| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Ongoing | e775s |
Sat Feb 29 07:35:21 2020 |
mugast : Valerian | AGATA | General | CD2 | AGATA is not responding |
| Since ~4:30am AGATA is not responding, everyhting was frozen. Unclear if it comes from disk problem or other... |
| Fixed | e775s |
Sat Feb 29 08:01:52 2020 |
OttoRun | RUN | General | CD2-Au | Run161 |
*************************
Run : 161
*************************
Start at 2020-02-29 07:57:29.567615
VAMOS+AGATA+MUGAST
CD2+Au Target #2 (250-300ug + 20 umAu)
Trigger
* MG Annular
* MG Trapezoid
Beam intensity 4e+5
Restart in same conditions as run 152 after reloading RCC config and initializing
CURRENTLY ISSUES WITH AGATA : AGATA IS NOT RESPONDING SINCE ~4Am ISSUE STILL PENDING
test AGATA
Stop at 2020-02-29 08:01:56.572900
Stop comment: |
| Fixed | e775s |
Sat Feb 29 08:51:28 2020 |
OttoRun | RUN | General | CD2-Au | Run162 |
*************************
Run : 162
*************************
Start at 2020-02-29 08:49:53.401544
VAMOS+AGATA+MUGAST
CD2+Au Target #2 (250-300ug + 20 umAu)
Trigger
* MG Annular
* MG Trapezoid
Beam intensity 4e+5
Restart in same conditions as run 152 after reloading RCC config and initializing
CURRENTLY ISSUES WITH AGATA : AGATA IS NOT RESPONDING SINCE ~4Am ISSUE STILL PENDING
test AGATA
Stop at 2020-02-29 08:51:59.327149
Stop comment: agata not working |
| Fixed | e775s |
Sat Feb 29 09:02:46 2020 |
OttoRun | RUN | General | CD2-Au | Run163 |
Stop at 2020-02-29 17:52:47.142006
Stop comment: |
| Ongoing | e775s |
Sat Feb 29 10:34:31 2020 |
mugast ; valerian irene | OFFLINE | Software | CD2-Au | Issues in the EX reconstruction |
We are currently working on the EX reconstruction which is off for detector 1, 3 and 7... One of our guess might be that there is an issue with the position of the detectors which gives error in theta... As the energy calibration is ok. Joined are :
- the Excitation energy for good detectors compared to all detectors,
- the theoretical kinematic line for the 3.57 state for each detectors,
- the excitation energy as a function of the laboratory angle (for this last spectra a clear dependency is visible for telescopes 1,3 and 7)
- the 3D view, which doesn't show clear problem in position... |
| Attachment 1: Comparison_all_and_best_detector.png
|
|
| Attachment 2: Kinematics_for_each_detectors.pdf
|
|
| Attachment 3: ExvsTheta_each_detectors.pdf
|
|
| Attachment 4: MUGAST_3D.pdf
|
|
| Ongoing | e775s |
Sat Feb 29 14:27:48 2020 |
mugast ; Valerian | OFFLINE | Software | CD2 | Issues in the EX reconstruction |
| mugast ; valerian irene wrote: | We are currently working on the EX reconstruction which is off for detector 1, 3 and 7... One of our guess might be that there is an issue with the position of the detectors which gives error in theta... As the energy calibration is ok. Joined are :
- the Excitation energy for good detectors compared to all detectors,
