Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
Fixed | TEST |
Sat Apr 13 21:25:17 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS0 Slot: 2 (A1821HMP) Channel:6 Vmon: 558.25 V Imon: 0.385 uA Status: OVER CURRENT
FP_CATS1 Slot: 2 (A1821HMP) Channel:7 Vmon: 558.75 V Imon: 0.374 uA Status: OVER CURRENT
|
Fixed | TEST |
Sat Apr 13 21:26:07 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS2 Slot: 2 (A1821HMP) Channel:8 Vmon: 569.5 V Imon: 0 uA Status: OVER CURRENT
|
Fixed | TEST |
Sat Apr 13 21:26:16 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS0 Slot: 2 (A1821HMP) Channel:6 Vmon: 37.25 V Imon: 0 uA Status: INTERNAL TRIP
FP_CATS1 Slot: 2 (A1821HMP) Channel:7 Vmon: 57.75 V Imon: 0 uA Status: INTERNAL TRIP
|
Fixed | TEST |
Sat Apr 13 21:26:49 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS3 Slot: 2 (A1821HMP) Channel:9 Vmon: 542.75 V Imon: 0.447 uA Status: OVER CURRENT
|
Fixed | e744s |
Sat Apr 13 21:34:02 2019 |
Adrien Matta -> update Iulian | RUN | General | N/A | Inconsistent info in the run message-fix explained in reply |
Be careful to fill in correctly all info in the start run message.
There is inconsistency in run 121 comment (target 2) and list (target 3).
Thèse information will be used for the analysis.
Iulian->
This discrepancy has been addressed |
Fixed | e744s |
Sat Apr 13 21:47:40 2019 |
Sylvain | RUN | General | CH2 | Log & Scalers -- Run 122 at 21:45 |
|
Attachment 1: run122_1_scalers_v11.png
|
|
Attachment 2: run122_Vamos9_1.png
|
|
Attachment 3: run122_Vamos9_2.png
|
|
Attachment 4: run122_Vamos9_3.png
|
|
Attachment 5: run122_Vamos9_4.png
|
|
Attachment 6: run122_Vamos9_5.png
|
|
Attachment 7: run122_Vamos9_6.png
|
|
Attachment 8: run122_Vamos9_7.png
|
|
Attachment 9: run122_Vamos9_8.png
|
|
Attachment 10: run122_Vamos9_9.png
|
|
Attachment 11: run122_Vamos9_10.png
|
|
Attachment 12: run122_Vamos9_11.png
|
|
Attachment 13: run122_1_Mugast_9_1.png
|
|
Attachment 14: run122_1_Mugast_9_2.png
|
|
Attachment 15: run122_1_Mugast_9_3.png
|
|
Attachment 16: run122_1_Mugast_9_4.png
|
|
Attachment 17: run122_1_Mugast_9_5.png
|
|
Attachment 18: run122_1_Mugast_9_6.png
|
|
Attachment 19: run122_1_Mugast_9_7.png
|
|
Attachment 20: run122_1_Mugast_9_8.png
|
|
Fixed | TEST |
Sat Apr 13 21:48:12 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS1 Slot: 2 (A1821HMP) Channel:7 Vmon: 523.75 V Imon: 0.991 uA Status: OVER CURRENT
|
Ongoing | e744s |
Sat Apr 13 21:57:48 2019 |
Adrien Matta | RUN | General | N/A | Inconsistent info in the run message |
Adrien Matta wrote: | Be careful to fill in correctly all info in the start run message.
There is inconsistency in run 121 comment (target 2) and list (target 3).
Thèse information will be used for the analysis. |
--> Well.. in entry 4175 it is written target 3...
... ... |
Fixed | e744s |
Sat Apr 13 22:04:32 2019 |
Adrien Matta | RUN | General | N/A | Inconsistent info in the run message |
Adrien Matta wrote: | Be careful to fill in correctly all info in the start run message.
There is inconsistency in run 121 comment (target 2) and list (target 3).
