|
Fixed, e768s, Tue Jul 16 09:18:09 2019, OttoRun, RUN, General, N/A, Run27
|
*************************
Run : 27
*************************
Start at 2019-07-15 23:56:24.751783
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, e768s, Tue Jul 16 09:32:01 2019, OttoRun, RUN, General, N/A, Run21
|
*************************
Run : 21
*************************
Start at 2019-07-15 22:00:52.293258
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, e768s, Tue Jul 16 09:32:01 2019, OttoRun, RUN, General, N/A, Run25
|
*************************
Run : 25
*************************
Start at 2019-07-15 23:17:52.495715
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, e768s, Tue Jul 16 09:32:02 2019, OttoRun, RUN, General, N/A, Run19
|
*************************
Run : 19
*************************
Start at 2019-07-15 21:21:41.309961
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s
Stop at 2019-07-16 09:32:03.733557
Stop comment:
Stop at 2019-07-16 09:32:04.830799
Stop comment:
Stop at 2019-07-16 09:32:05.405129
Stop comment: |
|
Fixed, e768s, Tue Jul 16 09:32:06 2019, OttoRun, RUN, General, N/A, Run24
|
*************************
Run : 24
*************************
Start at 2019-07-15 22:58:34.115263
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s
Stop at 2019-07-16 09:32:07.900270
Stop comment:
Stop at 2019-07-16 09:32:08.186319
Stop comment:
Stop at 2019-07-16 09:32:08.404715
Stop comment:
Stop at 2019-07-16 09:32:08.595475
Stop comment:
Stop at 2019-07-16 09:32:08.836126
Stop comment:
Stop at 2019-07-16 09:32:09.032791
Stop comment: |
|
Fixed, e768s, Tue Jul 16 09:32:10 2019, OttoRun, RUN, General, N/A, Run26
|
*************************
Run : 26
*************************
Start at 2019-07-15 23:37:09.715822
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, e768s, Tue Jul 16 09:32:11 2019, OttoRun, RUN, General, N/A, Run23
|
*************************
Run : 23
*************************
Start at 2019-07-15 22:39:15.135130
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, e768s, Tue Jul 16 09:32:12 2019, OttoRun, RUN, General, N/A, Run20
|
*************************
Run : 20
*************************
Start at 2019-07-15 21:41:05.032091
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, e768s, Tue Jul 16 09:32:13 2019, OttoRun, RUN, General, N/A, Run18
|
*************************
Run : 18
*************************
Start at 2019-07-15 21:02:24.501987
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s
Stop at 2019-07-16 09:32:41.677146
Stop comment: |
|
Fixed, e768s, Tue Jul 16 09:32:13 2019, OttoRun, RUN, General, N/A, Run22
|
*************************
Run : 22
*************************
Start at 2019-07-15 22:19:49.102066
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
Fixed, e768s, Tue Jul 16 09:44:53 2019, Franco, RUN, General, 3-alpha, Run306 
|
Attached the calibrated spectra for Mugast and MUST2 for run 0306 and the raw spectra of Mugast.
| OttoRun wrote: | *************************
Run : 306
*************************
Start at 2019-07-12 17:17:19.657074
3 alpha calibration run
+ MM2 masks
+ suppressed pedestals (new pedestal for all trap detectors)
Square detectors:
+ MG10: not biased
+ MG9 removed
Stop at 2019-07-14 21:18:42.648096
Stop comment: stopping for heating cooling system after unbiasing MUGAST
Stop at 2019-07-15 15:36:28.594934
Stop comment: type your message here
Stop at 2019-07-15 16:25:22.582232
Stop comment: type your message here
Stop at 2019-07-15 18:02:50.677903
Stop comment: changing ADC channel for T_AGATA_HF |
|
|
Fixed, e768s, Tue Jul 16 09:51:56 2019, Franco, RUN, General, 3-alpha, Run301
|
Attached the dat file with the position of the pedestals for each strip of MG3_X
that can be used to correct the pedestal problem of MG3_X in later runs (from run O306).
| Franco wrote: | Attached the calibrated spectra for MUST2 and Mugast for run 301.
| OttoRun wrote: | *************************
Run : 301
*************************
Start at 2019-07-11 15:07:27.670320
3 alpha calibration run
+ without MM2 masks
+ non suppressed pedestals
Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked
Stop at 2019-07-11 16:52:55.206383
Stop comment: stopping run to put pedestal suppression |
|
|
|
Fixed, e744s, Tue Jul 16 11:21:26 2019, OttoTime, RUN, General, N/A, TimeCalibratorRun
|
*** Run Time Calibrator FSC ***
- Run: 144
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1, |
|
Fixed, e744s, Tue Jul 16 11:27:05 2019, OttoTime, RUN, General, N/A, TimeCalibratorRun
|
*** Run Time Calibrator FSC ***
- Run: 41
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1, |
|
Fixed, e768s, Tue Jul 16 11:27:23 2019, OttoRun, RUN, General, N/A, Run41
|
*************************
Run : 41
*************************
Start at 2019-07-16 11:27:07.354331
fsc / calibT run on each channel
Stop at 2019-07-16 11:28:43.118010
Stop comment: fail |
|
Fixed, e744s, Tue Jul 16 11:30:19 2019, OttoTime, RUN, General, N/A, TimeCalibratorRun
|
*** Run Time Calibrator FSC ***
- Run: 42
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1, |
|
Fixed, e768s, Tue Jul 16 11:30:47 2019, OttoRun, RUN, General, N/A, Run42
|
*************************
Run : 42
*************************
Start at 2019-07-16 11:30:38.017124
fsc / calibT run on each channel
Stop at 2019-07-16 11:33:11.684930
Stop comment: |
|
Fixed, e744s, Tue Jul 16 11:36:54 2019, OttoTime, RUN, General, N/A, TimeCalibratorRun
|
*** Run Time Calibrator FSC ***
- Run: 44
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1, |
|
Fixed, e768s, Tue Jul 16 11:37:12 2019, OttoRun, RUN, General, N/A, Run44
|
*************************
Run : 44
*************************
Start at 2019-07-16 11:37:04.972592
fsc / calibT run on each channel
BAD BAD
Stop at 2019-07-16 12:53:57.854101
Stop comment: |
|
Fixed, e744s, Tue Jul 16 11:39:33 2019, OttoTime, RUN, General, N/A, TimeCalibratorRun
|
*** Run Time Calibrator FSC ***
- Run: 44
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1, |
|