Fixed, e744, Fri May 18 17:38:21 2018, Francois and Pedja, OTHER, Hardware, , translator nim to ecl 
|
There was a problem with the scalers, not all of them were working. After several tests, we changed the electronic module, from Lecroy ECl-NIM-ECL to module
LPC translator NIM-ECL. We checked all channels, they work. For a while channel N°4 was not working. We changed the nim cable, it works now. |
|
Pending, e744, Wed May 30 15:26:40 2018, Francois Marlete, BEAM, General, , problem with beam
|
| 14H00 : The primary beam was misaligned, they are still working on it. No 14O beam. |
|
Ongoing, e744, Wed May 16 09:49:26 2018, Francois & Ruxandra & Armel, BEAM, Hardware, , E1D6 and E2D6 detectors
|
After struggling with the noise, we achieved ~ 50 keV resolution.
Source = 1 alpha peak 241Am E=5.485 MeV
|
|
Fixed, e744, Mon May 28 12:22:42 2018, Francois & Marlete, OFFLINE, General, , superposition exp / theory for 15O and 15F
|
| |
|
Fixed, e744, Sun Apr 29 20:37:58 2018, Francois, CATS, General, , Chronogram
|
| |
|
Ongoing, e744, Mon May 14 12:57:44 2018, Francois, TARGET, General, , target preparation
|
Cibles Georges
|
|
Pending, e744, Tue May 22 19:40:26 2018, Francois, BEAM, General, , Planning of the experiment
|
| |
|
Pending, e744, Sat May 26 13:22:08 2018, Francois, BEAM, General, , problem with CSS1
|
There is a leakage of water in cavity north of cyclotron CSS1. I discussed with Alain Savale.
[B]There are 2 options:[/B]
|
|
Fixed, e744, Tue May 29 10:42:00 2018, Francois, BEAM, General, , effective beam time
|
In total, there were:
1.4 UT of 14O, average 2x10^5 pps
|
|
Fixed, e755, Sun Jun 24 09:48:46 2018, Francois, BEAM, General, , No beam
|
9H10: D5 stopped at 9H10. We asked for the beam.
9H48: Still no beam. There is a problem with the beam current limits set in the accelerator. They have to change it from 40 nAe between CO1 and CSS1 |
|
Fixed, e744, Tue May 29 02:01:58 2018, Franck, Valerian, Phil, RUN, General, Carbon, Run 2104 - Target 1 Carbon
|
Run 2104
Beam: 14O
Start @ 2:00 29 May 2018
|
|
Fixed, e744, Tue May 29 02:38:21 2018, Franck, Valerian, Phil, ONLINE, General, Carbon, Spectra and HV Start Run 2104 11x
|
| |
|
Fixed, e744, Tue May 29 04:08:52 2018, Franck, Valerian, Phil, RUN, General, Carbon, Run 2105 - Target 1 Carbon
|
Run 2105
Beam 14O
|
|
Ongoing, e744, Tue May 29 06:09:58 2018, Franck, Phil, RUN, General, Carbon, Run 2106 - Target 1 Carbon
|
Run 2106
Beam 14O (CATS: 1.4e5 pps)
|
|
Ongoing, e744, Tue May 29 07:39:53 2018, Franck, Phil, RUN, General, Carbon, Run 2107 - Restart after Reboot of VXI - Same problem
|
Low FAG rate: 30 /s
Low ORD rates: 0-10 /s, 15 /s on MM5 |
|
Fixed, e738, Wed Jul 11 09:32:37 2018, Franck, Jacques, Daisuke, RUN, General, Cryo-LH2, Run 342 10x
|
Wed 11 July 2018
Start @ 9:19
|
|
Ongoing, e738, Wed Jul 11 15:41:33 2018, Franck, Jacques, Daisuke, RUN, General, Cryo-LH2, Run 347
|
Run 347 Start 15:28 stop 17h17
e748 Exxx 3,6G 11 juil. 17:17 /data/e748X/e755/acquisition/run/run_0347.dat.11-07-18_15h28m32s
CATS thresholds lowered from 40 to 24 mV
|
|
Fixed, e738, Wed Jul 11 12:04:29 2018, Franck, Jacques + CATS Team, CATS, General, N/A, Run 343 - CATS2 pulser calibration
|
Start 11:53
Stop 11:59
|
|
Fixed, e748, Mon Jul 3 14:28:09 2017, Franck et Valérian, CHIO, Hardware, N/A, CHIO's electronic scheme
|
| A quick scheme of the CHIO electronic. The patch outputs are the one from the LISE acquisition room. |
|
Fixed, e748, Tue Jul 4 20:27:59 2017, Franck et Valérian, CHIO, Hardware, N/A, UPDATE : CHIO's electronic scheme (valid from run 217)
|
| Modification of the scheme to add the delay on the CHIO's logic signal for stop of the digitizer. |
|