|
Fixed, e768s, Thu Jul 18 00:16:58 2019, OttoRun, RUN, General, N/A, Run75
|
*************************
Run : 75
*************************
Start at 2019-07-17 22:06:59.976407
Time calibrator starting from MG3
strip by strip
Range 640 ns
Period 160 ns
Stop at 2019-07-18 00:16:59.664044
Stop comment:
Stop at 2019-07-18 00:17:01.189328
Stop comment:
Stop at 2019-07-18 10:44:37.670485
Stop comment: |
|
Fixed, e768s, Thu Jul 18 10:44:52 2019, OttoRun, RUN, General, N/A, Run81
|
*************************
Run : 81
*************************
Start at 2019-07-18 04:21:23.813605
Time calibrator starting from MG3
strip by strip
Range 640 ns
Period 160 ns |
|
Fixed, e768s, Thu Jul 18 10:44:53 2019, OttoRun, RUN, General, N/A, Run78
|
*************************
Run : 78
*************************
Start at 2019-07-18 01:14:14.943434
Time calibrator starting from MG3
strip by strip
Range 640 ns
Period 160 ns |
|
Fixed, e768s, Thu Jul 18 10:44:58 2019, OttoRun, RUN, General, N/A, Run80
|
*************************
Run : 80
*************************
Start at 2019-07-18 03:18:57.828894
Time calibrator starting from MG3
strip by strip
Range 640 ns
Period 160 ns |
|
Fixed, e768s, Thu Jul 18 10:45:00 2019, OttoRun, RUN, General, N/A, Run79
|
*************************
Run : 79
*************************
Start at 2019-07-18 02:16:37.027826
Time calibrator starting from MG3
strip by strip
Range 640 ns
Period 160 ns
Stop at 2019-07-18 10:45:16.248349
Stop comment:
Stop at 2019-07-18 10:45:35.922721
Stop comment:
Stop at 2019-07-18 10:45:49.689858
Stop comment: |
|
Fixed, e768s, Thu Jul 18 11:48:01 2019, OttoRun, RUN, General, N/A, Run88
|
*************************
Run : 88
*************************
Start at 2019-07-18 11:38:21.522541
Time calibrator starting from MG3
strip by strip
Range 640 ns
Period 160 ns
Stop at 2019-07-18 11:48:02.899351
Stop comment:
Stop at 2019-07-18 13:20:09.134730
Stop comment: |
|
Fixed, e768s, Thu Jul 18 11:52:59 2019, Marlène, OTHER, Hardware, N/A, Division of SQUARE & MUST2
|
MUST2 DIV is now 10 (input 7 of GMT)
The OR of the squares is divided by 10 and goes to channel 9 of GMT. |
|
Fixed, e768s, Thu Jul 18 13:28:04 2019, OttoRun, RUN, General, N/A, Run89
|
*************************
Run : 89
*************************
Start at 2019-07-18 13:27:24.605901
Time calibrator only for MG10 (square detector)
strip by strip
Range 640 ns
Period 160 ns
Detector HT OFF (no bias) |
|
Fixed, e768s, Thu Jul 18 14:32:16 2019, OttoRun, RUN, General, N/A, Run90
|
*************************
Run : 90
*************************
Start at 2019-07-18 14:29:52.556406
Time calibrator only for MG10 (square detector)
strip by strip
Range 640 ns
Period 160 ns
Stop at 2019-07-18 14:32:18.040679
Stop comment:
Stop at 2019-07-18 15:33:35.660664
Stop comment: |
Fixed, e768s, Thu Jul 18 14:38:04 2019, mugast, GRIT, General, N/A, time calibrator for MG10 X 
|
| Here is the plot |
|
Fixed, e768s, Thu Jul 18 16:37:18 2019, OttoRun, RUN, General, N/A, Run91
|
*************************
Run : 91
*************************
Start at 2019-07-18 16:36:35.878985
Pedestal calibration of MUGAST /MUST2 detectors
Internal Pulser on channel 1 of Mate 1 X
Stop at 2019-07-18 16:41:35.360463
Stop comment: |
|
Fixed, e768s, Thu Jul 18 16:43:40 2019, OttoRun, RUN, General, N/A, Run92
|
*************************
Run : 92
*************************
Start at 2019-07-18 16:42:56.991168
Junk ! pedestal suppression was only for MUVI2 and MUVI3
Pedestal calibration of MUGAST /MUST2 detectors WITHOUT PEDESTAL ALIGNMENT
Internal Pulser on channel 1 of Mate 1 X
Stop at 2019-07-18 16:46:32.092787
Stop comment: |
|
Fixed, e768s, Thu Jul 18 16:51:13 2019, OttoRun, RUN, General, N/A, Run93
|
*************************
Run : 93
*************************
Start at 2019-07-18 16:51:02.999421
Pedestal calibration of MUGAST /MUST2 detectors WITHOUT PEDESTAL ALIGNMENT
Internal Pulser on channel 1 of Mate 1 X
Correct file
Stop at 2019-07-18 16:59:04.056903
Stop comment: |
|
Fixed, e768s, Thu Jul 18 17:12:35 2019, OttoRun, RUN, General, N/A, Run94
|
*************************
Run : 94
*************************
Start at 2019-07-18 17:11:31.161368
Pedestal calibration of MUGAST /MUST2 detectors WITHOUT PEDESTAL ALIGNMENT
Internal Pulser on channel 1 of Mate 1 X
Try with new pedestals of MG3 (measured at 17h11 and saved as pedestal_muvi2sec2_18juil19)
Previous pedestals were saved as pedestal_muvi2sec2
Stop at 2019-07-18 17:21:20.999926
Stop comment:
Stop at 2019-07-19 00:01:38.322738
Stop comment:
Stop at 2019-07-19 00:01:38.721275
Stop comment:
Stop at 2019-07-19 00:01:38.904181
Stop comment:
Stop at 2019-07-19 00:01:39.088224
Stop comment: |
|
Fixed, e768s, Thu Jul 18 19:40:11 2019, iulian, OFFLINE, General, LiF, Ex in 19F from run 72
|
Excitation energy spectra in 19F obtained by conditioning Z==9 and (A/Q*8-19)<0.3 in Vamos for
MG5
MG11
Trapezoidal detectors
All backward detectors |
|
Fixed, e768s, Thu Jul 18 22:10:58 2019, Jenn, OTHER, General, , Previous Papers
|
|
|
Fixed, e768s, Thu Jul 18 22:11:57 2019, Franco, OFFLINE, General, , Identification in Mugast
|
Attached the spectra obtained in Mugast for run_0072_0_agata.root.
The colored ones are obtained simply asking for multiplicity 1, the black points are obtained
asking also for Z=9 (F) and for A=20 in VAMOS with the condition abs(mM_Q2*8-20)<0.5. |
|
Fixed, e768s, Thu Jul 18 22:50:58 2019, iulian, Jenn, Franco, OFFLINE, General, LiF, Ex in 19F from run 72
|
| Gamma energy vs excitation energy in 19F with all backward detectors for run 0072_0 |
|
Fixed, e768s, Thu Jul 18 23:35:26 2019, mugast, RUN, General, N/A, run 102
|
VAMOS ref run:
Brho = 0.5854 Tm
P(CHIO) = 45 mbar
P(drift) = 6 mbar
hole = 7mm
I(15O) = 1.5e3 pps |
|
Fixed, e768s, Thu Jul 18 23:42:44 2019, mugast, RUN, General, , run 103 -> Brho scan
|
|
|