- start GANP170

- login: .\invité | pass: ganil17

- start putty 

- select serial

- in host name type COM# (# is the number of the port which seems to be chosen at random at every reboot).

- when you have found the good port number, a terminal will appear, in this terminal you cannot erase, so if you type something wrong press enter.

- type :

           off

  the red LED of the front panel of one of the mesytech should stop, now, you know which mesytech is controlled by the terminal you opened.
- type:  
           on

  the red LED is back again and remote control is working again.

- to list the parameter type: 

           ds

- the parameter of interest are under "rc settings"