- the theoretical kinematic line for the 3.57 state for each detectors,
- the excitation energy as a function of the laboratory angle (for this last spectra a clear dependency is visible for telescopes 1,3 and 7)
- the 3D view, which doesn't show clear problem in position... |
Testing changing the beam impact :
-Kine for beam impact = (0,0,0) for reference
-Kine for beam impact = (0,0,-5mm)
-Kine for beam impact = (0,0,+5mm)
-Ex vs ThetaLab for beam impact = (0,0,0) for reference
-Ex vs ThetaLab for beam impact = (0,0,-5mm)
-Ex vs ThetaLab for beam impact = (0,0,+5mm)
Red lines corresponds to Ex = 3.570 MeV and Ex = 4.070 MeV
To try to correct the problem i also offseted the beam in X and Y, but this doesn't solve the problem quite the opposite as it make the result worse for other detectors also... The fact that it is better at lower angle and worse at higher angle might mean that the detectors angles are tilted compared to the
surveyors measurments... I also tried to use the CAO positions for MG3 (see Detectors/mugast.detector) but it didn't solve the problem. |
| Attachment 1: Kinematics_for_each_detectorsBeamZ0.pdf
|
|
| Attachment 2: Kinematics_for_each_detectorsBeamZminus5.pdf
|
|
| Attachment 3: Kinematics_for_each_detectorsBeamZplus5.pdf
|
|
| Attachment 4: ExvsTheta_each_detectorsZ0.pdf
|
|
| Attachment 5: ExvsTheta_each_detectorsZminus5.pdf
|
|
| Attachment 6: ExvsTheta_each_detectorsZplus5.pdf
|
|
| Fixed | e775s |
Sat Feb 29 14:32:39 2020 |
mugast : Valerian | GRIT | Hardware | N/A | Scheme of the Mugast position in the nptool referential |
| The detectors with a cross show the problematic detectors |
| Attachment 1: EEDD6F02-7FF9-41B0-BB0B-673611AF018D.jpeg
|
|
| Ongoing | e775s |
Sat Feb 29 15:53:12 2020 |
mugast ; Valerian | OFFLINE | Software | CD2-Au | Issues in the EX reconstruction |
| mugast ; Valerian wrote: |
| mugast ; valerian irene wrote: | We are currently working on the EX reconstruction which is off for detector 1, 3 and 7... One of our guess might be that there is an issue with the position of the detectors which gives error in theta... As the energy calibration is ok. Joined are :
- the Excitation energy for good detectors compared to all detectors,
- the theoretical kinematic line for the 3.57 state for each detectors,
- the excitation energy as a function of the laboratory angle (for this last spectra a clear dependency is visible for telescopes 1,3 and 7)
- the 3D view, which doesn't show clear problem in position... |
Testing changing the beam impact :
-Kine for beam impact = (0,0,0) for reference
-Kine for beam impact = (0,0,-5mm)
-Kine for beam impact = (0,0,+5mm)
-Ex vs ThetaLab for beam impact = (0,0,0) for reference
-Ex vs ThetaLab for beam impact = (0,0,-5mm)
-Ex vs ThetaLab for beam impact = (0,0,+5mm)
Red lines corresponds to Ex = 3.570 MeV and Ex = 4.070 MeV
