|
Fixed, e744s, Tue Apr 9 20:07:12 2019, OttoTime, RUN, General, N/A, TimeCalibratorRun
|
*** Run Time Calibrator FSC ***
- Run: 21
- MUVI: MUVI3
|
|
Fixed, e744s, Tue Apr 9 20:30:56 2019, OttoTime, RUN, General, N/A, TimeCalibratorRun
|
*** Run Time Calibrator FSC ***
- Run: 22
- MUVI: MUVI3
|
Fixed, , Tue Apr 9 21:47:20 2019, Marlene Valerian, GRIT, General, , FSC time calibration 9th april evening 
|
Snapshot of FSC calibration just before experiment
The noisy MG detectors are still there but otherwise most of them are OK |
|
Fixed, TEST, Wed Apr 10 00:05:02 2019, OttoH.V., OTHER, Hardware, N/A, HVM_SUMMARY
|
[SIZE=5][COLOR=green][B]*** hvm watcher summary ***[/B] [/COLOR][/SIZE]
[SIZE=2][COLOR=green]+10v/mg [/COLOR] Slot: [COLOR=blue]5 [/COLOR] (A1516B) Channel:[COLOR=blue]5 [/COLOR] Vmon: [COLOR=blue] 10 V [/COLOR] Imon:
[COLOR=blue]0.389 A [/COLOR] Status: [COLOR=green]On[/COLOR]
|
|
Fixed, TEST, Wed Apr 10 00:05:03 2019, OttoH.V., OTHER, Hardware, N/A, HVM_SUMMARY
|
[SIZE=5][COLOR=green][B]*** hvm watcher summary ***[/B] [/COLOR][/SIZE]
[SIZE=2][COLOR=green] [/COLOR] Slot: [COLOR=blue]8 [/COLOR] (A1821H) Channel:[COLOR=blue]1 [/COLOR] Vmon: [COLOR=blue] 0 V [/COLOR] Imon:
[COLOR=blue] 0 uA[/COLOR] Status: [COLOR=pink]Off[/COLOR]
|
|
Fixed, e744s, Wed Apr 10 06:45:53 2019, François, BEAM, Social, , No beam yet
|
| They are about to align the beam from the cyclotron CIME to the area G1. |
|
Fixed, e744s, Wed Apr 10 06:51:35 2019, Beyhan, BEAM, General, , 14N7+ beam characteristics and settings at VAMOS
|
| |
|
Fixed, e744s, Wed Apr 10 07:15:22 2019, François, BEAM, Social, , no beam
|
They aligned the beam up to G1 Pr31 but the stripper foil was not inserted, so they have to start the work again. |
|
Fixed, e744s, Wed Apr 10 09:05:33 2019, François, BEAM, Social, , No beam in G1 yet.
|
| The beam is at the entrance of G1. |
|
Fixed, e744s, Wed Apr 10 09:06:16 2019, Adrien, OFFLINE, General, N/A, Strange size of Time Calibrator Run
|
The two run for MUVI 1 are larger than the run for MUVI2 and 3.
I think this is due to the noise on MG4 that create a lot of Data but it need to be investigated.
|
|
Fixed, e744s, Wed Apr 10 09:12:32 2019, Adrien, OTHER, General, N/A, Folder for conversion
|
I setup the various folder for conversion in : /data/mugastX/e744/acquisition/
[LIST]
|
|
Fixed, TEST, Wed Apr 10 09:13:12 2019, OttoH.V., OTHER, Hardware, N/A, HVM_SUMMARY
|
[SIZE=5][COLOR=green][B]*** hvm watcher summary ***[/B] [/COLOR][/SIZE]
[SIZE=2][COLOR=green]+10v/mg [/COLOR] Slot: [COLOR=blue]5 [/COLOR] (A1516B) Channel:[COLOR=blue]5 [/COLOR] Vmon: [COLOR=blue] 10 V [/COLOR] Imon:
[COLOR=blue]0.389 A [/COLOR] Status: [COLOR=green]On[/COLOR]
|
|
Fixed, TEST, Wed Apr 10 09:13:13 2019, OttoH.V., OTHER, Hardware, N/A, HVM_SUMMARY
|
[SIZE=5][COLOR=green][B]*** hvm watcher summary ***[/B] [/COLOR][/SIZE]
[SIZE=2][COLOR=green] [/COLOR] Slot: [COLOR=blue]8 [/COLOR] (A1821H) Channel:[COLOR=blue]1 [/COLOR] Vmon: [COLOR=blue] 0 V [/COLOR] Imon:
[COLOR=blue] 0 uA[/COLOR] Status: [COLOR=pink]Off[/COLOR]
|
|
Fixed, e744s, Wed Apr 10 09:51:36 2019, OttoRun, RUN, General, N/A, Run24
|
*************************
[SIZE=3][B]Run : 24[/B][/SIZE]
*************************
|
|
Fixed, e744s, Wed Apr 10 10:15:38 2019, François, BEAM, Social, , Beam stopped
|
A problem with the cooling water.
2 UT at least to restart the accelerator |
|
Fixed, e744s, Wed Apr 10 10:32:13 2019, OttoRun, RUN, General, N/A, Run25
|
*************************
[SIZE=3][B]Run : 25[/B][/SIZE]
*************************
|
|
Fixed, e744s, Wed Apr 10 10:36:48 2019, OttoRun, RUN, General, N/A, Run26
|
*************************
[SIZE=3][B]Run : 26[/B][/SIZE]
*************************
|
|
Fixed, e744s, Wed Apr 10 11:24:52 2019, Louis, OFFLINE, General, N/A, Time calibration for e744
|
Time calibration has been done for Mugast and MUST2 using run 17 to 22.
Calibration file are in:
/home/mugast/analysis/nptool/Projects/calibration/Time/Coeff/e744
|
|
Fixed, e744s, Wed Apr 10 11:46:04 2019, iulian, BEAM, Social, N/A, E744 Status
|
Refrigeration problem, beam stopped.
Optimistic estimation: they need 1 UT to setup CIME => 14N could be back around 20h.
Optimistic scenario still on track
|
|
Pinned, e744s, Wed Apr 10 11:57:37 2019, A. Lemasson, OFFLINE, Software, , VAMOS Conversion HowTo
|
[B]HOW TO convert a run in VAMOS[/B]
[LIST]
|
|