Fixed, e744s, Fri Apr 12 10:12:45 2019, Valerian, OFFLINE, Software, CH2, Comparison between HF and CATS for ELab ThetaLab 
|
| Using the HF show noises that is not seen with CATS on the ToF spectra |
|
Fixed, e744s, Fri Apr 12 10:17:57 2019, OttoRun, RUN, General, CH2, Run95
|
*************************
Run : 95
*************************
Start at 2019-04-12 10:09:45.911078
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
working inside G1
Stop at 2019-04-12 10:33:06.491018
Stop comment: |
|
Fixed, e744s, Fri Apr 12 10:36:09 2019, Valerian, RUN, General, N/A, Procedure to follow during runs
|
At the beginning of a run :
- Do screenshots of the scalers and add them to the elog.(Say it is at the beginning of the run)
During a run, one should :
- Check regularly the scalers.
- Look at the different pages on vigru.
- Check if there are any problem concerning the Voltages, a window should be prompted to you if it is the case. If the window has FP written it is on the VAMOS side.
- Do conversion, see corresponding entry (Or paper next to computer)
- Check the last pending issues in the elog and if they are fixed, edit them to fix (any HV trip or over-current are pending and shoudl be switch to fix).
Every hours and before stopping the run:
- Do screenshots of the scalers and add them to the elog.(Say at which time it is done)
- Do screenshots of all the vigru pages of MUGAST and VAMOS and add them to the elog.
|
|
Fixed, e744s, Fri Apr 12 10:37:03 2019, OttoRun, RUN, General, CH2, Run96
|
*************************
Run : 96
*************************
Start at 2019-04-12 10:36:45.359601
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Timing Setting
Stop at 2019-04-12 11:16:49.078211
Stop comment: Entering Change Delay on T_FPMW_CATS2 |
|
Fixed, TEST, Fri Apr 12 11:09:53 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 649.75 V Imon: 0.013 uA Status: OVER CURRENT
|
|
Fixed, e744s, Fri Apr 12 11:29:46 2019, OttoRun, RUN, General, CH2, Run97
|
*************************
Run : 97
*************************
Start at 2019-04-12 11:29:03.948068
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Correct TAC T_FPMW_XXX FPMW Fifo Pb with 50 ohm terminator ...
Stop at 2019-04-12 11:45:25.662355
Stop comment: Entering to Set Vamos %100 |
|
Fixed, TEST, Fri Apr 12 11:57:28 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 626.75 V Imon: 0.289 uA Status: OVER CURRENT
|
|
Fixed, TEST, Fri Apr 12 12:02:55 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 639.25 V Imon: 0.169 uA Status: OVER CURRENT
|
|
Fixed, e744s, Fri Apr 12 11:55:26 2019, OttoRun, RUN, General, CH2, Run98 12x
|
========================================
*************************
Run : 98
*************************
Start at 2019-04-12 11:54:05.693507
Run Conditions:
- Operator: Iulian ,Antoine, Diego
- Trigger: MUGAST + Vamos %100
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: increasing intensity to 10kHz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Stop at 2019-04-12 12:30:17.695767
Stop comment: Stoping to give beam to IBE to do reference Measurement |
|
Fixed, e744s, Fri Apr 12 12:04:55 2019, OttoRun, RUN, General, CH2, Run98
|
| OttoRun wrote: | *************************
Run : 98
*************************
Start at 2019-04-12 11:54:05.693507
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos %100
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: increasing intensity to 10kHz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Trip of DC2_W : Reducing HV of DC2_W from 650 to 620V
|
|
|
Fixed, TEST, Fri Apr 12 12:14:08 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 513 V Imon: 0.999 uA Status: OVER CURRENT
|
|
Fixed, TEST, Fri Apr 12 12:15:31 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC1_w1 Slot: 2 (A1821HMP) Channel:0 Vmon: 666.5 V Imon: 0.253 uA Status: OVER CURRENT
FP_DC1_w2 Slot: 2 (A1821HMP) Channel:1 Vmon: 659.25 V Imon: 0.264 uA Status: OVER CURRENT
|
|
Fixed, TEST, Fri Apr 12 12:17:51 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC1_w2 Slot: 2 (A1821HMP) Channel:1 Vmon: 9 V Imon: 0 uA Status: INTERNAL TRIP
|
|
Fixed, TEST, Fri Apr 12 12:25:55 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 612.75 V Imon: 0.123 uA Status: OVER CURRENT
|
|
Fixed, e744s, Fri Apr 12 13:34:33 2019, iulian, OTHER, General, N/A, E744 Status
|
1) Beam tuning during the night.
2) around 04h00 started runs at 4e+4
3) beam intensity decreased to 1e+4 @7h30 in the morning.
4) Vamos tuning at 8h
5) run low intensity at 12h30 et high intensity (1e+4) @13h.
6) @13h give the beam to PCP to increase the beam intensity. First IBE measurement
7) If beam I<5e+4 measure directly in Vamos
8) If beam I>5e+4 we have to cut in part the beam in Vamos or not use Vamos
|
|
Fixed, e744s, Fri Apr 12 13:53:56 2019, diego, OTHER, General, , intervention
|
TAC FPMW_HF in VAMOS was still out of range for MUGAST physics
We increased the range from 1us to 2us and applied a delay of 200 ns to the stop of the TAC. |
|
Fixed, e744s, Fri Apr 12 14:13:11 2019, Giuseppe D'Agata, OTHER, Software, N/A, Converted runs
|
Runs additionally converted up to now:
70
71
80.0
80.1
81.0
81.1
82
83
84
85
86.1
91
94
95
96.1
97
98 |
|
Fixed, TEST, Fri Apr 12 14:14:35 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC1_w1 Slot: 2 (A1821HMP) Channel:0 Vmon: 674.5 V Imon: 0 uA Status: OVER CURRENT
|
|
Fixed, e744s, Fri Apr 12 14:21:04 2019, OttoRun, RUN, General, CH2, Run99
|
*************************
Run : 99
*************************
Start at 2019-04-12 14:20:41.671438
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos %100
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: increasing intensity to 10kHz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Stop at 2019-04-12 14:27:41.833179
Stop comment: |
|
Fixed, e744s, Fri Apr 12 14:51:31 2019, OttoRun, RUN, General, CH2, Run101
|
*************************
Run : 101
*************************
Start at 2019-04-12 14:51:13.371974
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos %100
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: increasing intensity to 10kHz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Stop at 2019-04-12 14:56:36.459114
Stop comment: |
|
Fixed, e744s, Fri Apr 12 15:00:15 2019, OttoRun, RUN, General, CH2, Run102
|
*************************
Run : 102
*************************
Start at 2019-04-12 15:00:13.125282
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos %100
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: increasing intensity to 10kHz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Stop at 2019-04-12 15:11:34.424486
Stop comment: |
|