MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 80 of 132  Not logged in MUGAST
Fixed, e744s, Tue Apr 16 03:55:38 2019, louis, Guiseppe, ONLINE, General, CH2, Log and scalers RUN 132 @4:00 19x
Internal trip at 3:37...fixed
Fixed, e744s, Tue Apr 16 05:53:00 2019, louis, Guiseppe, ONLINE, General, CH2, Log and scalers RUN 132 @6:00 19x
Over-current on CATS2 is quite frequent. Clean spectra at 6:00
Fixed, e744s, Tue Apr 16 07:53:16 2019, louis, Guiseppe, ONLINE, General, CH2, Log and scalers RUN 132 @8:00 19x
Fixed, e744s, Tue Apr 16 11:01:04 2019, Marlène, RUN, General, , statistics on each target 
Cumulated statistics (evaluated from CATS trigger) on each target is :
-target #3 : 7.547e5 (x 30000)
-target #5 : 2.02e5 (x30000)

Up to now we have 3.7 time more with target #3 than target #5.
Fixed, e744s, Tue Apr 16 11:35:28 2019, OttoRun, RUN, General, CH2, Run133 
*************************
Run : 133
*************************

Start at 2019-04-16 11:34:45.698105


Run Conditions:

Operator: Dieter, Marion, Beyhan, Kseniia
Trigger: MUGAST + Vamos %1000 + CATS %30000
Target #4 (C)
Beam: 14O
Intensity: ~2e4 with the pepperpot in.
Brho = 0.5807 Tm
CATS2 in
Finger at +13 mm
WITH AGATA


Comment:
Vamos setting for Carbon.
Stop at 2019-04-16 11:44:43.708450
Stop comment:
Fixed, e744s, Tue Apr 16 11:44:10 2019, Marion, Dieter, TARGET, General, Carbon, Run 133. Carbon target in 60 microns. Setting up. 
Fixed, e744s, Tue Apr 16 12:10:05 2019, OttoRun, RUN, General, CH2, Run134 
*************************
Run : 134
*************************

Start at 2019-04-16 11:48:58.245193

*************************
Run : 134
*************************


Run Conditions:

Operator: Marion, Beyhan, Dieter, Kseniia
Trigger: MUGAST + Vamos %1000 + CATS %30000
Target #4 (C)
Beam: 14O
Intensity: ~2e4 increased to ~1e5 during run
Brho = 0.5807 Tm
CATS2 in
Finger at +500 mm
WITH AGATA


Comment:

Stop at 2019-04-16 20:18:39.131994
Stop comment: end of run 134 to change target to the thin CH2

Stop at 2019-04-16 20:51:59.202506
Stop comment: end of run135 to increase the beam to 2.e5pps

Stop at 2019-04-17 06:51:43.430562
Stop comment: run stop because CSS2 was out - end of experiment
Documents, e744s, Tue Apr 16 12:15:28 2019, Beyhan, OTHER, General, , VAMOS settings for C run 
Fixed, e744s, Tue Apr 16 12:44:22 2019, Marion, Dieter, BEAM, General, Carbon, ventilation problem CSS2 12:43  run134_scaler_afterbeamrestart_13h26.png
ventilation problem CSS2 12:43

Beam back at 13h24 (see scaler attached)
Fixed, e744s, Tue Apr 16 14:13:17 2019, Freddy, RUN, General, CH2, Log and scalers RUN 134 @ 14h13 18x
Fixed, e744s, Tue Apr 16 14:20:17 2019, mugast, VAMOS, General, CH2, FP_DC2_w HV run134_DC2w_580V.pngrun134_XfTf.pngrun134_DC3XY.png
Still tripping....

Decreased HV from 600 to 580V - attached are the new spectra
Fixed, e744s, Tue Apr 16 14:37:04 2019, Marion, BEAM, General, Carbon, Beam above 1.4*10**4 on cats asked to come down to ~1.1*10**5 
Fixed, e744s, Tue Apr 16 15:33:26 2019, beyhan, marion, dieter, VAMOS, General, , VAMOS settings fo C run IMG_1643.jpg
Fixed, e744s, Tue Apr 16 17:51:33 2019, Fairouz & Marlène, RUN, General, Carbon, Log and scalers RUN 134 @ 17h52 20x
Fixed, e744s, Tue Apr 16 18:03:26 2019, Faïrouz & marlène, RUN, General, Carbon, Beam stopped at 18h00  
Arrêt faisceau pour cause de bobine du cyclotron off
Fixed, e744s, Tue Apr 16 18:28:27 2019, Faïrouz & marlène, RUN, General, Carbon, Beam back at 18:28 
Beam is back at 18h28
Intensity: 10e5 pps
Fixed, e744s, Tue Apr 16 19:50:20 2019, iulian valerian francois sylvan , OTHER, General, N/A, todo list after beam time 
0) Heating the electronics of MUGAST
1) Calibration 3a with pedestals (10 min)
2) Calibration 3a 24 h
2b) Make the electronics drawing (with a lot of pictures). Include TAC ranges and measure delays
3) Calimero (time calibration of MUGAST)
4) TAC calibration (MUGAST + VAMOS)
5) Vamos ?!
Fixed, e744s, Tue Apr 16 19:55:05 2019, Faïrouz & Jaromir, RUN, General, Carbon, Log and scalers RUN 134 @ 19h55 20x
Fixed, e744s, Tue Apr 16 20:42:35 2019, Faïrouz & & Julian & Jaromir, RUN, General, CH2, Run 135 started (Change of the finger position during the run) 
automatic logger didnt work ... this is a manual entry:


*************************
Run : 135
*************************

Start at 2019-04-16 ~ 20:36

*************************
Run : 135
*************************


Run Conditions:

Operator: Faïrouz & & Julian & Jaromir
Trigger: MUGAST + Vamos %1000 + CATS %30000
Target #5 (CH2) thin
Beam: 14O
Intensity: ~1.5e4 will increase during the run
Brho = 0.550875 Tm as in run 125
CATS2 in
Finger at +13 mm
WITH AGATA



Comment: automatic logger didnt work
Fixed, e744s, Tue Apr 16 20:58:40 2019, Faïrouz, Julian, Jaromir & Sylvain, RUN, General, CH2, Run 136 started 

Comment: automatic logger didnt work

*************************
Run : 136
*************************

Start at 2019-04-16 ~ 20:56

*************************
Run : 136
*************************


Run Conditions:

Operator: Faïrouz & Julian & Jaromir & Sylvain
Trigger: MUGAST + Vamos %1000 + CATS %30000
Target #5 (CH2) thin
Beam: 14O
Intensity: ~2.0e5
Brho = 0.550875 Tm
CATS2 in
Finger at +16 mm
WITH AGATA

ELOG Home Page