To try to correct the problem i also offseted the beam in X and Y, but this doesn't solve the problem quite the opposite as it make the result worse for other detectors also... The fact that it is better at lower angle and worse at higher angle might mean that the detectors angles are tilted compared to the
surveyors measurments... I also tried to use the CAO positions for MG3 (see Detectors/mugast.detector) but it didn't solve the problem. |
By looking at the EnergyCalibrator.C, I saw that the extrapolation used to find the dead layer of aluminum is commented... This might be an answer to the problem... |
| Fixed | TEST |
Sat Feb 29 16:16:51 2020 |
OttoH.V. | OTHER | Hardware | N/A | HVM_SUMMARY |
*** hvm watcher summary ***
+10V/t1234 Slot: 3 (A1516B) Channel:5 Vmon: 9.99 V Imon: 0.159 A Status: On
+2.5V/t1 Slot: 1 (A1518B) Channel:0 Vmon: 2.49 V Imon: 1.293 A Status: On
+2.5V/t2 Slot: 1 (A1518B) Channel:1 Vmon: 2.49 V Imon: 0.058 A Status: On
+2.5V/t3 Slot: 1 (A1518B) Channel:2 Vmon: 2.49 V Imon: 0.064 A Status: On
+2.5V/t4 Slot: 2 (A1518B) Channel:0 Vmon: 2.49 V Imon: 0.006 A Status: On
+2.5V/t5 Slot: 2 (A1518B) Channel:1 Vmon: 2.49 V Imon: 0.004 A Status: On
+2.5V/t6 Slot: 2 (A1518B) Channel:2 Vmon: 2.49 V Imon: 1.21 A Status: On
+3.3V/t123 Slot: 3 (A1516B) Channel:2 Vmon: 3.29 V Imon: 0.327 A Status: On
+5V/t123 Slot: 3 (A1516B) Channel:3 Vmon: 4.99 V Imon: 0.182 A Status: On
+5V/t456 Slot: 3 (A1516B) Channel:4 Vmon: 4.91 V Imon: 0.576 A Status: On
-2.5V/t1 Slot: 1 (A1518B) Channel:3 Vmon: 2.49 V Imon: 0.061 A Status: On
-2.5V/t2 Slot: 1 (A1518B) Channel:4 Vmon: 2.49 V Imon: 0.061 A Status: On
-2.5V/t3 Slot: 1 (A1518B) Channel:5 Vmon: 2.49 V Imon: 1.823 A Status: On
-2.5V/t4 Slot: 2 (A1518B) Channel:3 Vmon: 2.49 V Imon: 0.003 A Status: On
-2.5V/t5 Slot: 2 (A1518B) Channel:4 Vmon: 2.49 V Imon: 0.005 A Status: On
-2.5V/t6 Slot: 2 (A1518B) Channel:5 Vmon: 2.49 V Imon: 1.798 A Status: On
-5V/t123 Slot: 3 (A1516B) Channel:0 Vmon: 5 V Imon: 0.116 A Status: On
-5V/t456 Slot: 3 (A1516B) Channel:1 Vmon: 5 V Imon: 0.252 A Status: On
|
| Fixed | TEST |
Sat Feb 29 16:16:51 2020 |
OttoH.V. | OTHER | Hardware | N/A | HVM_SUMMARY |
*** hvm watcher summary ***
+10v/mg Slot: 5 (A1516B) Channel:5 Vmon: 10 V Imon: 0.407 A Status: On
+10v/t14mg Slot: 2 (A1516 ) Channel:5 Vmon: 0.01 V Imon: 0.001 A Status: Off
+2.5V/MG10 Slot: 1 (A1518B) Channel:2 Vmon: 0 V Imon: 0.015 A Status: Off
+2.5v/MG9 Slot: 1 (A1518B) Channel:1 Vmon: 0 V Imon: 0.011 A Status: Off
+2.5v/mg1 Slot: 4 (A1518B) Channel:2 Vmon: 2.5 V Imon: 1.265 A Status: On
+2.5v/mg11 Slot: 3 (A1518B) Channel:2 Vmon: 2.49 V Imon: 1.196 A Status: On
+2.5v/mg3 Slot: 3 (A1518B) Channel:0 Vmon: 2.49 V Imon: 1.241 A Status: On
+2.5v/mg4 Slot: 4 (A1518B) Channel:1 Vmon: 2.49 V Imon: 1.24 A Status: On
+2.5v/mg5 Slot: 3 (A1518B) Channel:1 Vmon: 2.49 V Imon: 1.253 A Status: On
+2.5v/mg7 Slot: 4 (A1518B) Channel:0 Vmon: 2.49 V Imon: 1.269 A Status: On
+2.5v/t1 Slot: 0 (A1518B) Channel:0 Vmon: 0 V Imon: 0.007 A Status: Off
