|
Fixed, e768s, Tue Jul 16 19:04:39 2019, OttoRun, RUN, General, Empty, Run58
|
*************************
Run : 58
*************************
Start at 2019-07-16 19:03:08.507908
15N beam tuning
6kHz on profiler fluctuating
Target #1 1.25 mg/cm2
Brho = 0.640 Tm
-62 read value from -162 read value before this run
Stop at 2019-07-16 20:34:23.882740
Stop comment: |
|
Fixed, e744s, Wed Apr 10 23:56:35 2019, OttoRun, RUN, General, N/A, Run57
|
*************************
Run : 57
*************************
Start at 2019-04-10 23:56:04.653778
Run Conditions:
- Operator: A. Lemasson
- Trigger: VAMOS
- Target/Source: No Target
- Beam: 14N
- Intensity: ~ 1e3
- Brho = 0.79067 Tm
- CATS 2 IN
Comment:
Reference Run Without target and IC OK PPAC voltages were too low in MW08
C6 E5-H0 -1.5
C6 E3-VE 0.5
After Setting IC Threshold
Stop at 2019-04-11 00:00:51.262090
Stop comment: |
|
Fixed, e786s, Tue Jun 25 10:51:59 2019, OttoRun, RUN, General, 152Eu, Run57
|
*************************
Run : 57
*************************
Start at 2019-06-25 10:50:03.672363
152Eu source @ AGATA
Stop at 2019-06-25 14:36:40.442175
Stop comment: end ; source removed |
Fixed, e768s, Tue Jul 16 18:58:01 2019, OttoRun, RUN, General, Empty, Run57 
|
*************************
Run : 57
*************************
Start at 2019-07-16 18:57:40.339281
15N beam tuning
6kHz on profiler fluctuating
Target #1 1.25 mg/cm2
Brho = 0.640 Tm
Stop at 2019-07-16 19:00:38.206914
Stop comment: |
|
Fixed, e793s, Fri Mar 12 10:32:41 2021, OttoRun, RUN, General, CD2, Run57
|
*************************
Run : 57
*************************
Start at 2021-03-12 10:32:22.121271
Test run. ACQ DT
(ATC6 crystal stopped)
New beam tune with better centering from Bertrand
Beam: 3.5e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%
Stop at 2021-03-12 11:12:37.613523
Stop comment: type your message here |
|
Fixed, e744s, Wed Apr 10 23:31:05 2019, OttoRun, RUN, General, N/A, Run56
|
*************************
Run : 56
*************************
Start at 2019-04-10 23:30:06.453554
Run Conditions:
- Operator: A. Lemasson
- Trigger: VAMOS
- Target/Source: No Target
- Beam: 14N
- Intensity: ~ 1e3
- Brho = 0.79067 Tm
- CATS 2 IN
Comment:
Reference Run With target Hole and IC OK PPAC voltages were too low in MW08
C6 E5-H0 -1.5
C6 E3-VE 0.5
Stop at 2019-04-10 23:55:46.381062
Stop comment: |
|
Fixed, e786s, Mon Jun 24 17:42:33 2019, OttoRun, RUN, General, Cryo-3He, Run56
|
*************************
Run : 56
*************************
Start at 2019-06-24 17:41:25.679819
CATS1 removed
target 700mb
Brho0=1.05 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
AGATA position +51-25 mm
TRIGGER :
- VAMOS %1000
- CMG
- MM
- CATS2 %1000
Stop at 2019-06-25 02:55:05.207493
Stop comment: 48Ca source sample is empty. Need to be changed : probable change of beam tuning |
|
Fixed, e768s, Tue Jul 16 18:49:42 2019, OttoRun, RUN, General, Empty, Run56
|
*************************
Run : 56
*************************
Start at 2019-07-16 18:26:07.172054
15N beam tuning
6kHz on profiler fluctuating
Target #1 1.25 mg/cm2
Brho = 0.668 Tm
Optimisation Faisceau
Stop at 2019-07-16 18:50:17.607435
Stop comment: |
|
Fixed, e793s, Thu Mar 11 11:25:33 2021, OttoRun, RUN, General, CD2, Run56
|
*************************
Run : 56
*************************
Start at 2021-03-11 11:25:08.768341
Production run.
(ATC6 crystal stopped)
New beam tune with better centering from Bertrand
Beam: 3.5e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%
Stop at 2021-03-12 08:55:44.216996
Stop comment: 8h55 beam is stopped to repair a leak. probably 4h intervention |
|
Fixed, e744s, Wed Apr 10 23:00:27 2019, OttoRun, RUN, General, N/A, Run55
|
*************************
Run : 55
*************************
Start at 2019-04-10 23:00:06.487980
Run Conditions:
- Operator: A. Lemasson
- Trigger: VAMOS
- Target/Source: Hole 7mm
- Beam: 14N
- Intensity: ~ 1e3
- Brho = 0.79067 Tm
Comment:
Reference Run With target Hole and IC OK PPAC voltages were too low in MW08
C6 E5-H0 -1.5
C6 E3-VE 0.5
Stop at 2019-04-10 23:08:11.925795
Stop comment: |
|
Fixed, e786s, Mon Jun 24 16:30:19 2019, OttoRun, RUN, General, Cryo-3He, Run55
|
*************************
Run : 55
*************************
Start at 2019-06-24 16:29:04.386013
CATS1 is inserted
target 700mb
Brho0=1.05 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
******TEST OF TARGET THICKNESS*****
AGATA position +51 mm
TRIGGER :
- VAMOS %1000
- CATS1
- CATS2 %1000
Stop at 2019-06-24 17:38:27.010229
Stop comment:
* CATS1Y is not working --> We can't draw the CATS1 profile
* However we see scattering from CATS1 towards CATS2 in the shadowed region.
