|
Fixed, e793s, Fri Mar 12 16:58:43 2021, OttoRun, RUN, General, CD2, Run61
|
*************************
Run : 61
*************************
Start at 2021-03-12 16:57:56.722818
Test run. ACQ DT
starting again after centering the beam on the target
Beam: 3.5e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%
Stop at 2021-03-13 07:09:09.949615
Stop comment: run 61 stopped to fix AGATA acquisition problem |
|
Fixed, e744s, Thu Apr 11 01:00:46 2019, OttoRun, RUN, General, CH2, Run60
|
*************************
Run : 60
*************************
Start at 2019-04-11 00:59:35.983897
Run Conditions:
- Operator: A. Lemasson
- Trigger: VAMOS
- Target/Source: CH2 100 um (Position 3)
- Beam: 14N
- Intensity: ~ 2e+4
- Brho = 0.79067 Tm
- CATS 2 IN
Comment:
Target inserted (100 um ) and Cats2 in
Placing Finger on The beam
Vamos IC10 placed in IC12 electronics
|
|
Fixed, e786s, Wed Jun 26 10:29:30 2019, OttoRun, RUN, General, Cryo-3He, Run60
|
========================================
*************************
Run : 60
*************************
Start at 2019-06-26 10:21:51.572979
target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Restarted GTS Tree by Emmanuel
Stop at 2019-06-26 17:59:14.820418
Stop comment: change of Brho |
Fixed, e786s, Wed Jun 26 14:40:58 2019, OttoRun, RUN, General, Cryo-3He, Run60 6x
|
| OttoRun wrote: | *************************
Run : 60
*************************
Start at 2019-06-26 10:21:51.572979
target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Restarted GTS Tree by Emmanuel |
|
|
Fixed, e786s, Wed Jun 26 15:48:50 2019, OttoRun, RUN, General, Cryo-3He, Run60
|
| OttoRun wrote: |
| OttoRun wrote: | *************************
Run : 60
*************************
Start at 2019-06-26 10:21:51.572979
target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Restarted GTS Tree by Emmanuel |
|
No beeam from 15.00. According to PCP, there will be no beam for a while |
|
Fixed, e786s, Wed Jun 26 15:50:36 2019, OttoRun, RUN, General, Cryo-3He, Run60
|
| OttoRun wrote: |
| OttoRun wrote: | *************************
Run : 60
*************************
Start at 2019-06-26 10:21:51.572979
target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Restarted GTS Tree by Emmanuel |
|
No Beam since 15:00. According to PCP there will be no beam for a while. |
|
Fixed, e768s, Tue Jul 16 20:43:05 2019, OttoRun, RUN, General, LiF, Run60
|
*************************
Run : 60
*************************
Start at 2019-07-16 20:42:55.802674
15N beam tuning
50 kHz on profiler fluctuating
Target #1 1.25 mg/cm2
Brho = 0.640 Tm
plastic off
diamond on
mask: +7 mm
Stop at 2019-07-17 01:55:00.437286
Stop comment: Test run (many modifications during this run) |
|
Fixed, e768s, Wed Jul 17 08:44:41 2019, OttoRun, RUN, General, LiF, Run60
|
| OttoRun wrote: | *************************
Run : 60
*************************
Start at 2019-07-16 20:42:55.802674
15N beam tuning
50 kHz on profiler fluctuating
Target #1 1.25 mg/cm2
Brho = 0.640 Tm
plastic off
diamond on
mask: +7 mm
Stop at 2019-07-17 01:55:00.437286
Stop comment: Test run (many modifications during this run) |
|
|
Fixed, e793s, Fri Mar 12 15:19:35 2021, OttoRun, RUN, General, CD2, Run60
|
*************************
Run : 60
*************************
Start at 2021-03-12 15:19:14.732769
Test run. ACQ DT
ATC6 pos 0 is back
14C is removed
starting again after beam line reparation of power supply
Beam: 3.5e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%
Stop at 2021-03-12 16:53:37.438208
Stop comment: stop run after tuning of the beam |
|
Fixed, e768s, Mon Jul 15 19:56:52 2019, OttoRun, RUN, General, 3-alpha, Run6
|
*************************
Run : 6
*************************
Start at 2019-07-15 17:39:19.237140
3 alpha calibration run
+ MM2 masks
+ suppressed pedestals (new pedestal for all trap detectors)
Square detectors:
+ MG10: not biased
+ MG9 removed |
|
Fixed, e744s, Thu Apr 11 00:28:44 2019, OttoRun, RUN, General, CH2, Run59
|
*************************
Run : 59
*************************
Start at 2019-04-11 00:27:28.387554
Run Conditions:
- Operator: A. Lemasson
- Trigger: VAMOS
- Target/Source: CH2 100 um (Position 2)
- Beam: 14N
- Intensity: ~ 2e+4
- Brho = 0.79067 Tm
- CATS 2 IN
Comment:
Target inserted (100 um ) and Cats2 in
Placing Finger on The beam
Stop at 2019-04-11 00:49:00.966603
