|
Fixed, e768s, Fri Jul 12 16:35:10 2019, OttoRun, RUN, General, 3-alpha, Run303
|
*************************
Run : 303
*************************
Start at 2019-07-12 16:35:04.481793
3 alpha calibration run
+ MM2 masks
+ suppressed pedestals
Square detectors:
+ MG10: all X &Y strips masked;
+ MG9 removed
Stop at 2019-07-12 16:38:40.222071
Stop comment: type your message here |
|
Fixed, e768s, Fri Jul 12 16:42:22 2019, OttoRun, RUN, General, 3-alpha, Run303
|
JUNK
*************************
Run : 303
*************************
Start at 2019-07-12 16:41:50.518089
3 alpha calibration run
+ MM2 masks
+ suppressed pedestals (new pedestal for all trap detectors)
Square detectors:
+ MG10: not biased
+ MG9 removed
Stop at 2019-07-12 16:43:54.495178
Stop comment: type your message here |
|
Fixed, e768s, Thu Jul 11 16:54:34 2019, OttoRun, RUN, General, 3-alpha, Run302
|
*************************
Run : 302
*************************
Start at 2019-07-11 16:54:22.512184
3 alpha calibration run
+ without MM2 masks
+ suppressed pedestals
Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked
Stop at 2019-07-12 05:44:35.805449
Stop comment: |
Fixed, e768s, Mon Jul 15 14:38:27 2019, Franco, RUN, General, 3-alpha, Run302 
|
Attached the calibrated spectra for MUST2 and Mugast for run 302 (no pedestals).
| OttoRun wrote: | *************************
Run : 302
*************************
Start at 2019-07-11 16:54:22.512184
3 alpha calibration run
+ without MM2 masks
+ suppressed pedestals
Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked
Stop at 2019-07-12 05:44:35.805449
Stop comment: |
|
|
Fixed, e768s, Fri Jul 19 23:10:18 2019, Franco, RUN, General, 3-alpha, Run302
|
Added energy calibration for square detector (MG 10).
| OttoRun wrote: | *************************
Run : 302
*************************
Start at 2019-07-11 16:54:22.512184
3 alpha calibration run
+ without MM2 masks
+ suppressed pedestals
Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked
Stop at 2019-07-12 05:44:35.805449
Stop comment: |
|
|
Fixed, e768s, Fri Jul 19 23:12:36 2019, Franco, RUN, General, 3-alpha, Run302
|
Added energy calibration for square detector (MG 10).
| Franco wrote: | Attached the calibrated spectra for MUST2 and Mugast for run 302 (no pedestals).
| OttoRun wrote: | *************************
Run : 302
*************************
Start at 2019-07-11 16:54:22.512184
3 alpha calibration run
+ without MM2 masks
+ suppressed pedestals
Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked
Stop at 2019-07-12 05:44:35.805449
Stop comment: |
|
|
|
Fixed, e768s, Thu Jul 11 15:12:21 2019, OttoRun, RUN, General, 3-alpha, Run301
|
*************************
Run : 301
*************************
Start at 2019-07-11 15:07:27.670320
3 alpha calibration run
+ without MM2 masks
+ non suppressed pedestals
Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked
Stop at 2019-07-11 16:52:55.206383
Stop comment: stopping run to put pedestal suppression |
|
Fixed, e768s, Mon Jul 15 18:28:19 2019, Franco, RUN, General, 3-alpha, Run301
|
Attached the calibrated spectra for MUST2 and Mugast for run 301.
| OttoRun wrote: | *************************
Run : 301
*************************
Start at 2019-07-11 15:07:27.670320
3 alpha calibration run
+ without MM2 masks
+ non suppressed pedestals
Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked
Stop at 2019-07-11 16:52:55.206383
Stop comment: stopping run to put pedestal suppression |
|
|
Fixed, e768s, Tue Jul 16 09:51:56 2019, Franco, RUN, General, 3-alpha, Run301
|
Attached the dat file with the position of the pedestals for each strip of MG3_X
that can be used to correct the pedestal problem of MG3_X in later runs (from run O306).
| Franco wrote: | Attached the calibrated spectra for MUST2 and Mugast for run 301.
