Fixed, e744s, Thu Apr 11 11:36:09 2019, Valerian, OFFLINE, Software, CH2, Comparison between the two e744 
|
| Current calibration is off, a shift of -1.5MeV was done to reproduce the previous data. |
|
Fixed, TEST, Thu Apr 11 11:55:42 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC1_w1 Slot: 2 (A1821HMP) Channel:0 Vmon: 632.75 V Imon: 0.32 uA Status: OVER CURRENT
|
|
Fixed, TEST, Thu Apr 11 11:58:01 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC1_w1 Slot: 2 (A1821HMP) Channel:0 Vmon: 10.25 V Imon: 0 uA Status: INTERNAL TRIP
|
|
Fixed, TEST, Thu Apr 11 13:21:33 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_CATS0 Slot: 2 (A1821HMP) Channel:6 Vmon: 567.75 V Imon: 0.173 uA Status: OVER CURRENT
|
|
Fixed, TEST, Thu Apr 11 13:22:32 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_CATS0 Slot: 2 (A1821HMP) Channel:6 Vmon: 36 V Imon: 0 uA Status: INTERNAL TRIP
|
|
Fixed, TEST, Thu Apr 11 13:43:10 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
cats2 Slot: 13 (A1835 ) Channel:1 Vmon: 541.2 V Imon: 0.9 uA Status: OVER CURRENT
|
|
Fixed, TEST, Thu Apr 11 13:43:20 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
cats2 Slot: 13 (A1835 ) Channel:1 Vmon: 189.8 V Imon: 0 uA Status: INTERNAL TRIP
|
|
Fixed, e744s, Thu Apr 11 13:43:26 2019, Valerian, OFFLINE, Software, CH2, Target position for 14N runs
|
|
|
Fixed, TEST, Thu Apr 11 13:47:10 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
cats2 Slot: 13 (A1835 ) Channel:1 Vmon: 200.7 V Imon: 0 uA Status: INTERNAL TRIP
|
|
Fixed, TEST, Thu Apr 11 13:50:22 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
cats2 Slot: 13 (A1835 ) Channel:1 Vmon: 0 V Imon: 0 uA Status: INTERNAL TRIP
|
|
Fixed, TEST, Thu Apr 11 13:51:54 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
cats2 Slot: 13 (A1835 ) Channel:1 Vmon: 170.3 V Imon: 0 uA Status: INTERNAL TRIP
|
|
Fixed, TEST, Thu Apr 11 13:55:54 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
cats2 Slot: 13 (A1835 ) Channel:1 Vmon: 193.6 V Imon: 0 uA Status: INTERNAL TRIP
|
|
Fixed, e744s, Thu Apr 11 14:03:45 2019, Valerian, CATS, Hardware, N/A, In case of a CATS2 tripped
|
Currently, CATS2 is inserted, if the window :
CATS2 has tripped appear, one should do the following :
- Open a terminal
- Type: HV
- Username is : admin
- Password is : admin
- Press enter twice
The list of channels is going to appear.
- Using the arrow of the keyboard, go down until you reach cats2
- then go right until you reach Off
- press space, the dectector should start ramping up
- If it trips again, you can try to put voltage to cats1 (right above cats2)
Two possibility :
- If cats1 trip it is the gas bottle that is empty call : 07 83 34 30 81 (Sebastien)
- If cats1 doesn't trip try cats2 again, and if it trips lower the voltage of cats2
To lower the voltage of cats2 : go to the left until you reach the first cell after cats2 name and lower the voltage 10 volts and try to start cats2 again.
THEN CLOSE THE TERMINAL |
|
Fixed, e744s, Thu Apr 11 15:16:10 2019, Adrien, Valerian, Louis, CATS, General, CH2, run77 CATS efficiency
|
CATS efficiency has been computed for run 77 using T_FagHF an T_Si_Cats1 with different triggers:
Trigger GATCONF_MASTER<8 (MUST+Mugast) : 94%
Trigger GATCONF_MASTER=4 (MUST) : 99.4%
Trigger GATCONF_MASTER=2 (square) : 85%
Trigger GATCONF_MASTER=1 (trapezoidal+annular) : 22%
The 22% resolution is due to the fact that the trapezoidal detectors are noisy. Doing the same on an analysed run we obtain ~ 85% efficiency |
|
Fixed, e744s, Thu Apr 11 16:07:59 2019, Valerian and Louis, OFFLINE, Software, CH2, HF resolution
|
| Using the value of the HF=83,4ns. We can obtain the calibrated plot of T_CATS2_HF which is joined and gives us roughly a 2-3 ns resolution for the HF |
|
Fixed, e744s, Thu Apr 11 16:56:34 2019, OttoRun, RUN, General, Empty, Run78
|
*************************
Run : 78
*************************
Start at 2019-04-11 16:55:28.720017
Run Conditions:
- Operator: Adrien
- Trigger: Mugast
- Target/Source: hole
- Beam: 14O
- Intensity: ~ 3e+3
- Brho = ?? Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Alignign beam, daq on for online monitoring
Stop at 2019-04-11 17:07:49.331973
Stop comment: changing trigger to vamos |
|
Fixed, e744s, Thu Apr 11 17:08:39 2019, OttoRun, RUN, General, Empty, Run79
|
*************************
Run : 79
*************************
Start at 2019-04-11 17:08:21.837538
Run Conditions:
- Operator: Adrien
- Trigger: VAMOS
- Target/Source: hole
- Beam: 14O
- Intensity: ~ 3e+3
- Brho = ?? Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Aligning beam, daq on for online monitoring
Stop at 2019-04-11 17:31:48.540765
Stop comment: Entering to Remove CATS2 and remove VAMOS %1000 |
|
Fixed, TEST, Thu Apr 11 17:30:58 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC1_w1 Slot: 2 (A1821HMP) Channel:0 Vmon: 674.25 V Imon: 0 uA Status: OVER CURRENT
|
|
Fixed, e744s, Thu Apr 11 17:35:21 2019, François, BEAM, General, , 14O beam is in G1 since 17H00
|
alignment of the beam in VAMOS
intensity ~ 5x10^3 pps |
|
Fixed, e744s, Thu Apr 11 17:38:24 2019, mugast (beyhan), BEAM, General, , 14O8+ beam characteristics
|
Brho 14O8+ = 0.69186 Tm
update Adrien:
La dream team de Division (non) Opération n'arrive pas a mesurer l’énergie en sortie de CIME (WTF??!!)
Du coup ils ont mis une énergie fausse mais avec une super précision de 1.8 Mev/A dans la fiche.
#onlyatganil |
|