MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 6 of 132  Not logged in MUGAST
 Find |  Login 
 Full | Summary | Threaded | Show attachments  Show only new entries   2636 Entries 
Goto page Previous  1, 2, 3 ... 5, 6, 7 ... 130, 131, 132   Next  
Status ExpNbr Date Author Type Category Target-Source Subjectdown
Fixede793s Thu Mar 11 09:17:17 2021 Nicolas, Lynda, CharlieRUNGeneralCD2run 53 new screenshots
FixedTEST Mon Mar 4 15:30:31 2019 iulian Marlene & ValerianMUST2Hardware3-alpharun 51 3-alpha run with Pedestals Aligned @ 13 deg Measured on cooling system
RUN 51
3a run with Pedestals Aligned but not suppressed
FixedTEST Mon Mar 4 13:54:24 2019 iulian & ValerianGRITHardware3-alpharun 50 3-alpha short run
RUN 50
First 3a test with all Must2 detectors. HV on all set to 50 V for this test only to avoid any risks
FixedTEST Tue Feb 26 14:52:49 2019 iulian freddy GRITSoftwareN/Arun 44 Calimero run MUVI 2 on X sectors (bad run)
run #44 bad run
Calimero MUVI2 X

During the run we noticed that time calibrator is on MUVI1 only .
FixedTEST Tue Feb 26 13:50:36 2019 iulian freddy GRITSoftwareN/Arun 43 Calimero run MUVI 1 on Y sectors
run #43
Calimero MUVI1 Y
FixedTEST Tue Feb 26 13:21:32 2019 iulian freddy GRITSoftwareN/Arun 42 Calimero run MUVI 1 on X sectors
run #42
Calimero MUVI1 X


run #41
Calimero MUVI secttor 1X
FixedTEST Fri Feb 22 15:54:30 2019 iulian GRITHardware3-alpharun 40 3-alpha night run
Run 40
Alpha source run for trapezoid detectors during the night with pedestals aligned (with HV off) and zero suppression. Cooling at 15°C.
Thresholds at 500 keV.


On MUVI1
ChannelSpectra LabelDetectorVoltage
1 MG1 MG1 140V
2 MG3 MG3 160V
3 MG4 MG4 95V
4 MG5 MG5 150V



On MUVI2:
ChannelSpectra LabelDetectorVoltage
1 MG7 MG7 120V
2 MG9 MG1160V
3 MG10 -- --
4 MG11 -- --


TRIGGERS are:
GMT ch1 --> OR MUVI1
GMT ch2 --> OR MUVI2
GMT ch3 --> OR MUVI3 (nothing on it)

[S]Problem MG5?![/S]---> No real problem, just spectra definition on plot was incorrect
FixedTEST Fri Feb 22 11:56:53 2019 iulian GRITHardware3-alpharun 38 3-alpha with reordering of the MUGAST cables for the logic and analogic signals
Run 38
Alpha source run for trapezoid detectors during the night with pedestals aligned (with HV on) and zero suppression. Cooling at 15°C.
Thresholds at 500 keV.

Important:
The MUGAST signal cables (logic & analogic) have been reordered:

On MUVI1
ChannelSpectra LabelDetectorVoltage
1 MG1 MG1 140V
2 MG3 MG3 160V
3 MG4 MG4 95V
4 MG5 MG5 150V



On MUVI2:
ChannelSpectra LabelDetectorVoltage
1 MG7 MG7 120V
2 MG9 MG1160V
3 MG10 -- --
4 MG11 -- --


TRIGGERS are:
GMT ch1 --> OR MUVI1
GMT ch2 --> OR MUVI2
GMT ch3 --> OR MUVI3 (nothing on it)
FixedTEST Thu Feb 21 17:32:42 2019 iulian, freddyGRITHardware3-alpharun 33 3 alfa with MG1,MG3,MG4,MG5,MG7,MG9 short run
First test of the repaired 2xcables. The repaired cables were placed between MUVI1_2 <=> MG4 & MUVI1_4 <=>MG11 (longer cable)
Correspondance for the rest is the same as for run 30. The mapping is the same for all detectors (including anulaire detector).

