Tue May 22 12:10:27 2018 |
iulian Fairouz Valerie | MUST2 | Software | N/A | Run #355 Calimero T1-T4 strips Y |
Started run #353
Calimero T1-T4 strips Y
Time Calibrator 640 ns ; period 20 ns |
| Fixed | e744 |
Tue May 22 13:40:03 2018 |
Fairouz Valerie | MUST2 | Software | N/A | Run #356 Calimero T1-T4 strips Y |
Run #356
Time Calibrator Calimero stripYT T1to T4 640ns period 20ns |
| Pinned | e744 |
Tue May 22 18:33:32 2018 |
Nicolas, Adrien | OTHER | Software | | How to run Online and Convert raw data files |
1. How to run Basic_online or Online code
- From any computer (logged as e748 user), type 'online'. This logs you to the lpcgrit server and the online directory
- From the command line, run 'start_online' to start the Online code
From the command line, run 'start_basic_online' to start the Basic_online code
2. How to convert raw data files
- From any computer (logged as e748 user), type 'conversion'. This logs you to the lpcgrit server and the conversion directory
Now, two options are possible (first one is preferred)
- From the command line, run './run_convert.sh run_number'
This converts the raw data files which have not been converted yet since run_number
- From the command line, run './Convert run/run_file_to_convert rootdir/converted_run_name.root
This converts runs one by one
|
| Fixed | e744 |
Tue May 22 19:36:50 2018 |
Fairouz, Valérie | MUST2 | Software | N/A | Run #359 Calimero T1-T4 strips X |
Run #359
amplitude of the gene is now set to 10 MeV
Time Calibrator Calimero stripsX T1to T4 640ns period 20ns |
| Pending | e744 |
Tue May 22 19:40:26 2018 |
Francois | BEAM | General | | Planning of the experiment |
|
| Fixed | e744 |
Tue May 22 19:40:48 2018 |
Valérie | MUST2 | General | N/A | snapshots for steps in Calimero calibration |
|
| Fixed | e744 |
Tue May 22 20:06:15 2018 |
Fairouz, Valerie, edited by Iulian Megumi | MUST2 | Software | N/A | Run #360 Calimero T1-T4 strips Y |
Started run #360
calimero stripsYT T1 to T4 640 ns; period 20 ns
amplitude pulser 10 MeV
There was a problem on T2 as the channel 2 on GMT MASTER was set on TTL. |
| Fixed | e744 |
Tue May 22 21:43:31 2018 |
iulian & megumi | MUST2 | Software | N/A | run 361 |
run 361
start 20h38
stop 21h41 |
| Fixed | e744 |
Tue May 22 21:57:51 2018 |
iulian & megumi | MUST2 | Software | N/A | Run #362 Calimero T1-T4 strips X again with solution |
Changed the Thresholds on T4. No longer double peaks...
I guess there is some noise on the T4 and he triggers on the noise from time to time => double peaks
Also T1-T3 have have strip 16 near pidestal who is counting a lot (red) |
| Fixed | e744 |
Tue May 22 22:33:09 2018 |
e744 | MUST2 | Software | N/A | Run #363 Calimero T1-T4 strips X again with threshold at 50% (same as 40%) |
Run #363
NB: Thresholds are the ones on the pulser amplitude to inject the signal (Calimero Pulser interface on Geco). see snapshots on the Calimero summary.
Calimero with 50% thresholds on T4. Same spectra as with the thresholds @40%. I think T4 is triggering on cross-talk, so when the thresholds it's high it's ok. |
| Fixed | e744 |
Tue May 22 22:50:47 2018 |
e744 | MUST2 | Software | N/A | Run #365 Calimero strips Y T1-T4 100% Threshold |
Run #365
Calimero strips Y T1-T4
100% threshold on T4
Something is wrong with the masking?! |
| Pinned | e744 |
Tue May 22 23:42:02 2018 |
iulian & megumi | EXL-PPT | Software | N/A | Run #366 NARVAL FATAL ERROR |
RUN #366
EXL PPT triggers
Falat error from NARAVL
after the error, there is also following message,
____________
Level : WARN
Date : 23/05/2018 00:11:04
Logger : log from NARVAL.storer
Remote Info : localhost:41058
- - - - - - - - - -
Message :
Basic_Storer.Update_Files_Status : File name /data/e748X/e744/acquisition/run/run_0368.dat.22-05-18_23h46m25s already used.
____________
we change the run number to 400, and restart taking data
RUN #400
EXL PPT trigger
for chacking coincidence |
| Fixed | e744 |
Wed May 23 00:30:34 2018 |
e744 | EXL-PPT | General | N/A | RUN #402, EXL PPT trigger |
RUN #402
start exl ppt run for checking coincidence
exl ch 17 put in to adc2 ch 32 |
| Fixed | e744 |
Wed May 23 10:52:28 2018 |
Valérie | EXL-PPT | General | N/A | RUN #405, EXL PPT trigger |
RUN #405
start exl ppt run for checking coincidence
|