MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 76 of 132  Not logged in MUGAST
Status ExpNbr Date Author Type Categorydown Target-Source Subject
Fixede744s Fri Apr 12 21:43:16 2019 OttoRunRUNGeneralCH2Run114
*************************
Run : 114
*************************

Start at 2019-04-12 21:42:12.558669

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos %100
  • No target
  • Beam: 14O
  • Intensity: variable
  • Brho = 0.6912 Tm
  • CATS2 in

Comment:

VAMOS is Open

Stop at 2019-04-12 22:04:01.062421
Stop comment: test run
Fixede744s Fri Apr 12 22:00:42 2019 DiegoTARGETGeneral very different target thickness
Fixede744s Fri Apr 12 22:16:33 2019 OttoRunRUNGeneralCH2Run115
*************************
Run : 115
*************************

Start at 2019-04-12 22:15:31.632167

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos %100
  • Target #3
  • Beam: 14O
  • Intensity: variable
  • Brho = 0.5473 Tm
  • CATS2 in

Comment:

VAMOS is Open

Stop at 2019-04-12 22:25:11.807535
Stop comment: Stopin to change Brho
Fixede744s Fri Apr 12 22:28:15 2019 OttoRunRUNGeneralCH2Run116
*************************
Run : 116
*************************

Start at 2019-04-12 22:27:56.420427

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos %100
  • Target #3
  • Beam: 14O
  • Intensity: variable
  • Brho = 0.5199 Tm
  • CATS2 in

Comment:

VAMOS is Open

Stop at 2019-04-12 22:32:41.994133
Stop comment:
Fixede744s Fri Apr 12 22:33:22 2019 OttoRunRUNGeneralCH2Run117
*************************
Run : 117
*************************

Start at 2019-04-12 22:32:45.436663

Run Conditions:
  • Operator: Antoine
  • Trigger: MUGAST + Vamos %100
  • Target #3
  • Beam: 14O
  • Intensity: variable
  • Brho = 0.5199 Tm
  • CATS2 in
  • Finger Plancement

Comment:
Moving The finger
VAMOS is Open

Stop at 2019-04-12 22:39:59.872754
Stop comment: finger position at +12 mm
Fixede744s Fri Apr 12 22:40:26 2019 OttoRunRUNGeneralCH2Run118
*************************
Run : 118
*************************

Start at 2019-04-12 22:40:07.011114

Run Conditions:
  • Operator: Antoine
  • Trigger: MUGAST + Vamos %100
  • Target #3
  • Beam: 14O
  • Intensity: variable
  • Brho = 0.5199 Tm
  • CATS2 in
  • Finger at +12 mm

Comment:
Moving The finger
VAMOS is Open

Stop at 2019-04-12 23:02:06.020781
Stop comment: Stoping to change CATS (1->%30000) and VAMOS Div (100->1000)
Fixede744s Fri Apr 12 23:17:13 2019 OttoRunRUNGeneralCH2Run119
*************************
Run : 119
*************************

Start at 2019-04-12 23:15:13.390175

Run Conditions:
  • Operator: Antoine
  • Trigger: MUGAST + Vamos %1000 + CATS %30000
  • Target #3
  • Beam: 14O
  • Intensity: ~6e4
  • Brho = 0.5199 Tm
  • CATS2 in
  • Finger at +12 mm
  • WITH AGATA


Comment:
VAMOS is Open
AGATA Coupling

Stop at 2019-04-13 00:42:48.531750
Stop comment: beam down because of heating
Fixede744s Sat Apr 13 00:32:09 2019 Faïrouz, Iulian, Antoine & coBEAMGeneralN/ATests to understand the broad width (120 mm!!!) of the beam size at the FP of VAMOS

Test 1: 14O beam on CH2 target (number 2= 105 um) and CATS2 inside:
The beam size in the FP of VAMOS was found of about: 150 mm !!!

