|
Fixed, e744s, Tue Apr 16 11:44:10 2019, Marion, Dieter, TARGET, General, Carbon, Run 133. Carbon target in 60 microns. Setting up.
|
|
|
Fixed, com2019, Thu Apr 4 08:31:58 2019, mugast, RUN, General, N/A, Run 129
|
Run 129 overnight vamos calibration.
Multiple trip of FP_CATSXXX between and 5.09 and 6.35 |
Fixed, e744s, Mon Apr 15 09:36:01 2019, Nikola Marion Kseniia Damien Chloe Marlene Fairouz, RUN, General, CH2, Run 125 stopped 9:30 to go back to on-resonance config 
|
|
|
Fixed, e768s, Mon Jul 22 13:40:41 2019, Franck, ONLINE, General, LiF, Run 125 screenshots 22x
|
|
|
Fixed, e768s, Mon Jul 22 06:14:38 2019, Faïrouz & Sylvain, RUN, General, LiF, Run 122 with more centered beam profile
|
Even with a more centered beam profile, AGATA request triggers is increasing too much and too fast!!! after 5 mn run, we are already at 100khz!!!
Need Bertrand to solve the situation. |
|
Fixed, e768s, Mon Jul 22 02:07:44 2019, Faïrouz & Sylvain, BEAM, General, LiF, Run 121 : Beam profile
|
| Status at 2:05 AM |
|
Fixed, e768s, Sun Jul 21 11:49:59 2019, Christiqn qnd Didier, RUN, General, LiF, Run 119 screenshots
|
|
|
Fixed, e768s, Sat Jul 20 23:43:02 2019, mugast, RUN, General, LiF, Run 119 (Problem with VXI fixed for the moment)
|
Run 119.
Or-Vamos= 1430 ---> I=1.43x10^7 pps |
|
Fixed, e768s, Sat Jul 20 21:10:57 2019, Faïrouz & Sylvain, RUN, General, LiF, Run 118 stopped because VXI Vamos turned offline because of overheat
|
| Run 118 stopped because VXI Vamos turned offline of overheat |
|
Fixed, e768s, Sat Jul 20 19:12:58 2019, Faïrouz & Sylvain, RUN, General, LiF, Run 118 screenshots @ 19h14 20x
|
|
|
Fixed, e768s, Sat Jul 20 17:06:12 2019, mugast, RUN, General, LiF, Run 118 Scaler
|
| Start run 118 |
|
Fixed, e768s, Sat Jul 20 17:03:23 2019, mugast, RUN, General, LiF, Run 117 stopped
|
| Run 117 stopped because VAMOS VXI went offline |
|
Fixed, e768s, Fri Jul 19 17:15:46 2019, mugast, RUN, General, LiF, Run 116
|
|
|
Fixed, e793s, Thu Mar 12 14:54:13 2020, Marlène & Franco, GRIT, General, 3-alpha, Run 0601 - alpha source calibration
|
We start the alpha source calibration run with pedestal suppression (except for MG7 and MG9) and cooling at 0 deg.
The HV for MUST2 are in attachment. It is not clear whether they will remain unchanged during the experiment since some currents are high. |
|
Fixed, TEST, Thu Feb 21 14:37:26 2019, iulian, valerian &Freddy, GRIT, Hardware, 3-alpha, Results Calibration 3-alpha RUN30 MG1, MG3,MG5 & MG7 8x
|
Results of the calibration run 30
In order:
Telescope1 X,Y (MG5 X,Y)
Telescope4 X,Y (MG3 X,Y)
Telescope7 X,Y (MG7 X,Y)
Telescope9 X,Y (MG1 X,Y) |
|
Fixed, TEST, Wed Jan 23 09:11:26 2019, Valérian-Marlène, GRIT, General, 3-alpha, RUN9 : 3 alpha source run on MG10C & MG3T
|
RUN 9 (over night 22/01 ->23/01)
3 alpha source (not centered)
MG10C and MG3T ON
MG10C is connected to MG5T HT and BT and seen on MUVI1 channel2 -> online name=MM2
MG3T is connected to MG3T HT and BT and seen on MUVI1 channel3 -> online name=MM3
Attached : current and bias of the detectors (decreasing with time)
+ online spectra for 3 alpha source run
MG10C has 7 missing strips ! (see attached spectrum) |
|
Fixed, TEST, Mon Mar 4 16:24:51 2019, valerian marlène, GRIT, General, , RUN52 3 alpha source 4MUST2 no pedestal
|
RUN52
3 alpha source run with only 4MUST2 (in MUVI3) with pedestal suppression at 13 deg. |
|
Fixed, e775s, Fri Feb 28 08:26:37 2020, mugast, RUN, General, CD2, RUN142/143 MUGAST Spectra 8h30
|
|
|
Fixed, e775s, Thu Feb 27 12:35:39 2020, Marlène Nicolas, GRIT, General, , RUN128-137_138 analysis
|
Kinematic lines for the full statistics up to now
States above E*>7 MeV are cut in the angles >140 because of energy threshold. |
|
Fixed, TEST, Thu Feb 7 09:52:08 2019, Freddy, Marlène, RUN, General, 3-alpha, RUN10 : 3 alpha source on MG1-3-4-5-7
|
Test run with alpha source in front of trapezoid detectors.
First run with new LABELS updated from "MM" to "MG0" in GECO.
name : run_0010.dat.06-02-19_19h08m11s (1.4 GB)
date: 06/02/2019
start: 19:08
stop: ~22:00 |
|