| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Fixed | e738 |
Tue Jul 10 17:02:02 2018 |
jacques, daisuke, freddy, louis | RUN | General | Cryo-LH2 | RUN 332 |
12C primary: 1.7 uA
start: 16h52
stop: 17h52
Beam stop due to CSS2 power supply failure |
| Fixed | e738 |
Tue Jul 10 13:59:09 2018 |
jacques, daisuke, freddy | RUN | General | Cryo-LH2 | RUN 331 |
9C + liquid H
13h56 start. 12C 1.7 electric micro A.
16h51 stop |
| Fixed | e744 |
Thu May 24 01:10:30 2018 |
iuliqn | RUN | General | | run 433 Lise trigger |
| Should be ql foil in front of the si detector.... |
| Fixed | e744 |
Fri May 25 21:37:45 2018 |
iulian nicolas valérie | RUN | General | N/A | run 1012 all triggers 14O beam in D4 |
|
| Fixed | e744 |
Tue May 29 12:06:05 2018 |
iulian maurycy | OFFLINE | General | CH2 | Carbon substraction |
The scale factor for Carbon subtraction is 1.224. This means: RealCountsHidrogen=Counts CH2 - 1.224 * CountsCarbon
runs considered for the CH2 target
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2013_0.root
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2014_0.root
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2015_0.root
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2016_0.root
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2017_0.root
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2018_0.root
after the long interruption
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2101_0.root
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2102_0.root
run 2100 was not considered
runs considered for the Carbon subtraction:
after the long interruption
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2103_0.root
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2104_0.root
/home/e748/analysis/nptool/Projects/e744/conversion/rootdir/run_2105_0.root
the rest of runs was not considered |
| Fixed | |
Tue Feb 26 12:16:10 2019 |
iulian freddy francois | MUST2 | Software | N/A | run 41 Calimero run MUVI 1 sector1X |
Run 41
Calimero WORKS!! |
| Pinned | e744 |
Mon May 21 11:26:55 2018 |
iulian cristina | OTHER | Hardware | N/A | error stop run/ run still going |
| After stopping run 347, the narval looks like everything was stopped (blue ready), but I still had FAGs, VALs, and the leds on the GMT were blinking. MUVI was in ready state (leds green - red). |
| Fixed | e744 |
Mon May 21 11:42:16 2018 |
iulian cristina | MUST2 | Software | N/A | run 348 test comunication with Must. Pulser T1 channel 11 |
|
| Fixed | e744 |
Tue May 22 10:44:30 2018 |
iulian Fairouz Valerie | MUST2 | Software | N/A | Run #353 Calimero T1-T4 strips X |
Started run #353
Calimero T1-T4 strips X
Time Calibrator 320 ns ; period 20 ns |
| Fixed | e744 |
Tue May 22 12:09:27 2018 |
iulian Fairouz Valerie | MUST2 | Software | N/A | Run #354 Calimero T1-T4 strips X |
Started run #353
Calimero T1-T4 strips X
Time Calibrator 640 ns ; period 20 ns |
| Fixed | e744 |
Tue May 22 12:10:27 2018 |
iulian Fairouz Valerie | MUST2 | Software | N/A | Run #355 Calimero T1-T4 strips Y |
Started run #353
Calimero T1-T4 strips Y
Time Calibrator 640 ns ; period 20 ns |
| Fixed | e744 |
Tue May 1 10:47:41 2018 |
iulian & valerian | RUN | General | 60Co | run 189 60 Co source |
run #189 60co source EXL+PPT trigger
Changed the way of codding PPT. for this run ppt is coded with the QDC using first dynode.
Started @10h48 01/05
stopped @8H55 02/05 Francois |
| Fixed | e744 |
Thu May 10 15:06:44 2018 |
iulian & valerian | EXL-PPT | General | 60Co | Started run #211 & #212 #213 60Co source efficiency run |
Run #211 BAD Run no BT
60Co source efficiency run EXL & PPT trigger. Gains and thresholds set
start @15h05 10/05
stop @10h38 11/05
Run #212 BAD Run threshold changed
60Co source efficiency run EXL & PPT trigger. Gains and thresholds set
start @12h19 11/05
stop @13h14 11/05
Run #213
60Co source efficiency run EXL & PPT trigger. Gains and thresholds set
start @13h20 11/05
stop @8h20 12/05
QDCTDC_VOIE_0 -> PPT_E
This run used e744_12mai_founctione.das config (looks corrupted for must2 as no y energies) |
| Fixed | e744 |
Tue May 22 21:43:31 2018 |
iulian & megumi | MUST2 | Software | N/A | run 361 |
run 361
start 20h38
stop 21h41 |
| Fixed | e744 |
Tue May 22 21:57:51 2018 |
iulian & megumi | MUST2 | Software | N/A | Run #362 Calimero T1-T4 strips X again with solution |
Changed the Thresholds on T4. No longer double peaks...
I guess there is some noise on the T4 and he triggers on the noise from time to time => double peaks
Also T1-T3 have have strip 16 near pidestal who is counting a lot (red) |
| Pinned | e744 |
Tue May 22 23:42:02 2018 |
iulian & megumi | EXL-PPT | Software | N/A | Run #366 NARVAL FATAL ERROR |
RUN #366
EXL PPT triggers
Falat error from NARAVL
after the error, there is also following message,
____________
Level : WARN
Date : 23/05/2018 00:11:04
Logger : log from NARVAL.storer
Remote Info : localhost:41058
- - - - - - - - - -
Message :
Basic_Storer.Update_Files_Status : File name /data/e748X/e744/acquisition/run/run_0368.dat.22-05-18_23h46m25s already used.
____________
we change the run number to 400, and restart taking data
RUN #400
EXL PPT trigger
for chacking coincidence |
| Fixed | e744 |
Sun May 20 18:53:44 2018 |
iulian Jaromir Cristina | EXL-PPT | General | N/A | Run #347 Background run EXL & PPT triggers |
Run #347
Background run EXL & PPT triggers
start @18h53 20/05
stop @11h14 21/05 |
| Pending | |
Sat Apr 28 21:12:55 2018 |
iulian | MUST2 | General | 3-alpha | Run 182 end ; problem with cooling |
RUN 182 start @13h
Stoped @ 21H
3alpha run
Problem with cooling of M2 in M2C. Looks like the debit reduced in time: retour no longer as cold as entrance.
Removed the HVs but mantain cooling to test. |
| Fixed | e744 |
Mon Apr 30 20:38:21 2018 |
iulian | RUN | General | 3-alpha | 6run 186 3a source 60 co source |
run #186
start@11h 30/04
stop @ 20h40
trigger T1-T5+EXL+PPT |
| Fixed | e744 |
Mon Apr 30 20:42:34 2018 |
iulian | RUN | General | 60Co | run 188 60 co source |
run #188 60co source EXL+PPT trigger
Started @20h42 30/04
Stopped @10h37 01/05 |