Alpha source run for trapezoid detectors + anulaire detector with pedestals aligned and zero suppression. Cooling at 15°C.
Thresholds at 500 keV.

On MUVI1:

1--> MG5 (150V)
2--> MG4 (95V)
3--> MG3 (160V)
4--> MG11 (60V)

On MUVI2:
5--> MG7 (120V)
6--> MG1 (140V)
7--> --
8--> --

TRIGGERS are:
GMT ch1 --> OR MUVI1
GMT ch2 --> OR MUVI2
GMT ch3 --> OR MUVI3 (nothing on it)
Fixede768s Thu Aug 1 15:50:41 2019 OttoRun (ou pas)RUNGeneral3-alpharun 317
Run 317 no pedestal supp alpha run
Fixede768s Thu Aug 1 14:49:45 2019 Fairouz, Valerian NicolasRUNGeneralN/Arun 315 calib TACs
Fixede775s Thu Feb 27 11:53:34 2020 mugastRUNGeneral run 140
Start at 11h41 (Feb. 27th)
Stop at (Feb. 27th)

Beam: 19O
Intensity: 4e5 pps

Target; CD2 (350 ug/cm2, NO gold) #3
Fixede775s Thu Feb 27 10:03:03 2020 Nicolas, Sylvain, Antoine, AdrienRUNGeneral run 139 - minutes of what happened during the run
Here is a brief summary of what happened over the course of the run:

From beginning of run to 12 pm (February 27th)



Nicolas, Sylvain, Antoine, Adrien wrote:
Start at 09h50 (Feb. 27th)
Stop at

Beam: 19O
Intensity: 3e5 pps

Target; CD2 + Au #2
Fixede775s Thu Feb 27 09:56:19 2020 Nicolas, Sylvain, Antoine, AdrienRUNGeneral run 139 - analysis

Nicolas, Sylvain, Antoine, Adrien wrote:
Start at 09h50 (Feb. 27th)
Stop at

Beam: 19O
Intensity: 3e5 pps

Target; CD2 + Au #2
Fixede775s Thu Feb 27 09:56:39 2020 Nicolas, Sylvain, Antoine, AdrienRUNGeneral run 139 - Beam intensity time evolution

Nicolas, Sylvain, Antoine, Adrien wrote:
Start at 09h50 (Feb. 27th)
Stop at

Beam: 19O
Intensity: 3e5 pps

Target; CD2 + Au #2
Fixede775s Thu Feb 27 09:54:17 2020 Nicolas, Sylvain, Antoine, AdrienRUNGeneral run 139
Start at 09h50 (Feb. 27th)
Stop at

Beam: 19O
Intensity: 3e5 pps

Target; CD2 + Au #2
Fixede775s Thu Feb 27 11:51:34 2020 Nicolas Sylvain MarlèneRUNGeneral run 139
Start at 09h51 (Feb. 27th)
Stop at 11h22 (Feb. 27th)

Beam: 19O
Intensity: 3e5 pps

Target; CD2 + Au #2
Fixede775s Thu Feb 27 16:36:25 2020 Nicolas Sylvain MarlèneRUNGeneral run 139

Nicolas Sylvain Marlène wrote:
Start at 09h51 (Feb. 27th)
Stop at 11h22 (Feb. 27th)

Beam: 19O
Intensity: 3e5 pps

Target; CD2 + Au #2



temperature on MUFEE was checked to be between 0 and 12 degress depending on the boards.
The current of the detectors are stable.
Fixede775s Thu Feb 27 03:13:33 2020 Faïrouz, Chloé & MichalRUNGeneral run 138 screenshots1 at 03:13

Faïrouz, Chloé, Michal wrote:

Faïrouz, Chloé, Michal wrote:
Screen shots at 03:15 am

Beam: 19O
Intensity: 3.4e5 pps

Target; CD2 + Au #2
Fixede775s Wed Feb 26 21:57:05 2020 Nicolas, SylvainRUNGeneral run 138 screenshots1

Nicolas, Sylvain wrote:
Start at 15h45
Stop at

Beam: 19O
Intensity: 4e5 pps

Target; CD2 + Au #2
Goto page Previous  1, 2, 3 ... 5, 6, 7 ... 130, 131, 132   Next  

ELOG Home Page