MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 74 of 132  Not logged in MUGAST
Status ExpNbr Date Author Type Categorydown Target-Source Subject
Fixede744s Fri Apr 12 01:37:24 2019 OttoRunRUNGeneralEmptyRun85
*************************
Run : 85
*************************

Start at 2019-04-12 01:37:03.553133

Run Conditions:
  • Operator: Adrien
  • Trigger: VAMOS %1
  • Target/Source: hole target 1
  • Beam: 14O
  • Intensity: ~ 4e+4
  • Brho = 0.69186 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Aligning beam in VAMOS, restart after crash of the aquisition
Fixede744s Fri Apr 12 01:50:50 2019 OttoRunRUNGeneralEmptyRun86
*************************
Run : 86
*************************

Start at 2019-04-12 01:49:22.775057

Run Conditions:
  • Operator: Jenn
  • Trigger: VAMOS %1
  • Target/Source: hole target 1
  • Beam: 14O
  • Intensity: ~ 4e+4
  • Brho = 0.6912 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start CATS and target 1 hole

Stop at 2019-04-12 01:59:01.799964
Stop comment: type your message here
Fixede744s Fri Apr 12 01:56:35 2019 Jenn, Louis, Cyril,Daniele and ChloeBEAMGeneralEmptyBrho for the new 14O setting RUN86
CATS2 on and target position 1: hole
Beam intensity in CATS: 4E4
VAMOS intensity 1.3E4

CATS2 off and target position 1 = hole
Beam intensity in VAMOS = 4e4 pps (~100% transmission)
Fixed  Fri Apr 12 02:05:34 2019 François, Chloé TARGETGeneral Target change
Changed from Target 1 hole to Target 2 (104microns).
Fixede744s Fri Apr 12 02:23:57 2019 OttoRunRUNGeneralCH2Run87: First physics run of 14O
*************************
Run : 87
*************************

Start at 2019-04-12 02:20:23.557408

Run Conditions:
  • Operator: Jenn
  • Trigger: MG Backward, MG90, MUST2, CATS %1000 AGATA %100
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: ~ 4e+4
  • Brho = 0.6912 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is closed.

Stop at 2019-04-12 06:23:53.544073
Stop comment: type your message here
Fixede744s Fri Apr 12 06:24:31 2019 OttoRunRUNGeneralCH2Run88
========================================
*************************
Run : 88
*************************

Start at 2019-04-12 06:24:07.821497

Run Conditions:
  • Operator: Louis
  • Trigger: MG Backward, MG90, MUST2, CATS %1000 AGATA %100
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: ~ 3e+4
  • Brho = 0.6912 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is closed.

Stop at 2019-04-12 08:37:19.321598
Stop comment: Stop to setup VAMOS
Fixede744s Fri Apr 12 06:51:59 2019 LouisBEAMGeneralN/ABrho and energy of the 14O beam
Fixede744s Fri Apr 12 07:26:29 2019 iulianRUNGeneralCH2Run88
Please add all the spectra from the visualization into the elog and all the scales.... see runs before



OttoRun wrote:
*************************
Run : 88
*************************

Start at 2019-04-12 06:24:07.821497

Run Conditions:
  • Operator: Louis
  • Trigger: MG Backward, MG90, MUST2, CATS %1000 AGATA %100
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: ~ 3e+4
  • Brho = 0.6912 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is closed.
Fixede744s Fri Apr 12 08:01:12 2019 valerianRUNGeneralCH2run 88 screenshots
Fixede744s Fri Apr 12 08:19:31 2019 MarlèneOFFLINEGeneral CATS profiles RUN87
Fixede744s Fri Apr 12 09:01:28 2019 OttoRunRUNGeneralCH2Run90
*************************
Run : 90
*************************

Start at 2019-04-12 09:00:41.342650

Run Conditions:
  • Operator: Louis
  • Trigger: MVAMOS
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Stop at 2019-04-12 09:05:00.469744
Stop comment: STop due TO ganlx7 crash TCP.Error on VAMOS_VME Entering to reboot CPU
Fixede744s Fri Apr 12 09:12:52 2019 OttoRunRUNGeneralCH2Run91
*************************
Run : 91
*************************

Start at 2019-04-12 09:12:29.222765

Run Conditions:
  • Operator: Louis
  • Trigger: MVAMOS
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open
After rebboting ganlx7 (VAMOS_VME)

Stop at 2019-04-12 09:32:38.858638
Stop comment:
Fixede744s Fri Apr 12 09:25:10 2019 MarlèneONLINEGeneral TAC
Fixede744s Fri Apr 12 09:33:33 2019 OttoRunRUNGeneralCH2Run92
*************************
Run : 92
*************************

Start at 2019-04-12 09:33:19.869189

Run Conditions:
  • Operator: Louis
  • Trigger: MUST2
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open
After rebboting ganlx7 (VAMOS_VME)

Stop at 2019-04-12 09:37:30.065218
Stop comment: Start did not Start !
Fixede744s Fri Apr 12 09:37:43 2019 OttoRunRUNGeneralCH2Run93
*************************
Run : 93
*************************

Start at 2019-04-12 09:37:36.997465

Run Conditions:
  • Operator: Louis
  • Trigger: MUST2
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open
Fixede744s Fri Apr 12 09:41:38 2019 OttoRunRUNGeneralCH2Run94
*************************
Run : 94
*************************

Start at 2019-04-12 09:41:27.977232

Run Conditions:
  • Operator: Louis
  • Trigger: MUGAST + Vamos
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Stop at 2019-04-12 10:11:29.453680
Fixede744s Fri Apr 12 10:17:57 2019 OttoRunRUNGeneralCH2Run95
*************************
Run : 95
*************************

Start at 2019-04-12 10:09:45.911078

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

working inside G1

Stop at 2019-04-12 10:33:06.491018
Stop comment:
Fixede744s Fri Apr 12 10:36:09 2019 ValerianRUNGeneralN/AProcedure to follow during runs
At the beginning of a run :

  • Do screenshots of the scalers and add them to the elog.(Say it is at the beginning of the run)

During a run, one should :

  • Check regularly the scalers.
  • Look at the different pages on vigru.
  • Check if there are any problem concerning the Voltages, a window should be prompted to you if it is the case. If the window has FP written it is on the VAMOS side.
  • Do conversion, see corresponding entry (Or paper next to computer)
  • Check the last pending issues in the elog and if they are fixed, edit them to fix (any HV trip or over-current are pending and shoudl be switch to fix).

Every hours and before stopping the run:

  • Do screenshots of the scalers and add them to the elog.(Say at which time it is done)
  • Do screenshots of all the vigru pages of MUGAST and VAMOS and add them to the elog.
Fixede744s Fri Apr 12 10:37:03 2019 OttoRunRUNGeneralCH2Run96
*************************
Run : 96
*************************

Start at 2019-04-12 10:36:45.359601

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Timing Setting

Stop at 2019-04-12 11:16:49.078211
Stop comment: Entering Change Delay on T_FPMW_CATS2
Fixede744s Fri Apr 12 11:29:46 2019 OttoRunRUNGeneralCH2Run97
*************************
Run : 97
*************************

Start at 2019-04-12 11:29:03.948068

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Correct TAC T_FPMW_XXX FPMW Fifo Pb with 50 ohm terminator ...

Stop at 2019-04-12 11:45:25.662355
Stop comment: Entering to Set Vamos %100

ELOG Home Page