Thèse information will be used for the analysis. |
--> The misleading comment is preseved from run 103,
... the last #2 target was at run 110
... Iulian is removing the comments on #2 target that appear untill 121 |
Fixed | e744s |
Sat Apr 13 22:10:37 2019 |
OttoRun | RUN | General | CH2 | Run121 |
OttoRun wrote: | *************************
Run : 121
*************************
Start at 2019-04-13 06:16:15.350431
Run Conditions:
- Operator: Mariluz Nikola Nicolas
- Trigger: MUGAST + Vamos %1000 + CATS %30000
- Target #3
- Beam: 14O
- Intensity: ~2e4
- Brho = 0.5199 Tm
- CATS2 in
- Finger at +12 mm
- WITH AGATA
Comment:
Start Target 2: 104 um
VAMOS is Open
AGATA Coupling |
|
Fixed | e744s |
Sat Apr 13 22:40:00 2019 |
Diego | VAMOS | General | | Saturation in the WIRES of Drift chamber due to Pile-Up |
There is Saturation in the Energy of the WIRES due to the Pile-up, it is not urgent to correct it because these parameters are not needed for the reconstruction. Tomorrow morning, when stopping the run, we should change the offsets in NUMEXO in order to better allocate the amplitude of the signals. |
Attachment 1: DC_Wire_saturation.png
|
|
Fixed | e744s |
Sat Apr 13 22:45:27 2019 |
Beyhan, Sylvain, Jaromir | AGATA | Software | N/A | Agata yellow phase 1 minute |
Agata yellow 1 minute
All the trigers emitted by (every) single crystal were refused by ACQ for 1 minute.
Reason unknown now. |
Fixed | e744s |
Sat Apr 13 23:02:27 2019 |
Valerian, Freddy and Iulian | OFFLINE | General | CH2 | Very preliminary results for two protons |
Join are very preliminary spectra for the two protons events gated on 13N in VAMOS with a multiplicity 2 event in MUST2. |
Attachment 1: TwoProtons_run122_0_1.png
|
|
Fixed | e744s |
Sat Apr 13 23:19:57 2019 |
Valerian, Freddy, Iulian and Fairouz | OFFLINE | Software | CH2 | Very preliminary results for two protons |
Join are very preliminary spectra for the two protons events gated on 13N in VAMOS with a multiplicity 1 event in MUST2. This condition adds a lot of noise. |
Attachment 1: TwoProtonsMult1_run122_0_1.png
|
|
Fixed | e744s |
Sat Apr 13 23:25:14 2019 |
iulian | RUN | General | N/A | Inconsistent info in the run message |
This inconsistency has been addressed
Adrien Matta wrote: |
Adrien Matta wrote: | Be careful to fill in correctly all info in the start run message.
There is inconsistency in run 121 comment (target 2) and list (target 3).
Thèse information will be used for the analysis. |
--> Well.. in entry 4175 it is written target 3...
... ... |
|
Fixed | e744s |
Sun Apr 14 00:06:05 2019 |
Chloé, Fairouz, Sylvain, Damien | RUN | General | CH2 | Log & Scalers -- Run 122 at 00:06 |
|
Attachment 1: run122_1_scalers_v12.png
|
|
Attachment 2: run122_1_Mugast_10_8.png
|
|
Attachment 3: run122_1_Mugast_10_7.png
|
|
Attachment 4: run122_1_Mugast_10_6.png
|
|
Attachment 5: run122_1_Mugast_10_5.png
|
|
Attachment 6: run122_1_Mugast_10_4.png
|
|
Attachment 7: run122_1_Mugast_10_3.png
|
|
Attachment 8: run122_1_Mugast_10_2.png
|
|
Attachment 9: run122_1_Mugast_10_1.png
|
|
Attachment 10: run122_Vamos10_11.png
|
|
Attachment 11: run122_Vamos10_10.png
|
|
Attachment 12: run122_Vamos10_9.png
|
|
Attachment 13: run122_Vamos10_8.png
|
|
Attachment 14: run122_Vamos10_7.png
|
|
Attachment 15: run122_Vamos10_6.png
|
|
Attachment 16: run122_Vamos10_5.png
|
|
Attachment 17: run122_Vamos10_4.png
|
|
Attachment 18: run122_Vamos10_3.png
|
|
Attachment 19: run122_Vamos10_2.png
|
|
Attachment 20: run122_Vamos10_1.png
|
|
Fixed | e744s |
Sun Apr 14 02:04:32 2019 |
Faïrouz, Chloé, Sylvain & Damien | RUN | General | CH2 | Beam lost |
Beam stopped because of the HF of C01.
