Fixed, e748, Thu Jul 6 01:34:42 2017, e748, RUN, General, CD2, Run 331 (file change) 
|
1:25 file change -> run_0331.dat.05-07-17_18h45m44s.2
18O beam: 6.6 uAe
CATS1: 40000 cps
|
|
Fixed, e748, Thu Jul 6 03:35:32 2017, e748, RUN, General, CD2, Run 331 (file change)
|
3:30 file change -> run_0331.dat.05-07-17_18h45m44s.3
18O: 7.2 uAe
CATS1: 40000 cps
|
|
Fixed, e748, Thu Jul 6 05:48:26 2017, e748, MUST2, General, CD2, SiLi 1/T5 trip
|
Restart SiLi 1/T5 that reached 26 uA and tripped a few minutes ago.
Current = 21 uA when biased up again, and reaches 24 uA in a few minutes. |
|
Fixed, e748, Thu Jul 6 06:23:18 2017, e748, RUN, General, CD2, Run 331 (file change)
|
6:19 file change -> run_0331.dat.05-07-17_18h45m44s.4
18O 7.1 uAe
CATS1 : 36000 cps
|
|
Fixed, e748, Thu Jul 6 07:17:05 2017, e748, MUST2, General, CD2, SiLi 1/T5 trip
|
SiLi 1/T5 tripped at 7:16.
We turn it on again immediately -> 23 uA |
|
Fixed, e748, Thu Jul 6 07:23:22 2017, e748, MUST2, Software, CD2, MUST2 : VMECOM : TCP error - TCP/IP : time-out
|
"MUST2 : VMECOM : TCP error - TCP/IP : time-out" at 7:19.
RRC shows MUST2 "OFFLINE"
We stop run 331 -> Doesn't stop
|
|
Fixed, e748, Thu Jul 6 07:58:09 2017, e748, MUST2, General, CD2, SiLi 1/T5 triped
|
SiLi 1/T5 triped at 7:30. We leave it off while trying to restart the run control.
We turn it on again at 8:03. |
|
Fixed, e748, Thu Jul 6 13:33:23 2017, e748, RUN, General, CD2, Stop of Run 340 due to beam problems
|
The run 340 was stopped at 13h32. Before the stop fo the run the beam was unstable and stopped by machine team.
General DAQ e748
|
|
Fixed, e748, Fri Jul 7 00:25:16 2017, e748, MUST2, Software, CD2, Calibration for CsI
|
Rough energy calibration for CsI was performed (only for MM1 and MM4).
Calibration file is at
|
|
Fixed, e748, Fri Jul 7 08:17:38 2017, e748, RUN, General, CD2, Run 347
|
Stop run 346 and start run 347 after rewriting parameters onto CHIO digitizer.
Digitized CHIO signals back in Vigru.
|
|
Fixed, e748, Fri Jul 7 08:56:43 2017, e748, MUST2, General, CD2, SiLi 1/T5 current
|
SiLi 1/T5: 380V, 24.9 uA (current limit set at 26 uA)
Apparently, it hasn't triped since July 6, 10:35 |
|
Fixed, e748, Fri Jul 7 10:46:21 2017, e748, MUST2, General, CD2, SiLi 1/T5 current
|
HV = 380 V
I = 25.1 uA |
|
Fixed, e748, Fri Jul 7 10:56:12 2017, e748, RUN, General, CD2, Run 347 (file change)
|
10:50 data file change -> run_0347.dat.07-07-17_08h15m06s.1
18O: 7.5 uAe
CATS1 42 kcps
|
|
Fixed, e748, Fri Jul 7 12:00:29 2017, e748, RUN, General, CD2, Stop run 347 - Short machine problem
|
| Short beam interruption due to a machine problem. We stop run 347. |
|
Fixed, e748, Fri Jul 7 12:02:02 2017, e748, RUN, General, CD2, Run 348
|
Restart after short machine problem.
Same conditions as previous run.
|
|
Fixed, e748, Fri Jul 7 15:15:42 2017, e748, BEAM, General, CD2, Runs 349 to 364 - 10Be LISE tuning
|
Slits F31 = +/- 20 mm
Momentum acceptance = 2.5 % total |
|
Fixed, e748, Fri Jul 7 15:20:45 2017, e748, BEAM, General, CD2, Run 365 - 10Be LISE tuning
|
Slits F31 = +/- 4 mm
Momentum acceptance = 0.5 % total
2 uAe -> 80000 cps on CATS |
|
Fixed, e748, Fri Jul 7 15:55:29 2017, e748, BEAM, General, CD2, Run 366 - 10Be tuning - Centering on TARGET
|
FH31 slits = +/- 4 mm
DAC2 = -3 A |
|
Fixed, e748, Fri Jul 7 16:01:22 2017, e748, RUN, General, CD2, Run 367
|
FH31 slits (momentum slits) = +/- 4 mm
DAC2 = -3 A
Triggers = MUST2, CATS1div, CATS2div
|
|
Fixed, e748, Fri Jul 7 16:32:24 2017, e748, RUN, General, CD2, summary of runs 363-367
|
/data/e748X/e748/acquisition/run
r--r--r-- 1 e748 Exxx 19M 7 juil. 15:01 run_0363.dat.07-07-17_14h54m46s
|
|