--> This means that the "thing" is most probably before CATS1 |
|
Fixed, e768s, Tue Jul 16 18:21:05 2019, OttoRun, RUN, General, Empty, Run55
|
*************************
Run : 55
*************************
Start at 2019-07-16 18:20:32.503844
15N beam tuning
6kHz on profiler fluctuating
Target #1 1.25 mg/cm2
Brho = 0.668 Tm
Stop at 2019-07-16 18:24:51.041880
Stop comment: |
|
Fixed, e793s, Thu Mar 11 10:18:48 2021, OttoRun, RUN, General, CD2, Run55
|
*************************
Run : 55
*************************
Start at 2021-03-11 10:17:52.398357
Production run.
(ATC6 crystal stopped)
New beam tune with better centering from Bertrand
Beam: 2.5e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%
Stop at 2021-03-11 11:23:27.810702
Stop comment: beam tuning by Bertrand to center it |
|
Fixed, e744s, Wed Apr 10 22:40:12 2019, OttoRun, RUN, General, N/A, Run54
|
*************************
Run : 54
*************************
Start at 2019-04-10 22:40:01.150255
Run Conditions:
- Operator: A. Lemasson
- Trigger: VAMOS
- Target/Source: Hole 7mm
- Beam: 14N
- Intensity: ~ 1e3
- Brho = 0.79067 Tm
Comment:
Reference Run With target Hole and IC OK
C6 E5-H0 -1.5
C6 E3-VE 0.5
Stop at 2019-04-10 22:59:42.204273
Stop comment: |
|
Fixed, e768s, Tue Jul 16 17:47:22 2019, OttoRun, RUN, General, Empty, Run54
|
*************************
Run : 54
*************************
Start at 2019-07-16 17:46:32.499359
15N beam tuning
6kHz on profiler fluctuating
Target #2 1.25 mg/cm2
Brho = 0.668 Tm
Stop at 2019-07-16 18:08:15.104330
Stop comment: |
|
Fixed, e793s, Thu Mar 11 09:43:56 2021, OttoRun, RUN, General, CD2, Run54
|
*************************
Run : 54
*************************
Start at 2021-03-11 09:42:58.222892
Production run.
(ATC6 crystal stopped)
Beam: 2.5e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%
Stop at 2021-03-11 10:15:45.347353
Stop comment: AGATA DAQ did not start |
|
Fixed, e744s, Wed Apr 10 22:15:30 2019, OttoRun, RUN, General, N/A, Run53
|
*************************
Run : 53
*************************
Start at 2019-04-10 22:14:38.456261
Run Conditions:
- Operator: A. Lemasson
- Trigger: VAMOS
- Target/Source: Hole 7mm
- Beam: 14N
- Intensity: ~ 1e3
- Brho = 0.79067 Tm
Comment:
Reference Run With target Hole
C6 E5-H0 -1.5
C6 E3-VE 0.5
Stop at 2019-04-10 22:39:54.849769
Stop comment: |
|
Fixed, e786s, Mon Jun 24 15:53:27 2019, OttoRun, RUN, General, Cryo-3He, Run53
|
*************************
Run : 53
*************************
Start at 2019-06-24 15:51:16.513185
Target Making (xxxx at start) with 2.5 10*4
Brho0=1.05 Tm
DC pressure 6 mbar
IC pressure 120 mbar
CATS2 inserted
******TEST OF TARGET THICKNESS*****
AGATA position +51 mm
TRIGGER :
- VAMOS %30
- MM
- MG
Stop at 2019-06-24 16:25:14.176085
Stop comment: |
|
Fixed, e768s, Tue Jul 16 17:32:04 2019, OttoRun, RUN, General, Empty, Run53
|
*************************
Run : 53
*************************
Start at 2019-07-16 17:30:54.350835
15N beam tuning
6kHz on profiler fluctuating
diameter = 7mm hole
Brho = 0.668 Tm
Reference run
Stop at 2019-07-16 17:36:46.671204
Stop comment: |
|
Fixed, e793s, Wed Mar 10 21:02:03 2021, OttoRun, RUN, General, CD2, Run53
|
*************************
Run : 53
*************************
Start at 2021-03-10 21:00:45.001418
Production run.
Beam: 4.5e5 pps
target: CD2 0.5mg
Trigger are MUGAST/MM/CATS%
Stop at 2021-03-11 09:40:34.970341
Stop comment: run stopped to enter and check position 0 ATC6 trip |
|