|
Fixed, TEST, Tue Apr 16 11:33:26 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC1_w1 Slot: 2 (A1821HMP) Channel:0 Vmon: 663.5 V Imon: 0.111 uA Status: OVER CURRENT
|
|
Fixed, TEST, Tue Apr 16 11:34:13 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_CATS1 Slot: 2 (A1821HMP) Channel:7 Vmon: 569.25 V Imon: 0.059 uA Status: OVER CURRENT
|
|
Fixed, e744s, Tue Apr 16 11:35:28 2019, OttoRun, RUN, General, CH2, Run133
|
*************************
Run : 133
*************************
Start at 2019-04-16 11:34:45.698105
Run Conditions:
Operator: Dieter, Marion, Beyhan, Kseniia
Trigger: MUGAST + Vamos %1000 + CATS %30000
Target #4 (C)
Beam: 14O
Intensity: ~2e4 with the pepperpot in.
Brho = 0.5807 Tm
CATS2 in
Finger at +13 mm
WITH AGATA
Comment:
Vamos setting for Carbon.
Stop at 2019-04-16 11:44:43.708450
Stop comment: |
Fixed, e744s, Tue Apr 16 11:39:40 2019, Valerian, OFFLINE, Software, CH2, two proton kinematics and center of mass reconstruction with all stat 
|
|
|
Fixed, e744s, Tue Apr 16 11:40:04 2019, mugast, CATS, Hardware, N/A, CATS HV
|
CATS2 HV was decreased to 540 V at 11h30 to avoid the overcurrent.
Need to monitor Efficiency, Time resolution as soon as the run restart with new target. |
|
Fixed, TEST, Tue Apr 16 11:40:13 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 598.5 V Imon: 0.297 uA Status: OVER CURRENT
|
|
Fixed, e744s, Tue Apr 16 11:44:10 2019, Marion, Dieter, TARGET, General, Carbon, Run 133. Carbon target in 60 microns. Setting up.
|
|
|
Fixed, e744s, Tue Apr 16 11:48:07 2019, Marion, Dieter, Beyan, Kseniia, + everyone , ONLINE, Social, Carbon, Run 134. Carbon target.
|
Run #134
Target #4 Carbon @ 8.4 mg/cm**2
Brho=0.5807 Tm
Finger at 500 mm
Pepperpot removed. Closed slits.
PCP working to provide us with ~10**5 pps on CATS. |
|
Fixed, TEST, Tue Apr 16 12:01:06 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 596 V Imon: 0.384 uA Status: OVER CURRENT
|
|
Fixed, TEST, Tue Apr 16 12:06:18 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 574 V Imon: 0.569 uA Status: OVER CURRENT
|
|
Fixed, e744s, Tue Apr 16 12:10:05 2019, OttoRun, RUN, General, CH2, Run134
|
*************************
Run : 134
*************************
Start at 2019-04-16 11:48:58.245193
*************************
Run : 134
*************************
Run Conditions:
Operator: Marion, Beyhan, Dieter, Kseniia
Trigger: MUGAST + Vamos %1000 + CATS %30000
Target #4 (C)
Beam: 14O
Intensity: ~2e4 increased to ~1e5 during run
Brho = 0.5807 Tm
CATS2 in
Finger at +500 mm
WITH AGATA
Comment:
Stop at 2019-04-16 20:18:39.131994
Stop comment: end of run 134 to change target to the thin CH2
Stop at 2019-04-16 20:51:59.202506
Stop comment: end of run135 to increase the beam to 2.e5pps
Stop at 2019-04-17 06:51:43.430562
Stop comment: run stop because CSS2 was out - end of experiment |
|
Fixed, TEST, Tue Apr 16 12:11:21 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 588.75 V Imon: 0.389 uA Status: OVER CURRENT
|
|
Documents, e744s, Tue Apr 16 12:15:28 2019, Beyhan, OTHER, General, , VAMOS settings for C run
|
|
|
Fixed, TEST, Tue Apr 16 12:18:00 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 566.25 V Imon: 0.655 uA Status: OVER CURRENT
|
|
Fixed, TEST, Tue Apr 16 12:22:24 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 612 V Imon: 0.171 uA Status: OVER CURRENT
|
|
Fixed, TEST, Tue Apr 16 12:27:37 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 571.5 V Imon: 0.539 uA Status: OVER CURRENT
|
|
Fixed, TEST, Tue Apr 16 12:32:59 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 499.75 V Imon: 0.998 uA Status: OVER CURRENT
|
|
Fixed, TEST, Tue Apr 16 12:38:18 2019, OttoH.V., OTHER, Hardware, N/A, HVM_ERROR
|
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 619.75 V Imon: 0.039 uA Status: OVER CURRENT
|
|
Fixed, e744s, Tue Apr 16 12:44:22 2019, Marion, Dieter, BEAM, General, Carbon, ventilation problem CSS2 12:43
|
ventilation problem CSS2 12:43
Beam back at 13h24 (see scaler attached) |
|
Fixed, , Tue Apr 16 12:18:46 2019, AGATA, AGATA, Hardware, , ATC4 - position 13 HV tripped
|
- HV tripped around 12h10.
- need access to check the origin |
|
Fixed, , Tue Apr 16 13:15:48 2019, AGATA, AGATA, Hardware, , ATC4 - position 13 HV tripped
|
set 1500 V at 13h15 |
|