MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 94 of 132  Not logged in MUGAST
 Find |  Login 
 Full | Summary | Threaded | Show attachments  Show only new entries   2636 Entries 
Goto page Previous  1, 2, 3 ... 93, 94, 95 ... 130, 131, 132   Next  
Status ExpNbr Date Author Type Categorydown Target-Source Subject
Fixede768s Tue Jul 16 09:18:09 2019 OttoRunRUNGeneralN/ARun27
*************************
Run : 27
*************************

Start at 2019-07-15 23:56:24.751783

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:01 2019 OttoRunRUNGeneralN/ARun21
*************************
Run : 21
*************************

Start at 2019-07-15 22:00:52.293258

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:01 2019 OttoRunRUNGeneralN/ARun25
*************************
Run : 25
*************************

Start at 2019-07-15 23:17:52.495715

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:02 2019 OttoRunRUNGeneralN/ARun19
*************************
Run : 19
*************************

Start at 2019-07-15 21:21:41.309961

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s

Stop at 2019-07-16 09:32:03.733557
Stop comment:

Stop at 2019-07-16 09:32:04.830799
Stop comment:

Stop at 2019-07-16 09:32:05.405129
Stop comment:
Fixede768s Tue Jul 16 09:32:06 2019 OttoRunRUNGeneralN/ARun24
*************************
Run : 24
*************************

Start at 2019-07-15 22:58:34.115263

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s

Stop at 2019-07-16 09:32:07.900270
Stop comment:

Stop at 2019-07-16 09:32:08.186319
Stop comment:

Stop at 2019-07-16 09:32:08.404715
Stop comment:

Stop at 2019-07-16 09:32:08.595475
Stop comment:

Stop at 2019-07-16 09:32:08.836126
Stop comment:

Stop at 2019-07-16 09:32:09.032791
Stop comment:
Fixede768s Tue Jul 16 09:32:10 2019 OttoRunRUNGeneralN/ARun26
*************************
Run : 26
*************************

Start at 2019-07-15 23:37:09.715822

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:11 2019 OttoRunRUNGeneralN/ARun23
*************************
Run : 23
*************************

Start at 2019-07-15 22:39:15.135130

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:12 2019 OttoRunRUNGeneralN/ARun20
*************************
Run : 20
*************************

Start at 2019-07-15 21:41:05.032091

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:13 2019 OttoRunRUNGeneralN/ARun18
*************************
Run : 18
*************************

Start at 2019-07-15 21:02:24.501987

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s

Stop at 2019-07-16 09:32:41.677146
Stop comment:
Fixede768s Tue Jul 16 09:32:13 2019 OttoRunRUNGeneralN/ARun22
*************************
Run : 22
*************************

Start at 2019-07-15 22:19:49.102066

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:44:53 2019 FrancoRUNGeneral3-alphaRun306
Attached the calibrated spectra for Mugast and MUST2 for run 0306 and the raw spectra of Mugast.


OttoRun wrote:
*************************
Run : 306
*************************

Start at 2019-07-12 17:17:19.657074

3 alpha calibration run
+ MM2 masks
+ suppressed pedestals (new pedestal for all trap detectors)

Square detectors:
+ MG10: not biased
+ MG9 removed

Stop at 2019-07-14 21:18:42.648096
Stop comment: stopping for heating cooling system after unbiasing MUGAST

Stop at 2019-07-15 15:36:28.594934
Stop comment: type your message here

Stop at 2019-07-15 16:25:22.582232
Stop comment: type your message here

Stop at 2019-07-15 18:02:50.677903
Stop comment: changing ADC channel for T_AGATA_HF
Fixede768s Tue Jul 16 09:51:56 2019 FrancoRUNGeneral3-alphaRun301
Attached the dat file with the position of the pedestals for each strip of MG3_X
that can be used to correct the pedestal problem of MG3_X in later runs (from run O306).



Franco wrote:
Attached the calibrated spectra for MUST2 and Mugast for run 301.


OttoRun wrote:
*************************
Run : 301
*************************

Start at 2019-07-11 15:07:27.670320

3 alpha calibration run
+ without MM2 masks
+ non suppressed pedestals

Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked

Stop at 2019-07-11 16:52:55.206383
Stop comment: stopping run to put pedestal suppression
Fixede744s Tue Jul 16 11:21:26 2019 OttoTimeRUNGeneralN/ATimeCalibratorRun
*** Run Time Calibrator FSC ***
- Run: 144
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1,
Fixede744s Tue Jul 16 11:27:05 2019 OttoTimeRUNGeneralN/ATimeCalibratorRun
*** Run Time Calibrator FSC ***
- Run: 41
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1,
Fixede768s Tue Jul 16 11:27:23 2019 OttoRunRUNGeneralN/ARun41
*************************
Run : 41
*************************

Start at 2019-07-16 11:27:07.354331

fsc / calibT run on each channel

Stop at 2019-07-16 11:28:43.118010
Stop comment: fail
Fixede744s Tue Jul 16 11:30:19 2019 OttoTimeRUNGeneralN/ATimeCalibratorRun
*** Run Time Calibrator FSC ***
- Run: 42
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1,
Fixede768s Tue Jul 16 11:30:47 2019 OttoRunRUNGeneralN/ARun42
*************************
Run : 42
*************************

Start at 2019-07-16 11:30:38.017124

fsc / calibT run on each channel

Stop at 2019-07-16 11:33:11.684930
Stop comment:
Fixede744s Tue Jul 16 11:36:54 2019 OttoTimeRUNGeneralN/ATimeCalibratorRun
*** Run Time Calibrator FSC ***
- Run: 44
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1,
Fixede768s Tue Jul 16 11:37:12 2019 OttoRunRUNGeneralN/ARun44
*************************
Run : 44
*************************

Start at 2019-07-16 11:37:04.972592

fsc / calibT run on each channel





BAD BAD

Stop at 2019-07-16 12:53:57.854101
Stop comment:
Fixede744s Tue Jul 16 11:39:33 2019 OttoTimeRUNGeneralN/ATimeCalibratorRun
*** Run Time Calibrator FSC ***
- Run: 44
- MUVI: MUVI1
- Side : MUFEE X (Junction)
- Telescope: 1,
Goto page Previous  1, 2, 3 ... 93, 94, 95 ... 130, 131, 132   Next  

ELOG Home Page