Stop comment: |
|
Fixed, e786s, Wed Jun 26 05:33:50 2019, OttoRun, RUN, General, Cryo-3He, Run59
|
*************************
Run : 59
*************************
Start at 2019-06-26 05:32:53.325868
target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
5 to 5h30 - Restarted GTS Tree by Emmanuel
6h00 - Validation broken again
Stop at 2019-06-26 09:44:56.521500
Stop comment: Stopping to Realign GTS Tree |
|
Fixed, e768s, Tue Jul 16 20:37:10 2019, OttoRun, RUN, General, LiF, Run59
|
*************************
Run : 59
*************************
Start at 2019-07-16 20:35:43.781384
15N beam tuning
50 kHz on profiler fluctuating
Target #1 1.25 mg/cm2
Brho = 0.640 Tm
plastic off
diamond on
mask: +22
Stop at 2019-07-16 20:42:51.944331
Stop comment: wrong mask position |
|
Fixed, e793s, Fri Mar 12 13:40:59 2021, OttoRun, RUN, General, CD2, Run59
|
*************************
Run : 59
*************************
Start at 2021-03-12 13:40:31.431982
Test run. ACQ DT
(ATC6 crystal stopped)
starting again after beam line reparation of power supply
Beam: 3.5e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%
Stop at 2021-03-12 13:42:17.319503
Stop comment: stopping daq because agata daq did not start |
|
Fixed, e744s, Thu Apr 11 00:03:37 2019, OttoRun, RUN, General, N/A, Run58
|
========================================
*************************
Run : 58
*************************
Start at 2019-04-11 00:03:18.437004
Run Conditions:
- Operator: A. Lemasson
- Trigger: VAMOS
- Target/Source: No Target
- Beam: 14N
- Intensity: ~ 1e3
- Brho = 0.79067 Tm
- CATS 2 IN
Comment:
Reference Run Without target and IC OK PPAC voltages were too low in MW08
C6 E5-H0 -1.5
C6 E3-VE 0.5
After Setting IC Threshold
Placing Finger on The beam
Stop at 2019-04-11 00:16:46.322754
Stop comment:
run58_Brho_Cats2_14N.png -> Brho no target Cats2 |
|
Fixed, e744s, Thu Apr 11 00:06:50 2019, A. Lemasson, RUN, General, N/A, Run58
|
| Without Finger 21 kHz -> Reduced to 800 Hz with finger |
|
Fixed, e786s, Tue Jun 25 16:58:53 2019, OttoRun, RUN, General, Cryo-3He, Run58
|
========================================
*************************
Run : 58
*************************
Start at 2019-06-25 16:56:44.425517
target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Beam is back
scaler_run_58.png taken at the beginning of the run.
Stop at 2019-06-26 05:02:52.980409
Stop comment: |
|
Fixed, e786s, Tue Jun 25 18:14:38 2019, OttoRun, RUN, General, Cryo-3He, Run58
|
| OttoRun wrote: | *************************
Run : 58
*************************
Start at 2019-06-25 16:56:44.425517
target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Beam is back
scaler_run_58.png taken at the beginning of the run. |
In the CATS position spectra the central part is missing.
It is possible that the gain is two high for the actual high intensity of the beam. |
|
Fixed, e786s, Tue Jun 25 22:20:36 2019, Franco, RUN, General, Cryo-3He, Run58
|
| OttoRun wrote: |
| OttoRun wrote: | *************************
Run : 58
*************************
Start at 2019-06-25 16:56:44.425517
target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Beam is back
scaler_run_58.png taken at the beginning of the run. |
In the CATS position spectra the central part is missing (maybe for the high intensity of the beam?).
We can anyway recover the time information.
After the decrease of the high voltage of VAMOS drift chamber to avoid saturation of the signals
the BRho resolution has worsened of about 25% (see attachment). We will now increase it again (h. 22.30). |
|
Fixed, e786s, Tue Jun 25 23:55:34 2019, Franco, RUN, General, Cryo-3He, Run58
|
| Franco wrote: |
| OttoRun wrote: |
| OttoRun wrote: | *************************
Run : 58
*************************
Start at 2019-06-25 16:56:44.425517
target 700mb
Brho0=0.95 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Beam is back
scaler_run_58.png taken at the beginning of the run. |
scaler_run_58.png is taken after 7h. |
In the CATS position spectra the central part is missing (maybe for the high intensity of the beam?).
We can anyway recover the time information.
After the decrease of the high voltage of VAMOS drift chamber to avoid saturation of the signals
the BRho resolution has worsened of about 25% (see attachment). We will now increase it again (h. 22.30). |
|
|
|
|