MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 52 of 132  Not logged in MUGAST
 Find |  Login 
 Full | Summary | Threaded | Hide attachments  Show only new entries   2636 Entries 
Goto page Previous  1, 2, 3 ... 51, 52, 53 ... 130, 131, 132   Next  
Status ExpNbrdown Date Author Type Category Target-Source Subject
Fixede744s Fri Apr 12 08:01:12 2019 valerianRUNGeneralCH2run 88 screenshots
Attachment 1: TAC_run88.png
TAC_run88.png
Attachment 2: CATS_XY_run88.png
CATS_XY_run88.png
Attachment 3: MG_ToF_run88.png
MG_ToF_run88.png
Attachment 4: MM_DeE_run88.png
MM_DeE_run88.png
Attachment 5: MM_ToF_run88.png
MM_ToF_run88.png
Attachment 6: MGIMPACT_MATRIX_run88.png
MGIMPACT_MATRIX_run88.png
Attachment 7: MMIMPACT_MATRIX_run88.png
MMIMPACT_MATRIX_run88.png
Attachment 8: MUVI3_Scaler_run88.png
MUVI3_Scaler_run88.png
Attachment 9: MUVI2_Scaler_run88.png
MUVI2_Scaler_run88.png
Attachment 10: U2M_Scaler_run88.png
U2M_Scaler_run88.png
Attachment 11: MUVI1_Scaler_run88.png
MUVI1_Scaler_run88.png
Fixede744s Fri Apr 12 08:19:31 2019 MarlèneOFFLINEGeneral CATS profiles RUN87
Attachment 1: CATS_pos_RUN87.png
CATS_pos_RUN87.png
Attachment 2: CATS_chargeX_run87.png
CATS_chargeX_run87.png
Attachment 3: CATS_chargeX_2_run87.png
CATS_chargeX_2_run87.png
Attachment 4: CATS_chargeY_run87.png
CATS_chargeY_run87.png
Attachment 5: CATS_ChargeY_2_run87.png
CATS_ChargeY_2_run87.png
Fixede744s Fri Apr 12 09:01:28 2019 OttoRunRUNGeneralCH2Run90
*************************
Run : 90
*************************

Start at 2019-04-12 09:00:41.342650

Run Conditions:
  • Operator: Louis
  • Trigger: MVAMOS
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Stop at 2019-04-12 09:05:00.469744
Stop comment: STop due TO ganlx7 crash TCP.Error on VAMOS_VME Entering to reboot CPU
Fixede744s Fri Apr 12 09:12:52 2019 OttoRunRUNGeneralCH2Run91
*************************
Run : 91
*************************

Start at 2019-04-12 09:12:29.222765

Run Conditions:
  • Operator: Louis
  • Trigger: MVAMOS
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open
After rebboting ganlx7 (VAMOS_VME)

Stop at 2019-04-12 09:32:38.858638
Stop comment:
Fixede744s Fri Apr 12 09:25:10 2019 MarlèneONLINEGeneral TAC
Attachment 1: Capture_du_2019-04-12_09-24-34.png
Capture_du_2019-04-12_09-24-34.png
Fixede744s Fri Apr 12 09:33:33 2019 OttoRunRUNGeneralCH2Run92
*************************
Run : 92
*************************

Start at 2019-04-12 09:33:19.869189

Run Conditions:
  • Operator: Louis
  • Trigger: MUST2
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open
After rebboting ganlx7 (VAMOS_VME)

Stop at 2019-04-12 09:37:30.065218
Stop comment: Start did not Start !
Fixede744s Fri Apr 12 09:37:43 2019 OttoRunRUNGeneralCH2Run93
*************************
Run : 93
*************************

Start at 2019-04-12 09:37:36.997465

Run Conditions:
  • Operator: Louis
  • Trigger: MUST2
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open
Fixede744s Fri Apr 12 09:41:38 2019 OttoRunRUNGeneralCH2Run94
*************************
Run : 94
*************************

Start at 2019-04-12 09:41:27.977232

Run Conditions:
  • Operator: Louis
  • Trigger: MUGAST + Vamos
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Stop at 2019-04-12 10:11:29.453680
Attachment 1: run94_9.png
run94_9.png
Attachment 2: run94_8.png
run94_8.png
Attachment 3: run94_7.png
run94_7.png
Attachment 4: run94_6.png
run94_6.png
Attachment 5: run94_5.png
run94_5.png
Attachment 6: run94_4.png
run94_4.png
Attachment 7: run94_3.png
run94_3.png
Attachment 8: run94_2.png
run94_2.png
Attachment 9: run94_1.png
run94_1.png
Attachment 10: run94_scaler3.png
run94_scaler3.png
Attachment 11: run94_scaler2.png
run94_scaler2.png
Attachment 12: run94_ELabThetaLabrun87_E745_HFvsCATS.png
run94_ELabThetaLabrun87_E745_HFvsCATS.png
Fixede744s Fri Apr 12 10:12:45 2019 ValerianOFFLINESoftwareCH2Comparison between HF and CATS for ELab ThetaLab
Using the HF show noises that is not seen with CATS on the ToF spectra
Attachment 1: ELabThetaLabrun87_E744_HFvsCATS.png
ELabThetaLabrun87_E744_HFvsCATS.png
Fixede744s Fri Apr 12 10:17:57 2019 OttoRunRUNGeneralCH2Run95
*************************
Run : 95
*************************

Start at 2019-04-12 10:09:45.911078

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

working inside G1

Stop at 2019-04-12 10:33:06.491018
Stop comment:
Fixede744s Fri Apr 12 10:36:09 2019 ValerianRUNGeneralN/AProcedure to follow during runs
At the beginning of a run :

  • Do screenshots of the scalers and add them to the elog.(Say it is at the beginning of the run)

During a run, one should :

  • Check regularly the scalers.
  • Look at the different pages on vigru.
  • Check if there are any problem concerning the Voltages, a window should be prompted to you if it is the case. If the window has FP written it is on the VAMOS side.
  • Do conversion, see corresponding entry (Or paper next to computer)
  • Check the last pending issues in the elog and if they are fixed, edit them to fix (any HV trip or over-current are pending and shoudl be switch to fix).