+2.5v/t2 Slot: 0 (A1518B) Channel:1 Vmon: 0 V Imon: 0.006 A Status: Off
+2.5v/t3 Slot: 0 (A1518B) Channel:2 Vmon: 0 V Imon: 0 A Status: Off
+2.5v/t4 Slot: 1 (A1518B) Channel:0 Vmon: 0 V Imon: 0.011 A Status: Off
+3.3v/mg Slot: 5 (A1516B) Channel:2 Vmon: 3.29 V Imon: 0.972 A Status: On
+3.3v/t14mg Slot: 2 (A1516 ) Channel:2 Vmon: 0.03 V Imon: 0 A Status: Off
+5v/mg3511 Slot: 5 (A1516B) Channel:3 Vmon: 5 V Imon: 0.546 A Status: On
+5v/mg741 Slot: 5 (A1516B) Channel:4 Vmon: 5 V Imon: 0.555 A Status: On
+5v/t123 Slot: 2 (A1516 ) Channel:3 Vmon: 0.02 V Imon: 0.001 A Status: Off
+5v/t4mg Slot: 2 (A1516 ) Channel:4 Vmon: 0 V Imon: 0.001 A Status: Off
-2.5V/MG10 Slot: 1 (A1518B) Channel:5 Vmon: 0 V Imon: 0.01 A Status: Off
-2.5V/MG9 Slot: 1 (A1518B) Channel:4 Vmon: 0 V Imon: 0 A Status: Off
-2.5v/mg1 Slot: 4 (A1518B) Channel:5 Vmon: 2.49 V Imon: 1.797 A Status: On
-2.5v/mg11 Slot: 3 (A1518B) Channel:5 Vmon: 2.48 V Imon: 1.786 A Status: On
-2.5v/mg3 Slot: 3 (A1518B) Channel:3 Vmon: 2.49 V Imon: 1.782 A Status: On
-2.5v/mg4 Slot: 4 (A1518B) Channel:4 Vmon: 2.49 V Imon: 1.781 A Status: On
-2.5v/mg5 Slot: 3 (A1518B) Channel:4 Vmon: 2.49 V Imon: 1.807 A Status: On
-2.5v/mg7 Slot: 4 (A1518B) Channel:3 Vmon: 2.5 V Imon: 1.805 A Status: On
-2.5v/t1 Slot: 0 (A1518B) Channel:3 Vmon: 0 V Imon: 0 A Status: Off
-2.5v/t2 Slot: 0 (A1518B) Channel:4 Vmon: 0 V Imon: 0 A Status: Off
-2.5v/t3 Slot: 0 (A1518B) Channel:5 Vmon: 0 V Imon: 0.006 A Status: Off
-2.5v/t4 Slot: 1 (A1518B) Channel:3 Vmon: 0 V Imon: 0.007 A Status: Off
-5v/mg3511 Slot: 5 (A1516B) Channel:0 Vmon: 4.99 V Imon: 0.357 A Status: On
-5v/mg741 Slot: 5 (A1516B) Channel:1 Vmon: 5 V Imon: 0.345 A Status: On
-5v/t123 Slot: 2 (A1516 ) Channel:0 Vmon: 0 V Imon: 0.002 A Status: Off
-5v/t4mg Slot: 2 (A1516 ) Channel:1 Vmon: 0.01 V Imon: 0 A Status: Off
CsI/t1 Slot: 12 (A1837 ) Channel:0 Vmon: 0 V Imon: 0 uA Status: Off
CsI/t2 Slot: 12 (A1837 ) Channel:2 Vmon: 0 V Imon: 0 uA Status: Off
CsI/t3 Slot: 12 (A1837 ) Channel:4 Vmon: 0 V Imon: 0 uA Status: Off
CsI/t4 Slot: 12 (A1837 ) Channel:6 Vmon: 0 V Imon: 0 uA Status: Off
CsI/t5 Slot: 13 (A1837 ) Channel:0 Vmon: 0 V Imon: 0 uA Status: Off
CsI/t6 Slot: 13 (A1837 ) Channel:2 Vmon: 0 V Imon: 0 uA Status: Off
CsI/t7 Slot: 13 (A1837 ) Channel:4 Vmon: 0.02 V Imon: 0 uA Status: Off
CsI/t8 Slot: 13 (A1837 ) Channel:6 Vmon: 0 V Imon: 0 uA Status: Off
DSSD/t1 Slot: 12 (A1837 ) Channel:1 Vmon: 0 V Imon: 0 uA Status: Off
DSSD/t2 Slot: 12 (A1837 ) Channel:3 Vmon: 0 V Imon: 0 uA Status: Off
DSSD/t3 Slot: 12 (A1837 ) Channel:5 Vmon: 0 V Imon: 0 uA Status: Off
DSSD/t4 Slot: 12 (A1837 ) Channel:7 Vmon: 0 V Imon: 0 uA Status: Off
MG11A Slot: 13 (A1837 ) Channel:5 Vmon: 79.92 V Imon: 0.2 uA Status: On
MG1T Slot: 13 (A1837 ) Channel:11 Vmon: 139.84 V Imon: 0.7 uA Status: On
MG2T Slot: 12 (A1837 ) Channel:10 Vmon: 80.06 V Imon: 2.76 uA Status: On
