|
Fixed, TEST, Tue Feb 18 10:00:40 2020, mugast, RUN, General, 3-alpha, RUN 501 - missing info
|
RUN 501
alpha run with cooling during the night from 13-14/02/2020 |
Fixed, e775s, Mon Feb 24 17:14:57 2020, mugast, RUN, General, CD2, RUN 124 
|
*************************
Run : 124
*************************
|
|
Fixed, e775s, Tue Feb 25 15:09:58 2020, mugast, GRIT, General, , Screenshots run 131 6x
|
| |
|
Fixed, , Wed Feb 26 15:04:29 2020, mugast, RUN, General, , beam retuning
|
| Beam is retuned from PCP to improve its quality |
|
Fixed, e775s, Thu Feb 27 11:53:34 2020, mugast, RUN, General, , run 140
|
Start at 11h41 (Feb. 27th)
Stop at (Feb. 27th)
|
|
Fixed, e775s, Thu Feb 27 15:51:03 2020, mugast, RUN, General, , RUN 140
|
Target CD2 thin target
Beam intensity ~ 5e+5 pps
|
|
Fixed, e775s, Thu Feb 27 19:35:26 2020, mugast, RUN, General, CD2, Run 142 : beam stopped
|
Beam stopped at 19h20 : drift of beam line hit a neutron watcher in one of G1 neighboring rooms, radiosecurity
protocol started.
On call team must come : estimation beam back on in 30min.
|
|
Fixed, e775s, Fri Feb 28 08:26:37 2020, mugast, RUN, General, CD2, RUN142/143 MUGAST Spectra 8h30
|
| |
|
Fixed, e775s, Fri Feb 28 11:49:46 2020, mugast, RUN, General, CD2, RUN 142/143 preliminary analysis with gamma
|
| |
|
Ongoing, e775s, Sat Feb 29 03:26:52 2020, mugast, RUN, General, N/A, Continues RUN 153
|
Run 153 (target #2 CD2+Au)
Beam Intensity 4*10⁵
|
|
Fixed, e793s, Wed Mar 11 19:02:54 2020, mugast, GRIT, General, 3-alpha, Alpha calibration for e793s - run 600
|
========================================
========================================
========================================
|
|
Fixed, e793s, Wed Mar 11 22:01:18 2020, mugast, GRIT, General, 3-alpha, Alpha calibration - run 600
|
After 2h30' of run we checked the temperatures of the boards and we noticed that MG7 had 63 degrees on both X and Y, which is very high; MG9 was around
56 on X and 26 on Y. There might be a problem in the loop of the cooling system because the other detectors are pretty fine, with temperatures around 20-25
degrees.
|
|
Fixed, e793s, Thu Mar 12 17:25:19 2020, mugast, GRIT, General, 3-alpha, run 0601 - alpha source with pedestals
|
| Alpha source calibration run without pedestal suppression and cooling at 0 deg. |
|
, , Tue May 19 12:23:57 2020, mugast, ONLINE, , ,
|
| |
|
Fixed, e793s, Fri Feb 12 08:52:30 2021, mugast, RUN, General, 3-alpha, run 613: long alpha run
|
| all Muvi in trigger, mugast stand alone. all detector Bias on. |
|
Fixed, e793s, Fri Mar 5 16:16:28 2021, mugast, DAQ, Software, , Pedestals for E793S 12x
|
Pedestal alignment was performed for Energy qnd Time for all cards with cooling at 0°.
The values are attached here and saved in : cd ganacq_manip/mugast/das-save/pedestal-save/pedestal_5march2021_15h54/ |
|
Fixed, e793s, Fri Mar 5 17:01:27 2021, mugast, S1, Hardware, N/A, Giving up on S1
|
We mounted the new S1 detector from Surrey with a new custom cable on several MUFEE cards using the CsI ASICs.
We managed to put voltage on it and get decent leakage current.
We modified the DAS parameters from CsI values to Si values (gain, shaping time, etc).
|
|
Fixed, e793s, Mon Mar 8 17:21:14 2021, mugast, GRIT, General, N/A, Run631 - TACs calibration (part 1)
|
*************************
[SIZE=3][B]Run : 631[/B][/SIZE]
*************************
|
|
Fixed, e793s, Mon Mar 8 17:47:29 2021, mugast, GRIT, General, N/A, Run632 - TACs calibration (part 2)
|
TAC calibration.
VAMOS-CATS2 (range 2 us)
|
|
Fixed, e793s, Mon Mar 8 18:07:25 2021, mugast, GRIT, General, N/A, Run 633 - TACs calibration (part 3)
|
TAC calibration.
Mugast-CATS2 (range 1 us)
|
|