| OttoRun wrote: | *************************
Run : 301
*************************
Start at 2019-07-11 15:07:27.670320
3 alpha calibration run
+ without MM2 masks
+ non suppressed pedestals
Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked
Stop at 2019-07-11 16:52:55.206383
Stop comment: stopping run to put pedestal suppression |
|
|
|
Fixed, e768s, Tue Jul 16 09:17:48 2019, OttoRun, RUN, General, N/A, Run30
|
*************************
Run : 30
*************************
Start at 2019-07-16 00:54:27.174959
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, e768s, Tue Jul 16 09:18:07 2019, OttoRun, RUN, General, N/A, Run29
|
*************************
Run : 29
*************************
Start at 2019-07-16 00:35:09.645821
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, e786s, Sun Jun 23 18:09:17 2019, OttoRun, RUN, General, Cryo-empty, Run28
|
*************************
Run : 28
*************************
Start at 2019-06-23 18:09:16.019140
VAMOS tunning Continued with 2.5 10*4
After Fixing the IC preamp issue
Brho0=1.05 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
TRIGGER
VAMOS %1000
MUGAST
MUS2
Stop at 2019-06-23 18:15:20.785307
Stop comment: |
|
Fixed, e768s, Tue Jul 16 09:17:49 2019, OttoRun, RUN, General, N/A, Run28
|
*************************
Run : 28
*************************
Start at 2019-07-16 00:15:50.617493
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s
Stop at 2019-07-16 09:17:51.288072
Stop comment:
Stop at 2019-07-16 09:17:51.824283
Stop comment:
Stop at 2019-07-16 09:17:52.302740
Stop comment:
Stop at 2019-07-16 09:17:52.781598
Stop comment: |
|
Fixed, e768s, Tue Jul 16 09:18:09 2019, OttoRun, RUN, General, N/A, Run27
|
*************************
Run : 27
*************************
Start at 2019-07-15 23:56:24.751783
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, com2019, Sun Apr 7 21:45:35 2019, OttoRun, RUN, General, CD2, Run262
|
*************************
Run : 262
*************************
Start at 2019-04-07 21:45:06.409673
Run Conditions:
- Operator: Iulian Marlene
- Trigger: MUST2 + MG BWd + VAMOS % 100
- Target/Source: CD2 1mg
- Beam: no
- Intensity:
Comment: Target holder removed
background check
Stop at 2019-04-08 07:38:35.058779
Stop comment:
end run
Alfa background is continuous in energy particularly in the backward detectors
|
|
Fixed, com2019, Sun Apr 7 21:43:29 2019, OttoRun, RUN, General, CD2, Run261
|
*************************
Run : 261
*************************
Start at 2019-04-07 21:43:00.572161
Run Conditions:
- Operator: Iulian Marlene
- Trigger: MUST2 + MG BWd + VAMOS % 100
- Target/Source: CD2 1mg
- Beam: no
- Intensity:
Comment: Target holder in position
junk
Stop at 2019-04-07 21:44:59.581974
Stop comment: junk |
|
Fixed, e744s, Wed Apr 10 10:36:48 2019, OttoRun, RUN, General, N/A, Run26
|
*************************
Run : 26
*************************
Start at 2019-04-10 10:36:46.761926
Run Conditions:
- Operator: A. Lemasson
- Trigger: Vamos Pb with DC 63
- Target/Source: none
- Beam: VAMOS Closed
- Intensity:
Comment:
Test ACQ
Stop at 2019-04-10 10:46:01.017415
Stop comment: |
|
Fixed, e786s, Sun Jun 23 17:44:22 2019, OttoRun, RUN, General, Cryo-empty, Run26
|
*************************
Run : 26
*************************
Start at 2019-06-23 17:44:18.480300
VAMOS tunning Continued with 2.5 10*4
After Fixing the IC preamp issue
Brho0=1.05 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
TRIGGER
VAMOS %1000
MUGAST
MUS2
Stop at 2019-06-23 18:03:57.967230
Stop comment:
Stop at 2019-06-23 18:08:11.630931
Stop comment: |
|
Fixed, e768s, Tue Jul 16 09:32:10 2019, OttoRun, RUN, General, N/A, Run26
|
*************************
Run : 26
*************************
Start at 2019-07-15 23:37:09.715822
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
|
Fixed, com2019, Sat Apr 6 18:32:26 2019, OttoRun, RUN, General, CD2, Run259
|
*************************
Run : 259
*************************
Start at 2019-04-06 18:31:46.303930
Run Conditions:
- Operator:
- Trigger: MUST2 + MG BWd + VAMOS % 100
- Target/Source: CD2 1mg
- Beam: no
- Intensity:
Comment: Target holder in position
|