Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
Fixed | e744s |
Fri Apr 12 09:01:28 2019 |
OttoRun | RUN | General | CH2 | Run90 |
*************************
Run : 90
*************************
Start at 2019-04-12 09:00:41.342650
Run Conditions:
- Operator: Louis
- Trigger: MVAMOS
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Stop at 2019-04-12 09:05:00.469744
Stop comment: STop due TO ganlx7 crash TCP.Error on VAMOS_VME Entering to reboot CPU |
Fixed | e744s |
Fri Apr 12 09:12:52 2019 |
OttoRun | RUN | General | CH2 | Run91 |
*************************
Run : 91
*************************
Start at 2019-04-12 09:12:29.222765
Run Conditions:
- Operator: Louis
- Trigger: MVAMOS
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
After rebboting ganlx7 (VAMOS_VME)
Stop at 2019-04-12 09:32:38.858638
Stop comment: |
Fixed | e744s |
Fri Apr 12 09:25:10 2019 |
Marlène | ONLINE | General | | TAC |
|
Attachment 1: Capture_du_2019-04-12_09-24-34.png
|
|
Fixed | e744s |
Fri Apr 12 09:33:33 2019 |
OttoRun | RUN | General | CH2 | Run92 |
*************************
Run : 92
*************************
Start at 2019-04-12 09:33:19.869189
Run Conditions:
- Operator: Louis
- Trigger: MUST2
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
After rebboting ganlx7 (VAMOS_VME)
Stop at 2019-04-12 09:37:30.065218
Stop comment: Start did not Start ! |
Fixed | e744s |
Fri Apr 12 09:37:43 2019 |
OttoRun | RUN | General | CH2 | Run93 |
*************************
Run : 93
*************************
Start at 2019-04-12 09:37:36.997465
Run Conditions:
- Operator: Louis
- Trigger: MUST2
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open |
Fixed | e744s |
Fri Apr 12 09:41:38 2019 |
OttoRun | RUN | General | CH2 | Run94 |
*************************
Run : 94
*************************
Start at 2019-04-12 09:41:27.977232
Run Conditions:
- Operator: Louis
- Trigger: MUGAST + Vamos
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Stop at 2019-04-12 10:11:29.453680 |
Attachment 1: run94_9.png
|
|
Attachment 2: run94_8.png
|
|
Attachment 3: run94_7.png
|
|
Attachment 4: run94_6.png
|
|
Attachment 5: run94_5.png
|
|
Attachment 6: run94_4.png
|
|
Attachment 7: run94_3.png
|
|
Attachment 8: run94_2.png
|
|
Attachment 9: run94_1.png
|
|
Attachment 10: run94_scaler3.png
|
|
Attachment 11: run94_scaler2.png
|
|
Attachment 12: run94_ELabThetaLabrun87_E745_HFvsCATS.png
|
|
Fixed | TEST |
Fri Apr 12 10:00:51 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 547.5 V Imon: 0.882 uA Status: OVER CURRENT
|
Fixed | e744s |
Fri Apr 12 10:12:45 2019 |
Valerian | OFFLINE | Software | CH2 | Comparison between HF and CATS for ELab ThetaLab |
Using the HF show noises that is not seen with CATS on the ToF spectra |
Attachment 1: ELabThetaLabrun87_E744_HFvsCATS.png
|
|
Fixed | e744s |
Fri Apr 12 10:17:57 2019 |
OttoRun | RUN | General | CH2 | Run95 |
*************************
Run : 95
*************************
Start at 2019-04-12 10:09:45.911078
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
working inside G1
Stop at 2019-04-12 10:33:06.491018
Stop comment: |
Fixed | e744s |
Fri Apr 12 10:36:09 2019 |
Valerian | RUN | General | N/A | Procedure to follow during runs |
At the beginning of a run :
- Do screenshots of the scalers and add them to the elog.(Say it is at the beginning of the run)
During a run, one should :
- Check regularly the scalers.
- Look at the different pages on vigru.
- Check if there are any problem concerning the Voltages, a window should be prompted to you if it is the case. If the window has FP written it is on the VAMOS side.
- Do conversion, see corresponding entry (Or paper next to computer)
- Check the last pending issues in the elog and if they are fixed, edit them to fix (any HV trip or over-current are pending and shoudl be switch to fix).
