ELOG MUGAST

MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO

MUGAST, Page 31 of 132

Not logged in

Find | Login

Full | Summary | Threaded | Hide attachments

2636 Entries

Goto page Previous 1, 2, 3 ... 30, 31, 32 ... 130, 131, 132 Next

Fri Jul 19 09:38:05 2019

Impact matrix for MUGAST

Attachment 1: mugast_missing_strip.png

Fixed

e768s

Fri Jul 19 10:35:05 2019

*************************
Run : 113
*************************

Start at 2019-07-19 10:35:00.811685

JUNK

Stop at 2019-07-19 10:42:58.694755
Stop comment: type your message here

Stop at 2019-07-19 10:51:03.268053
Stop comment: type your message here

Fixed

e768s

Fri Jul 19 12:06:44 2019

*************************
Run : 115
*************************

Start at 2019-07-19 10:53:00.945262

same conditions as before
LiF target
Brho=0556

GMT triggers :
MG
Square
MM
Vamos div
Baf2 div

Beam optimization during this run to try to improve intensity

Attachment 1: run_115_scaler1.png

Attachment 2: run_115_IC_IC.png

Attachment 3: run_115_REC.png

Attachment 4: run_115_TAC.png

Attachment 5: run_115_IC2.png

Attachment 6: run_115_IC.png

Attachment 7: run_115_Ewire.png

Attachment 8: run_115_DCY.png

Attachment 9: run_115_DCXpng.png

Attachment 10: run_115_MM_MG_ERaw.png

Attachment 11: run_115_Tac.png

Attachment 12: run_115_MG_ToF.png

Attachment 13: run_115_MM_DeE.png

Attachment 14: run_115_MM_Tof.png

Attachment 15: run_115_MG_impact.png

Attachment 16: run_115_MM_impact.png

Attachment 17: run_115_scaler2.png

Fixed

e768s

Fri Jul 19 13:09:14 2019

Counting rates as a function of beam intensity

checking counting rates as a function of increasing beam intensity

Attachment 1: IMG_20190719_130411.jpg

Fixed

e768s

Fri Jul 19 13:24:01 2019

g-ray spectrum (run 112) requiring 19Ne in VAMOS

Attachment 1: 21.png

Fixed

e768s

Fri Jul 19 14:44:30 2019

The diamond detector is not behaving properly

On the image attached we can see the counting rate of the diamond (Red) going up linearly while Vamos (blue) staty stables.
This is understood as the diamond's graphite impurities charging up with the beam, so the baseline is moving up and we trigger more and more on noise. At some point I expect the counting rate to start dropping as the detector is no longer polarized.

Attachment 1: dimaond_is_not_working.png

Fixed

e768s

Fri Jul 19 15:11:10 2019

mugast

OFFLINE

General

Procedure for run conversion and analysis

Here is the procedure to convert a run with VAMOS and AGATA data and add those data to the Kinematic plot.

Every 4GB there will be a file change, to see if there is a file change type:

ls -ltrh /data/mugastX/e768s/acquisition/run/

Convert the last 4GB file and add it to the chain through the following steps:

Open a terminal from one of the Mugast computer:
Type: source $HOME/GoToVamosAna
Type: MyVAna -d2Ar -f /data/mugastX/e768s/acquisition/run/run_$$$$-DD-MM-YY.HHhMMmSSs /data/mugastX/e768s/acquisition/run/RootA/r$$$$_000a.root

OR (in case the run is split in more files)

Type: MyVAna -d2Ar -f /data/mugastX/e768s/acquisition/run/run_$$$$-DD-MM-YY.HHhMMmSSs.N /data/mugastX/e768s/acquisition/run/RootA/r$$$$_00Na.root

(If you get the error "Could not find the BrhoRef for the run <RunNr> ", update the ./Calibs/ListBrho.dat file with relevant Brho for RunNr)

Now you would be already able to run npanalysis to analyze the data VAMOS+Mugast with the following procedure:

Type: exit (to exit the VAMOS environment)
Type: lpcgrit (to load the analysis environment)
Type: npp MUGAST
Edit the exe_e768s.sh to specify which runs to analyze. The command should be the following:

npanalysis -D mugast.detector -C Calibration.txt -E ./Reaction/15N7Lit.reaction -T /data/mugastX/e768s/acquisition/run/RootA/r$$$$_00Na.root AD -O run_$$$$_N.root

Type: ./exe_e768s.sh

To convert a run including the AGATA data, the procedure is the following:
Go to the AGATA analysis computer (last on the right close to the window in the acquisition room), open a terminal and type the following commands:

> a4
> t e768s
> cd Replay
>./do_global_replay.sh -run ## (## is the number of the run you want to convert).

When it is finished, copy the root file to the GANIL world:

> mkdir /dataganil/e768s/acquisition/root_agata/run_00##/
> cp ./run_00##/Out/Analysis/Tree_00*.root /dataganil/e768s/acquisition/root_agata/run_00##/.

Now you can analyze the file using npanalysis.
The command in the exe_e768s.sh file should now look like:

npanalysis -D mugast.detector -C Calibration.txt -E ./Reaction/15N7Lit.reaction -T /data/mugastX/e768s/acquisition/root_agata/run_00##/Tree_000N.root TreeMaster -O run_00##_N_agata.root

The run will be created in the ./NPOutputs folder.
Bon courage!

Fixed

e768s

Fri Jul 19 15:15:47 2019

19Ne identification in VAMOS together with MUGAST

Attachment 1: VAMOS_MUGAST_IDENTIFICATION.png

Fixed

e768s

Fri Jul 19 15:18:38 2019

Position of 19Ne in dE:E in VAMOS

Conclusion: IC pressure not needed to be reduced.