MG3T Slot: 13 (A1837 ) Channel:1 Vmon: 159.98 V Imon: 0.5 uA Status: On
MG4T Slot: 13 (A1837 ) Channel:9 Vmon: 95.12 V Imon: 0.8 uA Status: On
MG5T Slot: 13 (A1837 ) Channel:3 Vmon: 149.96 V Imon: 1 uA Status: On
MG6T Slot: 12 (A1837 ) Channel:11 Vmon: 80.02 V Imon: 1.12 uA Status: On
MG7T Slot: 13 (A1837 ) Channel:7 Vmon: 120 V Imon: 1.2 uA Status: On
MG9C_MUST2 Slot: 12 (A1837 ) Channel:9 Vmon: 0 V Imon: 0 uA Status: Off
spare1 Slot: 12 (A1837 ) Channel:8 Vmon: 0 V Imon: 0 uA Status: Off
spare3 Slot: 13 (A1837 ) Channel:8 Vmon: 0 V Imon: 0 uA Status: Off
spare4 Slot: 13 (A1837 ) Channel:10 Vmon: 0 V Imon: 0 uA Status: Off
|
| Fixed | TEST |
Sat Feb 29 16:16:52 2020 |
OttoH.V. | OTHER | Hardware | N/A | HVM_SUMMARY |
*** hvm watcher summary ***
Slot: 8 (A1821H) Channel:1 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL00 Slot: 9 (A1821H) Channel:0 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL01 Slot: 9 (A1821H) Channel:1 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL02 Slot: 9 (A1821H) Channel:2 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL03 Slot: 9 (A1821H) Channel:3 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL04 Slot: 9 (A1821H) Channel:4 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL05 Slot: 9 (A1821H) Channel:5 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL06 Slot: 9 (A1821H) Channel:6 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL07 Slot: 9 (A1821H) Channel:7 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL08 Slot: 9 (A1821H) Channel:8 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL09 Slot: 9 (A1821H) Channel:9 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL10 Slot: 9 (A1821H) Channel:10 Vmon: 0 V Imon: 0 uA Status: Off
CHANNEL11 Slot: 9 (A1821H) Channel:11 Vmon: 0 V Imon: 0 uA Status: Off
FP_CATS0 Slot: 2 (A1821HMP) Channel:6 Vmon: 729.75 V Imon: 0.727 uA Status: On
FP_CATS1 Slot: 2 (A1821HMP) Channel:7 Vmon: 639.75 V Imon: 0.004 uA Status: On
FP_CATS2 Slot: 2 (A1821HMP) Channel:8 Vmon: 649.75 V Imon: 0.006 uA Status: On
FP_CATS3 Slot: 2 (A1821HMP) Channel:9 Vmon: 649.75 V Imon: 0.018 uA Status: On
FP_CATS4 Slot: 2 (A1821HMP) Channel:10 Vmon: 664.5 V Imon: 0.16 uA Status: On
FP_CATS5 Slot: 2 (A1821HMP) Channel:11 Vmon: 649.5 V Imon: 0.04 uA Status: On
FP_DC1_cat Slot: 3 (A1821HM) Channel:0 Vmon: 0 V Imon: 0 uA Status: Off
FP_DC2_cat Slot: 3 (A1821HM) Channel:1 Vmon: 0 V Imon: 0 uA Status: Off
FP_DC_Wi1 Slot: 6 (A1821H) Channel:0 Vmon: 0 V Imon: 0 uA Status: Off
FP_DC_Wi2 Slot: 6 (A1821H) Channel:1 Vmon: 0 V Imon: 0 uA Status: Off
FP_DC_Wi3 Slot: 6 (A1821H) Channel:2 Vmon: 0 V Imon: 0 uA Status: Off
FP_DC_Wi4 Slot: 6 (A1821H) Channel:3 Vmon: 0 V Imon: 0 uA Status: Off
FP_IC_Cath Slot: 10 (AG5262) Channel:0 Vmon: 7 V Imon: 0.02 uA Status: Off
FP_IC_PAD Slot: 7 (A1821H) Channel:1 Vmon: 0 V Imon: 0 uA Status: Off
FP_IC_Wi Slot: 7 (A1821H) Channel:0 Vmon: 0 V Imon: 0 uA Status: Off