Every hours and before stopping the run:
- Do screenshots of the scalers and add them to the elog.(Say at which time it is done)
- Do screenshots of all the vigru pages of MUGAST and VAMOS and add them to the elog.
|
Fixed | e744s |
Fri Apr 12 10:37:03 2019 |
OttoRun | RUN | General | CH2 | Run96 |
*************************
Run : 96
*************************
Start at 2019-04-12 10:36:45.359601
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Timing Setting
Stop at 2019-04-12 11:16:49.078211
Stop comment: Entering Change Delay on T_FPMW_CATS2 |
Fixed | TEST |
Fri Apr 12 11:09:53 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 649.75 V Imon: 0.013 uA Status: OVER CURRENT
|
Fixed | e744s |
Fri Apr 12 11:29:46 2019 |
OttoRun | RUN | General | CH2 | Run97 |
*************************
Run : 97
*************************
Start at 2019-04-12 11:29:03.948068
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: reduced to ~ 300 Hz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Correct TAC T_FPMW_XXX FPMW Fifo Pb with 50 ohm terminator ...
Stop at 2019-04-12 11:45:25.662355
Stop comment: Entering to Set Vamos %100 |
Fixed | e744s |
Fri Apr 12 11:55:26 2019 |
OttoRun | RUN | General | CH2 | Run98 |
========================================
*************************
Run : 98
*************************
Start at 2019-04-12 11:54:05.693507
Run Conditions:
- Operator: Iulian ,Antoine, Diego
- Trigger: MUGAST + Vamos %100
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: increasing intensity to 10kHz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Stop at 2019-04-12 12:30:17.695767
Stop comment: Stoping to give beam to IBE to do reference Measurement |
Attachment 1: run98_Vamos_1.png
|
|
Attachment 2: run98_Vamos_2.png
|
|
Attachment 3: run98_Vamos_3.png
|
|
Attachment 4: run98_Vamos_4.png
|
|
Attachment 5: run98_Vamos_5.png
|
|
Attachment 6: run98_Vamos_6.png
|
|
Attachment 7: run98_Vamos_7.png
|
|
Attachment 8: run98_Vamos_8.png
|
|
Attachment 9: run98_Vamos_9.png
|
|
Attachment 10: run98_Vamos_10.png
|
|
Attachment 11: run98_Vamos_11.png
|
|
Attachment 12: run98_Vamos_12.png
|
|
Fixed | TEST |
Fri Apr 12 11:57:28 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 626.75 V Imon: 0.289 uA Status: OVER CURRENT
|
Fixed | TEST |
Fri Apr 12 12:02:55 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 639.25 V Imon: 0.169 uA Status: OVER CURRENT
|
Fixed | e744s |
Fri Apr 12 12:04:55 2019 |
OttoRun | RUN | General | CH2 | Run98 |
OttoRun wrote: | *************************
Run : 98
*************************
Start at 2019-04-12 11:54:05.693507
Run Conditions:
- Operator: Louis,Antoine
- Trigger: MUGAST + Vamos %100
- Target/Source: CH2 target 2
- Beam: 14O
- Intensity: increasing intensity to 10kHz
- Brho = 0.5283 Tm
- !CATS/VAMOS (CATS Efficiency)! : XXXX
Comment:
Start Target 2: 104 um
VAMOS is Open
Trip of DC2_W : Reducing HV of DC2_W from 650 to 620V
|
|
Fixed | TEST |
Fri Apr 12 12:14:08 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_DC2_w2 Slot: 2 (A1821HMP) Channel:3 Vmon: 513 V Imon: 0.999 uA Status: OVER CURRENT
|
Fixed | TEST |
Fri Apr 12 12:15:31 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_DC1_w1 Slot: 2 (A1821HMP) Channel:0 Vmon: 666.5 V Imon: 0.253 uA Status: OVER CURRENT
FP_DC1_w2 Slot: 2 (A1821HMP) Channel:1 Vmon: 659.25 V Imon: 0.264 uA Status: OVER CURRENT
|
Fixed | TEST |
Fri Apr 12 12:17:51 2019 |
OttoH.V. | OTHER | Hardware | N/A | HVM_ERROR |
*** hvm watcher error ***
FP_DC1_w2 Slot: 2 (A1821HMP) Channel:1 Vmon: 9 V Imon: 0 uA Status: INTERNAL TRIP
|