| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Fixed | e768s |
Tue Jul 16 09:18:07 2019 |
OttoRun | RUN | General | N/A | Run29 |
*************************
Run : 29
*************************
Start at 2019-07-16 00:35:09.645821
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:18:09 2019 |
OttoRun | RUN | General | N/A | Run27 |
*************************
Run : 27
*************************
Start at 2019-07-15 23:56:24.751783
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:32:01 2019 |
OttoRun | RUN | General | N/A | Run21 |
*************************
Run : 21
*************************
Start at 2019-07-15 22:00:52.293258
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:32:01 2019 |
OttoRun | RUN | General | N/A | Run25 |
*************************
Run : 25
*************************
Start at 2019-07-15 23:17:52.495715
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:32:02 2019 |
OttoRun | RUN | General | N/A | Run19 |
*************************
Run : 19
*************************
Start at 2019-07-15 21:21:41.309961
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s
Stop at 2019-07-16 09:32:03.733557
Stop comment:
Stop at 2019-07-16 09:32:04.830799
Stop comment:
Stop at 2019-07-16 09:32:05.405129
Stop comment: |
| Fixed | e768s |
Tue Jul 16 09:32:06 2019 |
OttoRun | RUN | General | N/A | Run24 |
*************************
Run : 24
*************************
Start at 2019-07-15 22:58:34.115263
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s
Stop at 2019-07-16 09:32:07.900270
Stop comment:
Stop at 2019-07-16 09:32:08.186319
Stop comment:
Stop at 2019-07-16 09:32:08.404715
Stop comment:
Stop at 2019-07-16 09:32:08.595475
Stop comment:
Stop at 2019-07-16 09:32:08.836126
Stop comment:
Stop at 2019-07-16 09:32:09.032791
Stop comment: |
| Fixed | e768s |
Tue Jul 16 09:32:10 2019 |
OttoRun | RUN | General | N/A | Run26 |
*************************
Run : 26
*************************
Start at 2019-07-15 23:37:09.715822
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:32:11 2019 |
OttoRun | RUN | General | N/A | Run23 |
*************************
Run : 23
*************************
Start at 2019-07-15 22:39:15.135130
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:32:12 2019 |
OttoRun | RUN | General | N/A | Run20 |
*************************
Run : 20
*************************
Start at 2019-07-15 21:41:05.032091
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:32:13 2019 |
OttoRun | RUN | General | N/A | Run18 |
*************************
Run : 18
*************************
Start at 2019-07-15 21:02:24.501987
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s
Stop at 2019-07-16 09:32:41.677146
Stop comment: |
| Fixed | e768s |
Tue Jul 16 09:32:13 2019 |
OttoRun | RUN | General | N/A | Run22 |
*************************
Run : 22
*************************
Start at 2019-07-15 22:19:49.102066
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:44:53 2019 |
Franco | RUN | General | 3-alpha | Run306 |
Attached the calibrated spectra for Mugast and MUST2 for run 0306 and the raw spectra of Mugast.
| OttoRun wrote: | *************************
Run : 306
*************************
Start at 2019-07-12 17:17:19.657074
3 alpha calibration run
+ MM2 masks
+ suppressed pedestals (new pedestal for all trap detectors)
Square detectors:
+ MG10: not biased
+ MG9 removed
Stop at 2019-07-14 21:18:42.648096
Stop comment: stopping for heating cooling system after unbiasing MUGAST
Stop at 2019-07-15 15:36:28.594934
Stop comment: type your message here
Stop at 2019-07-15 16:25:22.582232
Stop comment: type your message here
Stop at 2019-07-15 18:02:50.677903
Stop comment: changing ADC channel for T_AGATA_HF |
|
| Attachment 1: run0306_mugast_cal.png
|
|
| Attachment 2: run0306_must2_cal.png
|
|
| Attachment 3: run0306_mugast_raw.png
|
|
| Fixed | e768s |
Tue Jul 16 09:51:56 2019 |
Franco | RUN | General | 3-alpha | Run301 |
Attached the dat file with the position of the pedestals for each strip of MG3_X
that can be used to correct the pedestal problem of MG3_X in later runs (from run O306).
| Franco wrote: | Attached the calibrated spectra for MUST2 and Mugast for run 301.
| OttoRun wrote: | *************************
Run : 301
*************************
Start at 2019-07-11 15:07:27.670320
3 alpha calibration run
+ without MM2 masks
+ non suppressed pedestals
Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked
Stop at 2019-07-11 16:52:55.206383
Stop comment: stopping run to put pedestal suppression |
|
|
| Attachment 1: pedestals_MG3_STRX_E_RAW.dat
|
#Strip Pedestal pos.