FP_IC_casq Slot: 10 (AG5262) Channel:1 Vmon: 5 V Imon: 0.02 uA Status: Off
FP_diamond Slot: 8 (A1821H) Channel:0 Vmon: 0 V Imon: 0.001 uA Status: Off
FP_mob_pla Slot: 5 (A18332) Channel:0 Vmon: 0 V Imon: 0 uA Status: Off
Si1 Slot: 8 (A1821H) Channel:5 Vmon: 0 V Imon: 0 uA Status: Off
Si2 Slot: 8 (A1821H) Channel:6 Vmon: 0 V Imon: 0 uA Status: Off
Si3 Slot: 8 (A1821H) Channel:7 Vmon: 0 V Imon: 0 uA Status: Off
Si4 Slot: 8 (A1821H) Channel:8 Vmon: 0 V Imon: 0 uA Status: Off
Si5 Slot: 8 (A1821H) Channel:9 Vmon: 0 V Imon: 0 uA Status: Off
Si6 Slot: 8 (A1821H) Channel:10 Vmon: 0 V Imon: 0 uA Status: Off
Si7 Slot: 8 (A1821H) Channel:11 Vmon: 0 V Imon: 0 uA Status: Off
TP_DC1 Slot: 3 (A1821HM) Channel:6 Vmon: 0.5 V Imon: 0.02 uA Status: Off
TP_DC2 Slot: 3 (A1821HM) Channel:7 Vmon: 0.25 V Imon: 0 uA Status: Off
x Slot: 7 (A1821H) Channel:11 Vmon: 0 V Imon: 0 uA Status: Off
|
| Ongoing | e775s |
Sat Feb 29 17:18:02 2020 |
mugast ; Valerian, Marlène , Pierre | OFFLINE | Software | CD2-Au | Issues in the EX reconstruction |
| mugast ; Valerian wrote: |
| mugast ; Valerian wrote: |
| mugast ; valerian irene wrote: | We are currently working on the EX reconstruction which is off for detector 1, 3 and 7... One of our guess might be that there is an issue with the position of the detectors which gives error in theta... As the energy calibration is ok. Joined are :
- the Excitation energy for good detectors compared to all detectors,
- the theoretical kinematic line for the 3.57 state for each detectors,
- the excitation energy as a function of the laboratory angle (for this last spectra a clear dependency is visible for telescopes 1,3 and 7)
- the 3D view, which doesn't show clear problem in position... |
Testing changing the beam impact :
-Kine for beam impact = (0,0,0) for reference
-Kine for beam impact = (0,0,-5mm)
-Kine for beam impact = (0,0,+5mm)
-Ex vs ThetaLab for beam impact = (0,0,0) for reference
-Ex vs ThetaLab for beam impact = (0,0,-5mm)
-Ex vs ThetaLab for beam impact = (0,0,+5mm)
Red lines corresponds to Ex = 3.570 MeV and Ex = 4.070 MeV
To try to correct the problem i also offseted the beam in X and Y, but this doesn't solve the problem quite the opposite as it make the result worse for other detectors also... The fact that it is better at lower angle and worse at higher angle might mean that the detectors angles are tilted compared to the
surveyors measurments... I also tried to use the CAO positions for MG3 (see Detectors/mugast.detector) but it didn't solve the problem. |
By looking at the EnergyCalibrator.C, I saw that the extrapolation used to find the dead layer of aluminum is commented... This might be an answer to the problem... |
WE HAVE A SOLUTION!!! It seems that the order of the detectors in mugast.detector matters!! Now we start with a dummy MG8, then MG1, MG2, ... And everything is fine!! We think that is because it was taking the wrong calibration files (to be checked).