Test 2: 14O beam on target with hole (Diameter of the hole=7mm) and CATS2 out
The beam size in the FP of VAMOS was found of about: 3 mm (to be checked with the run 112)

Test3: 14O beam on target with hole (Diameter of the hole=7mm) and CATS2 in
The beam size in the FP of VAMOS was found of about: 20 mm (to be checked with the run 113)

Test4: 14O beam on empty target and CATS2 inside
The beam size in the FP of VAMOS was found of about: 30 mm (to be checked with the run 114)

==> The problem of huge broadening of the beam size in test 1 was not due to straggling in CATS2

Test 5: 14O beam on CH2 target (number 3= 90 um, the same target that was used with 14N beam) and CATS2 inside:
The beam size in the FP of VAMOS was found of about: ~ 30 mm (to be checked with the run 115)
Bingo Happy





===> Target CH2 number 2 (105 um) has big inhomogenity problems or heavy impurities???
Fixede744s Sat Apr 13 04:18:00 2019 OttoRunRUNGeneralCH2Run120
*************************
Run : 120
*************************

Start at 2019-04-13 04:16:55.016739

Run Conditions:
  • Operator: Mariluz Nikola Nicolas
  • Trigger: MUGAST + Vamos %1000 + CATS %30000
  • Target #3
  • Beam: 14O
  • Intensity: ~2e4
  • Brho = 0.5199 Tm
  • CATS2 in
  • Finger at +12 mm
  • WITH AGATA


Comment:
VAMOS is Open
AGATA Coupling

Stop at 2019-04-13 05:59:11.698155
Stop comment: CATS Internal trip

Stop at 2019-04-13 06:20:42.444844
Stop comment: VAMOS cut off
Fixede744s Sat Apr 13 04:35:43 2019 Mariluz Nikola NicolasBEAMGeneralCH2Beam was back for 10 min, and lost after efficiency problem in CSS2
VAMOS and MUGAST spectra were checked after the beam was back. Everything looks OK (e.g. similar to previous screenshots)

Waiting for beam again....
Fixede744s Sat Apr 13 05:10:01 2019 Mariluz Nikola NicolasBEAMGeneralCH2Beam is back @ 2e4 pps (CATS)
Beam is back, yeah!
Fixede744s Sat Apr 13 06:31:51 2019 OttoRunRUNGeneralCH2Run122
*************************
Run : 122
*************************

Start at 2019-04-13 06:31:24.179531

Run Conditions:
  • Operator: Mariluz Nikola Nicolas
  • Trigger: MUGAST + Vamos %1000 + CATS %30000
  • Target #3
  • Beam: 14O
  • Intensity: ~4e4
  • Brho = 0.5199 Tm
  • CATS2 in
  • Finger at +12 mm
  • WITH AGATA


Comment:
VAMOS is Open
AGATA Coupling
Fixede744s Sat Apr 13 06:33:35 2019 Mariluz Nikola NicolasRUNGeneralCH2Screenshots run120 v1
FAG is 0 because screenshot was taken when run was stopped
Fixede744s Sat Apr 13 10:23:01 2019 Marion, Kseniia, Dieter, Didier, GuiseppeONLINEGeneralCH2Screenshots run 122 v3
Fixede744s Sat Apr 13 10:32:59 2019 Iulian ONLINEGeneralCH2Screenshots run 122 v3
Is missing the scalers
Fixede744s Sat Apr 13 11:44:21 2019 Marion, Kseniia, Dieter, Didier, Guiseppe, IuliaHBEAMGeneralCH2tempory beam interruption
ventilation problem SPIRAL& - beam stopped for presumably appro. 10 min (PCP info)

beam is back at 11:52 h
Fixede744s Sat Apr 13 12:32:03 2019 Marion, Kseniia, Dieter, Didier, Guiseppe, IuliaHONLINEGeneralCH2Scalers
Fixede744s Sat Apr 13 13:42:22 2019 Marion, Kseniia, Dieter, Didier, Guiseppe, IuliaHRUNGeneralCH2New run 122...1 generated after 4G on disk
Fixede744s Sat Apr 13 14:19:41 2019 Marion, Kseniia, Dieter, Didier, Guiseppe, IuliaHONLINEGeneralCH2Scalers
Fixede744s Sat Apr 13 14:28:00 2019 Marion, Kseniia, Dieter, Didier, Guiseppe, IuliaHBEAMGeneralCH2PCP information - beam interruption
beam interrupted to an octupole (?) failure - prevision to be back after 10-15 min (PCB info)

14:35 h beam is back

ELOG Home Page