| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Fixed | e786s |
Thu Jun 27 03:33:26 2019 |
OttoRun | RUN | General | Cryo-3He | Run63 |
*************************
Run : 63
*************************
Start at 2019-06-27 03:33:09.910218
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Crate in System faillure.
Moving FIFO FPMW to other crate. Had to change the cable (3ns to 5ns).
To be accounted for in the TOF
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
Current ~ 30 kHz.
The cryo target pressure and temperature have slightly increased during the stop for the recover of AGATA, even before the refilling of the LHe tank.
It is probably due to a problem in the refilling of liquid nitrogen.
Stop at 2019-06-27 11:46:17.108352
Stop comment: stop |
| Fixed | e786s |
Thu Jun 27 12:28:58 2019 |
OttoRun | RUN | General | Cryo-3He | Run67 |
*************************
Run : 67
*************************
Start at 2019-06-27 12:28:26.879061
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Crate in System faillure.
Moving FIFO FPMW to other crate. Had to change the cable (3ns to 5ns).
To be accounted for in the TOF
Stop at 2019-06-27 12:46:41.949098
Stop comment: |
| Fixed | e786s |
Thu Jun 27 16:35:45 2019 |
OttoRun | RUN | General | Cryo-3He | Run68 |
*************************
Run : 68
*************************
Start at 2019-06-27 16:35:24.351472
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000 |
| Fixed | e786s |
Thu Jun 27 16:41:55 2019 |
OttoRun | RUN | General | Cryo-3He | Run65 |
*************************
Run : 65
*************************
Start at 2019-06-27 11:35:21.078920
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Crate in System faillure.
Moving FIFO FPMW to other crate. Had to change the cable (3ns to 5ns).
To be accounted for in the TOF
Stop at 2019-06-27 17:39:22.529443
Stop comment: |
| Fixed | e786s |
Thu Jun 27 17:43:15 2019 |
OttoRun | RUN | General | Cryo-3He | Run69 |
*************************
Run : 69
*************************
Start at 2019-06-27 17:42:38.280555
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
Test with only MUGAST back trigger
Stop at 2019-06-27 17:54:02.829540
Stop comment: |
| Fixed | e786s |
Thu Jun 27 17:59:20 2019 |
OttoRun | RUN | General | Cryo-3He | Run70 |
*************************
Run : 70
*************************
Start at 2019-06-27 17:58:29.855367
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
back to normal
Stop at 2019-06-27 18:37:51.816766
Stop comment: type your message here |
| Fixed | e786s |
Thu Jun 27 18:48:51 2019 |
OttoRun | RUN | General | Cryo-3He | Run71 |
*************************
Run : 71
*************************
Start at 2019-06-27 18:47:56.171341
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- MG
- square (not biased)
- M2
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
Stop at 2019-06-27 20:23:56.630240
Stop comment: |
| Fixed | e786s |
Thu Jun 27 20:26:27 2019 |
OttoRun | RUN | General | Cryo-3He | Run73 |
*************************
Run : 73
*************************
Start at 2019-06-27 20:26:17.916314
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
There is no run 72
Stop at 2019-06-27 23:04:45.884452
Stop comment: AGATA DAQ is rejectting all events |
| Fixed | e786s |
Thu Jun 27 23:28:30 2019 |
OttoRun | RUN | General | Cryo-3He | Run74 |
*************************
Run : 74
*************************
Start at 2019-06-27 23:25:00.455575
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
Stop at 2019-06-28 09:31:40.775271
Stop comment: |
| Fixed | e786s |
Fri Jun 28 10:00:25 2019 |
OttoRun | RUN | General | Cryo-3He | Run75 |
*************************
Run : 75
*************************
Start at 2019-06-28 09:59:59.505010
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
CATS threshold raised
Stop at 2019-06-28 14:33:09.843668
Stop comment: |
| Fixed | e786s |
Fri Jun 28 15:25:12 2019 |
OttoRun | RUN | General | Cryo-3He | Run76 |
*************************
Run : 76
*************************
Start at 2019-06-28 15:24:51.867946
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
beam back. Q pole issues still
Stop at 2019-06-28 16:55:27.258794
Stop comment: |
| Fixed | e786s |
Fri Jun 28 18:34:35 2019 |
OttoRun | RUN | General | Cryo-3He | Run77 |
========================================
*************************
Run : 77
*************************
Start at 2019-06-28 18:34:22.873862