L'astreinte va venir. Arrêt estimé une demi-heure ou plus.
On a remarqué sur le spectre impact qu'on a perdu deux strips de plus sur le MUST2 haut-gauche à partir du run 120 6h00 du matin |
Attachment 1: run122_Vamos11_1.png
|
|
Attachment 2: run122_Vamos11_2.png
|
|
Attachment 3: run122_Vamos11_3.png
|
|
Attachment 4: run122_Vamos11_4.png
|
|
Attachment 5: run122_Vamos11_5.png
|
|
Attachment 6: run122_Vamos11_6.png
|
|
Attachment 7: run122_Vamos11_7.png
|
|
Attachment 8: run122_Vamos11_8.png
|
|
Attachment 9: run122_Vamos11_9.png
|
|
Attachment 10: run122_Vamos11_10.png
|
|
Attachment 11: run122_Vamos11_11.png
|
|
Attachment 12: run122_1_Mugast_11_1.png
|
|
Attachment 13: run122_1_Mugast_11_2.png
|
|
Attachment 14: run122_1_Mugast_11_3.png
|
|
Attachment 15: run122_1_Mugast_11_4.png
|
|
Attachment 16: run122_1_Mugast_11_5.png
|
|
Attachment 17: run122_1_Mugast_11_6.png
|
|
Attachment 18: run122_1_Mugast_11_7.png
|
|
Attachment 19: run122_1_Mugast_11_8.png
|
|
Fixed | e744s |
Sun Apr 14 03:30:28 2019 |
Iulian Iulia | OFFLINE | Social | CH2 | first calculation ECM ThetaCM for gamma-P emission |
|
Attachment 1: first_gammaP_rec.pdf
|
|
Attachment 2: Alias_iul.C
|
TTree *tTmp;
void SetAlias()
{
tTmp = (TTree*) gROOT->FindObject("PhysicsTree");
// tTmp->SetAlias("mp","1.00866491582");
// tTmp->SetAlias("m14o","14.008596706");
// tTmp->SetAlias("Elab14o","71.");//MeV
// tTmp->SetAlias("Erel14o","1.00866491582*14.008596706/(1.00866491582+14.008596706)/(1.00866491582+14.008596706)*71.");
tTmp->SetAlias("EPCM","ELab+4.4485492-2*sqrt(ELab*4.4485492)*cos(ThetaLab/57.4)");
tTmp->SetAlias("ThetaPCM","57.4*(3.14-acos((EPCM+4.4485492-ELab)/2./sqrt(EPCM*4.4485492)))");
//tTmp->SetAlias("EPCM","ELab+Erel14o-2*sqrt(ELab*Erel14o)*cos(ThetaLab)");
//tTmp->SetAlias("ThetaPCM","57.4*(3.14-atan((EPCM+Erel14o-ELab)/2./sqrt(EPCM*Erel14o)))");
}
|
Fixed | e744s |
Sun Apr 14 04:04:33 2019 |
Faïrouz, Chloé, Sylvain, Damien & Iulia | RUN | General | CH2 | Beam is back @ 3e4 pps in CATS |
|
Attachment 1: run122_1_scalers_v13.png
|
|
Fixed | e744s |
Sun Apr 14 04:11:22 2019 |
Faïrouz, Chloé, Sylvain, Damien & Iulia | RUN | General | CH2 | Beam is @ 6e4 pps in CATS |
Beam Beam is @ 6e4 pps in CATS now but it continuous increasing |