Joined are (for run 128,137,138,139,151,152,153):
-Ex vs ThetaLab
-Ex for all detectors
-Egamma vs Ex |
| Attachment 1: ExvsTheta_each_detectorsOK.pdf
|
|
| Attachment 2: Ex_GOOD.pdf
|
|
| Attachment 3: EgvsEx_GOOD.pdf
|
|
| Fixed | e775s |
Sat Feb 29 17:50:47 2020 |
OttoRun | RUN | General | CD2-Au | Run164 |
*************************
Run : 164
*************************
Start at 2020-02-29 17:42:27.094034
VAMOS+AGATA+MUGAST
CD2+Au Target #2 (250-300ug + 20 umAu)
Trigger
* MG Annular
* MG Trapezoid
Beam intensity 4e+5
Restart in same conditions as run 152 after reloading RCC config and initializing
Pbm with AGATA |
| Fixed | e775s |
Sat Feb 29 18:08:41 2020 |
OttoRun | RUN | General | CD2-Au | Run165 |
*************************
Run : 165
*************************
Start at 2020-02-29 18:07:20.986327
VAMOS+AGATA+MUGAST
CD2+Au Target #2 (250-300ug + 20 umAu)
Trigger
* MG Annular
* MG Trapezoid
Beam intensity 4e+5
Restart in same conditions as run 152 after reloading RCC config and initializing
Pbm with AGATA on ATC13, we stopped the cluster and wait for debug later
Stop at 2020-03-01 00:21:02.566635
Stop comment: ZMQSpy borken link |
| Fixed | TEST |
Sat Feb 29 20:34:49 2020 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS1 Slot: 2 (A1821HMP) Channel:7 Vmon: 633.25 V Imon: 0.495 uA Status: OVER CURRENT
FP_CATS3 Slot: 2 (A1821HMP) Channel:9 Vmon: 646.5 V Imon: 0.246 uA Status: OVER CURRENT
|
| Fixed | TEST |
Sat Feb 29 21:52:14 2020 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS3 Slot: 2 (A1821HMP) Channel:9 Vmon: 631.25 V Imon: 0.998 uA Status: OVER CURRENT
FP_CATS4 Slot: 2 (A1821HMP) Channel:10 Vmon: 611.5 V Imon: 1.44 uA Status: OVER CURRENT
|
| Fixed | TEST |
Sat Feb 29 21:53:23 2020 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS3 Slot: 2 (A1821HMP) Channel:9 Vmon: 60 V Imon: 0 uA Status: INTERNAL TRIP
FP_CATS4 Slot: 2 (A1821HMP) Channel:10 Vmon: 57.5 V Imon: 0 uA Status: INTERNAL TRIP
|
| Fixed | TEST |
Sat Feb 29 22:41:02 2020 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS0 Slot: 2 (A1821HMP) Channel:6 Vmon: 720 V Imon: 0.96 uA Status: OVER CURRENT
FP_CATS1 Slot: 2 (A1821HMP) Channel:7 Vmon: 636.75 V Imon: 0.242 uA Status: OVER CURRENT
|
| Fixed | TEST |
Sat Feb 29 22:42:10 2020 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_CATS1 Slot: 2 (A1821HMP) Channel:7 Vmon: 50.5 V Imon: 0 uA Status: INTERNAL TRIP
FP_CATS3 Slot: 2 (A1821HMP) Channel:9 Vmon: 643.5 V Imon: 0.481 uA Status: OVER CURRENT
|
| Fixed | e775s |
Sun Mar 1 00:33:18 2020 |
OttoRun | RUN | General | CD2-Au | Run166 |
*************************
Run : 166
*************************
Start at 2020-03-01 00:23:26.889299
VAMOS+AGATA+MUGAST
CD2+Au Target #2 (250-300ug + 20 umAu)
Trigger
* MG Annular
* MG Trapezoid
Beam intensity 4e+5
Problem with ZMQSpy solved
Stop at 2020-03-01 04:22:14.420928
Stop comment: ZMQSpyr borken link |