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
beam back. Q pole issues still
Stop at 2019-06-29 06:14:31.307098
Stop comment: |
| Fixed | e786s |
Sat Jun 29 01:53:24 2019 |
OttoRun | RUN | General | Cryo-3He | Run77 |
| OttoRun wrote: | *************************
Run : 77
*************************
Start at 2019-06-28 18:34:22.873862
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
beam back. Q pole issues still |
Beam is back, again, at 1.53, weird behavior of CATS |
| Attachment 1: 77CATS.png
|
|
| Fixed | e786s |
Sat Jun 29 05:41:12 2019 |
OttoRun | RUN | General | Cryo-3He | Run77 |
| OttoRun wrote: |
| OttoRun wrote: | *************************
Run : 77
*************************
Start at 2019-06-28 18:34:22.873862
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
beam back. Q pole issues still |
Beam is back, again, at 1.53, weird behavior of CATS |
|
| Attachment 1: 78MM.png
|
|
| Attachment 2: 80mmetof.png
|
|
| Attachment 3: 79mg.png
|
|
| Attachment 4: 81mmede.png
|
|
| Attachment 5: 82mgetof.png
|
|
| Attachment 6: tac.png
|
|
| Attachment 7: corr.png
|
|
| Attachment 8: cats.png
|
|
| Fixed | e786s |
Sat Jun 29 05:56:40 2019 |
OttoRun | RUN | General | Cryo-3He | Run77 |
| OttoRun wrote: |
| OttoRun wrote: |
| OttoRun wrote: | *************************
Run : 77
*************************
Start at 2019-06-28 18:34:22.873862
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
beam back. Q pole issues still |
Beam is back, again, at 1.53, weird behavior of CATS |
|
After beam is back we found 350Hz on vamos focal plane, with 20kHz current. After Brho scanning we found a Brho distribution going from 1Tm to 0.4Tm. Observation of gamma rays indicates no accumulation of radioactivity in the chamber with respect to previous runs. We conclude that we may have ice layers up to 500um in the target but very in-homogeneous since we also observe 1Tm Brho. To verify maybe increase target pressure to modify the structure of the ice. CATS is tripping continuously. No VACUUM changes observed. |
| Fixed | e786s |
Sat Jun 29 06:18:06 2019 |
OttoRun | RUN | General | Cryo-3He | Run78 |
*************************
Run : 78
*************************
Start at 2019-06-29 06:17:46.891353
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
beam back. Q pole issues still
Stop at 2019-06-29 08:57:15.767428
Stop comment:
HV of Drift Chamber in VAMOS reduced from 670V to 660V in order to avoid saturation, this will keep like that in the following. |
| Fixed | e786s |
Sat Jun 29 09:32:52 2019 |
OttoRun | RUN | General | Cryo-3He | Run79 |
*************************
Run : 79
*************************
Start at 2019-06-29 09:31:41.957308
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
LN filling problem solved !!!
pressure of the target slowly increasing about 800 mbar
We are filling the target to reach 1000 mbar
Stop at 2019-06-29 12:04:05.587989
Stop comment: |
| Fixed | e786s |
Sat Jun 29 12:07:56 2019 |
OttoRun | RUN | General | Cryo-3He | Run80 |
*************************
Run : 80
*************************
Start at 2019-06-29 12:07:36.615014
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
LN filling problem solved !!!
pressure of the target slowly increasing about 820 mbar
We are filling the target to reach 1000 mbar
test cats1
Stop at 2019-06-29 13:03:26.602226
Stop comment: radioactive beam recovered |
| Fixed | e786s |
Sat Jun 29 13:08:17 2019 |
OttoRun | RUN | General | Cryo-3He | Run81 |
*************************
Run : 81
*************************
Start at 2019-06-29 13:08:04.442155
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
LN filling problem solved !!!
pressure of the target slowly increasing about 820 mbar
We are filling the target to reach 1000 mbar
test cats1
Stop at 2019-06-29 19:22:32.016536
Stop comment: |
| Fixed | e786s |
Sat Jun 29 20:31:21 2019 |
OttoRun | RUN | General | Cryo-3He | Run84 |
*************************
Run : 84
*************************
Start at 2019-06-29 20:30:36.534403
target 700mb
Brho0=0.90 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- CMG
- M2
- VAMOS%1000
- CATS%1000
all X on MUVI disabled from trigger
all threshold of MUVI1 at 1 MeV to avoid as much as possible noise
LN filling problem solved !!!
pressure of the target slowly increasing about 820 mbar
We are filling the target to reach 1000 mbar
test cats1
time calibration run |