Every hours and before stopping the run:

  • Do screenshots of the scalers and add them to the elog.(Say at which time it is done)
  • Do screenshots of all the vigru pages of MUGAST and VAMOS and add them to the elog.
Fixede744s Fri Apr 12 10:37:03 2019 OttoRunRUNGeneralCH2Run96
*************************
Run : 96
*************************

Start at 2019-04-12 10:36:45.359601

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Timing Setting

Stop at 2019-04-12 11:16:49.078211
Stop comment: Entering Change Delay on T_FPMW_CATS2
Fixede744s Fri Apr 12 11:29:46 2019 OttoRunRUNGeneralCH2Run97
*************************
Run : 97
*************************

Start at 2019-04-12 11:29:03.948068

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: reduced to ~ 300 Hz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Correct TAC T_FPMW_XXX FPMW Fifo Pb with 50 ohm terminator ...

Stop at 2019-04-12 11:45:25.662355
Stop comment: Entering to Set Vamos %100
Fixede744s Fri Apr 12 11:55:26 2019 OttoRunRUNGeneralCH2Run98
========================================
*************************
Run : 98
*************************

Start at 2019-04-12 11:54:05.693507

Run Conditions:
  • Operator: Iulian ,Antoine, Diego
  • Trigger: MUGAST + Vamos %100
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: increasing intensity to 10kHz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Stop at 2019-04-12 12:30:17.695767
Stop comment: Stoping to give beam to IBE to do reference Measurement
Attachment 1: run98_Vamos_1.png
run98_Vamos_1.png
Attachment 2: run98_Vamos_2.png
run98_Vamos_2.png
Attachment 3: run98_Vamos_3.png
run98_Vamos_3.png
Attachment 4: run98_Vamos_4.png
run98_Vamos_4.png
Attachment 5: run98_Vamos_5.png
run98_Vamos_5.png
Attachment 6: run98_Vamos_6.png
run98_Vamos_6.png
Attachment 7: run98_Vamos_7.png
run98_Vamos_7.png
Attachment 8: run98_Vamos_8.png
run98_Vamos_8.png
Attachment 9: run98_Vamos_9.png
run98_Vamos_9.png
Attachment 10: run98_Vamos_10.png
run98_Vamos_10.png
Attachment 11: run98_Vamos_11.png
run98_Vamos_11.png
Attachment 12: run98_Vamos_12.png
run98_Vamos_12.png
Fixede744s Fri Apr 12 12:04:55 2019 OttoRunRUNGeneralCH2Run98

OttoRun wrote:
*************************
Run : 98
*************************

Start at 2019-04-12 11:54:05.693507

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos %100
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: increasing intensity to 10kHz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Trip of DC2_W : Reducing HV of DC2_W from 650 to 620V
Fixede744s Fri Apr 12 13:34:33 2019 iulianOTHERGeneralN/AE744 Status
1) Beam tuning during the night.
2) around 04h00 started runs at 4e+4
3) beam intensity decreased to 1e+4 @7h30 in the morning.
4) Vamos tuning at 8h
5) run low intensity at 12h30 et high intensity (1e+4) @13h.
6) @13h give the beam to PCP to increase the beam intensity. First IBE measurement
7) If beam I<5e+4 measure directly in Vamos
8) If beam I>5e+4 we have to cut in part the beam in Vamos or not use Vamos
Fixede744s Fri Apr 12 13:53:56 2019 diegoOTHERGeneral intervention
TAC FPMW_HF in VAMOS was still out of range for MUGAST physics
We increased the range from 1us to 2us and applied a delay of 200 ns to the stop of the TAC.
Fixede744s Fri Apr 12 14:13:11 2019 Giuseppe D'AgataOTHERSoftwareN/AConverted runs

Runs additionally converted up to now:
70
71
80.0
80.1
81.0
81.1
82
83
84
85

86.1

91
94
95

96.1
97
98
Fixede744s Fri Apr 12 14:21:04 2019 OttoRunRUNGeneralCH2Run99
*************************
Run : 99
*************************

Start at 2019-04-12 14:20:41.671438

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos %100
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: increasing intensity to 10kHz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Stop at 2019-04-12 14:27:41.833179
Stop comment:
Fixede744s Fri Apr 12 14:51:31 2019 OttoRunRUNGeneralCH2Run101
*************************
Run : 101
*************************

Start at 2019-04-12 14:51:13.371974

Run Conditions:
  • Operator: Louis,Antoine
  • Trigger: MUGAST + Vamos %100
  • Target/Source: CH2 target 2
  • Beam: 14O
  • Intensity: increasing intensity to 10kHz
  • Brho = 0.5283 Tm
  • !CATS/VAMOS (CATS Efficiency)! : XXXX

Comment:

Start Target 2: 104 um
VAMOS is Open

Stop at 2019-04-12 14:56:36.459114
Stop comment:
Goto page Previous  1, 2, 3 ... 51, 52, 53 ... 130, 131, 132   Next  

ELOG Home Page