Fixed, TEST, Fri Feb 14 17:26:05 2020, mugast, OTHER, General, N/A, Run 517 - Pedestal with source 
|
RUN 517
Pedestal run with alpha source |
|
Fixed, TEST, Wed Feb 12 09:32:17 2020, mugast, RUN, General, 3-alpha, Run 500 - 3alpha - mugast standalone
|
RUN 500
start: 11/02/2020 @ 19h00
stop: 12/02/2020 @ 10h00
alpha source test - cooling 14°C
Remarks:
- The two new detectors (MG2 and 6) seem functional;
- MG11 annular, ok for sectors (Y) but many rings have double peaks;
- MM1 current was oscillating yesterday evening with values around 3 uA, this morning it was stable at ~0.55 uA. |
|
Fixed, e768s, Thu Aug 1 16:01:16 2019, OttoRun, RUN, General, 3-alpha, Run 319 (Alpha calibration with pedestal suppression)
|
*************************
Run : 319
*************************
Start at 2019-08-01 16:00:31.525552
Run 319 in MugastX/mugast
Alpha run pedestal supp
Calib after manip
Stop at 2019-08-02 09:39:57.536485
Stop comment: end of alpha run
Stop at 2019-08-02 09:53:34.227950
Stop comment: type your message here |
|
Fixed, e744s, Thu Apr 18 13:12:39 2019, OttoRun, RUN, General, N/A, Run 207 crap
|
*************************
Run : 207
*************************
Start at 2019-04-18 13:12:21.314806
TAC Calibration after experiment
Stop at 2019-04-18 13:13:41.433276
Stop comment: |
|
Fixed, e768s, Mon Jul 29 19:49:19 2019, Freddy, Sylvain, Nicolas, BEAM, General, LiF, Run 158 : Beam profile after beam tuning
|
Below is the beam profile and the scaler corresponding to the beam after optimisation
Edit : beam intensity is strongly fluctuating : current intensity is 2 10⁶ |
|
Fixed, e768s, Sat Jul 27 21:40:16 2019, mugast, RUN, General, LiF, Run 154_5 19x
|
|
|
Fixed, e768s, Sat Jul 27 10:48:56 2019, Faïrouz, Beyhan, Daniele, RUN, General, LiF, Run 154 scalers and beam profile @14h06
|
|
|
Fixed, e768s, Sat Jul 27 10:08:38 2019, Faïrouz, Beyhan, Daniele & Nicolas, RUN, General, LiF, Run 152 scalers and beam profile
|
|
|
Fixed, e768s, Sat Jul 27 07:20:33 2019, Sylvain & Andrea, ONLINE, General, LiF, Run 152 : Beam profile and scaler 20x
|
|
|
Pinned, e768s, Sat Jul 27 04:12:57 2019, Sylvain & Freddy, BEAM, General, LiF, Run 152 - Scaler & screenshot + Beam profile 14x
|
|
|
Fixed, e768s, Fri Jul 26 03:59:11 2019, Kseniia, Franck, ONLINE, General, LiF, Run 149 screenshots 17x
|
|
|
Fixed, e768s, Fri Jul 26 05:57:04 2019, Kseniia, Franck, ONLINE, General, LiF, Run 149 screenshots 17x
|
A second beam component is visible in particular in IC energy losses (with Z larger than 7) and in MW.
This probably corresponds to the 15O from the Spiral target-ion source being warmed up by the primary beam that has increased overnight (~1200 W at 5:45 am).
Checked by reducing the primary intensity for a few minutes: the second component decreased to a level comparable to that at the beginning of run 149. |
|
Fixed, e775s, Thu Feb 27 19:35:26 2020, mugast, RUN, General, CD2, Run 142 : beam stopped
|
Beam stopped at 19h20 : drift of beam line hit a neutron watcher in one of G1 neighboring rooms, radiosecurity
protocol started.
On call team must come : estimation beam back on in 30min.
Beam back at 20h00 : 3.10^5 pps |
|
Fixed, e744s, Wed Apr 17 16:53:53 2019, Sylvain (AGATA), AGATA, General, 152Eu, Run 137 : Eu calibration
|
Run stared 2019/04/17
EU efficiency Calibration |
|
Fixed, e744s, Wed Apr 17 04:06:28 2019, mugast, RUN, General, N/A, Run 136_1 CATS lost efficiency with respect to VAMOS
|
|
|
Fixed, e744s, Tue Apr 16 20:58:40 2019, Faïrouz, Julian, Jaromir & Sylvain, RUN, General, CH2, Run 136 started
|
Comment: automatic logger didnt work
*************************
Run : 136
*************************
Start at 2019-04-16 ~ 20:56
*************************
Run : 136
*************************
Run Conditions:
Operator: Faïrouz & Julian & Jaromir & Sylvain
Trigger: MUGAST + Vamos %1000 + CATS %30000
Target #5 (CH2) thin
Beam: 14O
Intensity: ~2.0e5
Brho = 0.550875 Tm
CATS2 in
Finger at +16 mm
WITH AGATA |
|
Fixed, e744s, Tue Apr 16 23:46:39 2019, Fairouz & jaromir, OFFLINE, General, CH2, Run 136 (First hour) CATS lost efficiency with respect to VAMOS
|
|
|
Fixed, e744s, Tue Apr 16 20:42:35 2019, Faïrouz & & Julian & Jaromir, RUN, General, CH2, Run 135 started (Change of the finger position during the run)
|
automatic logger didnt work ... this is a manual entry:
*************************
Run : 135
*************************
Start at 2019-04-16 ~ 20:36
*************************
Run : 135
*************************
Run Conditions:
Operator: Faïrouz & & Julian & Jaromir
Trigger: MUGAST + Vamos %1000 + CATS %30000
Target #5 (CH2) thin
Beam: 14O
Intensity: ~1.5e4 will increase during the run
Brho = 0.550875 Tm as in run 125
CATS2 in
Finger at +13 mm
WITH AGATA
Comment: automatic logger didnt work |
|
Fixed, e768s, Thu Jul 25 07:00:15 2019, mugast, RUN, General, LiF, Run 135 - stop 6x
|
Qpole 41 lost (Q41). Beam stopped before recovery.
Operator not able to get it back. Will try without waiting on next operator. |
|
Fixed, e744s, Tue Apr 16 11:48:07 2019, Marion, Dieter, Beyan, Kseniia, + everyone , ONLINE, Social, Carbon, Run 134. Carbon target.
|
Run #134
Target #4 Carbon @ 8.4 mg/cm**2
Brho=0.5807 Tm
Finger at 500 mm
Pepperpot removed. Closed slits.
PCP working to provide us with ~10**5 pps on CATS. |
|