Attachment 1: Position_Of_19Ne_In_dEE.png

Fixed

e768s

Fri Jul 19 15:55:38 2019

Run 115 stopped at 16h40.

Attachment 1: VAMOS_MUGAST_IDENTIFICATION1.png

Attachment 2: run_115_scaler3.png

Attachment 3: run_115_scaler2.png

Attachment 4: run_115_scaler1.png

Attachment 5: run_115_IC_IC.png

Attachment 6: run_115_REC.png

Attachment 7: run_115_TAC.png

Attachment 8: run_115_IC2.png

Attachment 9: run_115_IC.png

Attachment 10: run_115_Ewire.png

Attachment 11: run_115_DCY.png

Attachment 12: run_115_DCXpng.png

Attachment 13: run_115_MM_MG_ERaw.png

Attachment 14: run_115_Tac.png

Attachment 15: run_115_MG_ToF.png

Attachment 16: run_115_MM_DeE.png

Attachment 17: run_115_MM_Tof.png

Attachment 18: run_115_MG_impact.png

Attachment 19: run_115_MM_impact.png

Fixed

e768s

Fri Jul 19 16:43:08 2019

*************************
Run : 116
*************************

Start at 2019-07-19 16:42:58.163547

Stop at 2019-07-20 04:34:58.716855
Stop comment: type your message here

Stop at 2019-07-20 10:40:22.875934
Stop comment: loss beam, premary beam monitor

Fixed

e768s

Fri Jul 19 17:15:46 2019

Attachment 1: run116-Scaler2.png

Fixed

e768s

Fri Jul 19 17:33:21 2019

Nicolas

OTHER

General

AGATA: what if a crystal status get red

1. Go to the AGATA Digitizer: Control tab of the browser
2. Select the detector and crystal, then click 'Select'
3. Click the 'ReSync Current Digitizer Optical Link'

Normally it should go green again, otherwise call AGATA people

Fixed

e768s

Fri Jul 19 17:52:24 2019

Nicolas

OTHER

General

AGATA: replaying runs

1. Go to the AGATA analysis computer, open a terminal and execute the following commands:
> a4
> t e768s
> cd Replay
> ./do_global_replay.sh -run ### (### is the run number you want to convert)
if it complains that the folder with the run already exists, just > rm -rf runXXXX/ (where XXXX is the run you're replaying) in the Replay folder

2. When it is finished copy the root file to the GANIL world:
> mkdir /dataganil/e768s/acquisition/root_agata/run_0###
> cp ./run_0###/Out/Analysis/Tree_00*.root /dataganil/e768s/acquisition/run_0###

Fixed

e768s

Fri Jul 19 18:57:12 2019

Attachment 1: Diamond_VAMOS_run116_3.png

Attachment 2: Scalers_run116_3.png

Attachment 3: IC_run116_3.png

Attachment 4: PF_run116_3.png

Attachment 5: T_MUGAST_VAMOS_run116_3.png

Attachment 6: ID1d_run116_3.png

Attachment 7: MW_run116_3.png

Attachment 8: Ewire_run116_3.png

Attachment 9: Twire_run116_3.png

Attachment 10: SumDC_run116_3.png

Attachment 11: MM_MG_Eraw_run116_3.png

Attachment 12: MM_ETOF_run116_3.png

Attachment 13: MG_ETOF_run116_3.png

Attachment 14: MM_EDE_run116_3.png

Attachment 15: TAC_run116_3.png

Attachment 16: MM_Impact_run116_3.png

Attachment 17: MG_Impact_run116_3.png

Fixed

e768s

Fri Jul 19 21:43:35 2019

screenshots run 116 @ 21h30

Attachment 1: T_MUGAST_VAMOS_run116_4.png

Attachment 2: IC_run116_4.png

Attachment 3: DC_X_run116_4.png

Attachment 4: DC_Y_run116_4.png

Attachment 5: DC_E_run116_4.png

Attachment 6: MW_run116_4.png

Attachment 7: PF_run116_4.png

Attachment 8: MM_MG_Eraw_run116_4.png

Attachment 9: MM_MG_Traw_run116_4.png

Attachment 10: Correlation_run116_4.png

Attachment 11: TAC_run116_4.png

Attachment 12: MG_ETOF_run116_4.png

Attachment 13: MM_EDE_run116_4.png

Attachment 14: MM_ETOF_run116_4.png

Attachment 15: MG_Impact_run116_4.png

Attachment 16: MM_Impact_run116_4.png

Attachment 17: Scalers_run116_4.png

Fixed

e768s

Fri Jul 19 22:16:43 2019

How to restart the vamos spectrum visualization (on the mugast daq computer)

On the mugast DAQ computer:

* Open a terminal
* Type "GoToVamosAna"
* Type "vigru"
* In vigru: File, Open config -> vigru_ganp154.xml
* Then: Setup, Sources, Host/FileName: "ganp154", port:9090

If a spectrum is missing -> Add it with "display one histo"

Fixed

e768s

Fri Jul 19 23:10:18 2019

Added energy calibration for square detector (MG 10).

OttoRun wrote:

*************************
Run : 302
*************************

Start at 2019-07-11 16:54:22.512184

3 alpha calibration run
+ without MM2 masks
+ suppressed pedestals

Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked

Stop at 2019-07-12 05:44:35.805449
Stop comment:

Attachment 1: run302_MG_Ecal.png