1 8192.3
2 8192.04
3 8192.01
4 8192.3
5 8192.07
6 8192.05
7 8192.53
8 8191.71
9 8191.33
10 8190.86
11 8190.64
12 8190.34
13 8189.44
14 8188.99
15 8437.76
16 8437.76
17 8192.91
18 8192.76
19 8192.5
20 8192.05
21 8192.05
22 8192.04
23 8191.66
24 8191.9
25 8191.88
26 8191.93
27 8191.77
28 8191.15
29 8191.19
30 8191.39
31 8191.63
32 8192.03
33 8192.28
34 8192.46
35 8191.93
36 8191.42
37 8192.15
38 8192.55
39 8192.74
40 8192.58
41 8192.57
42 8193.06
43 8192.91
44 8192.55
45 8192.46
46 8192.66
47 8192.61
48 8192.83
49 8192.98
50 8192.61
51 8192.45
52 8192.87
53 8192.83
54 8192.57
55 8192.57
56 8192.46
57 8192.59
58 8192.48
59 8192.53
60 8192.54
61 8192.65
62 8192.68
63 8192.57
64 8192.7
65 8191.82
66 8190.82
67 8191.16
68 8191.34
69 8191.22
70 8191.68
71 8191.89
72 8191.74
73 8191.69
74 8192.04
75 8191.72
76 8191.75
77 8191.83
78 8192
79 8191.93
80 8191.85
81 8192.37
82 8192.54
83 8192.52
84 8192.29
85 8192.19
86 8191.81
87 8192.06
88 8192.51
89 8192.55
90 8192.27
91 8192.24
92 8192.35
93 8192.07
94 8192.51
95 8191.28
96 8190.31
97 8191.3
98 8191.94
99 8192.28
100 8192.65
101 8192.4
102 8191.86
103 8191.55
104 8191.57
105 8191.67
106 8191.76
107 8191.97
108 8191.58
109 8191.6
110 8191.96
111 8191.77
112 8191.89
113 8192.44
114 8192.58
115 8192.51
116 8192.37
117 8192.06
118 8191.6
119 8191.88
120 8191.7
121 8191.5
122 8191.73
123 8191.6
124 8191.4
125 8191.67
126 8191.94
127 8191.52
128 8191.83
|
| Fixed | e768s |
Tue Jul 16 11:27:23 2019 |
OttoRun | RUN | General | N/A | Run41 |
*************************
Run : 41
*************************
Start at 2019-07-16 11:27:07.354331
fsc / calibT run on each channel
Stop at 2019-07-16 11:28:43.118010
Stop comment: fail |
| Fixed | e768s |
Tue Jul 16 11:30:47 2019 |
OttoRun | RUN | General | N/A | Run42 |
*************************
Run : 42
*************************
Start at 2019-07-16 11:30:38.017124
fsc / calibT run on each channel
Stop at 2019-07-16 11:33:11.684930
Stop comment: |
| Fixed | e768s |
Tue Jul 16 11:37:12 2019 |
OttoRun | RUN | General | N/A | Run44 |
*************************
Run : 44
*************************
Start at 2019-07-16 11:37:04.972592
fsc / calibT run on each channel
BAD BAD
Stop at 2019-07-16 12:53:57.854101
Stop comment: |
| Fixed | e768s |
Tue Jul 16 12:10:05 2019 |
Francois | BEAM | General | LiF | beam intensity, normalisation, elastic scattering 7Li |
In 2005, the 15O1+ beam was measured at 6x10^7 pps after the CIME cyclotron, contaminated with ~nAe of 15N1+.
After stripper (aluminium stripper at LISE) the purity was 97 % of 15O8+ with 3 % of 15N8+.
The 15N(7Li,7Li)15N cross section has been measured at 27.3 MeV (18.6 MeV CM) (see images). It is Rutherford at angles <10° CM.
In the present experiment, the energy CM is 22.4 MeV CM.
10°CM correspond to 85° in lab, 7Li with energy ~ 0.46 MeV.
Conclusions:
- it is not possible to normalise to the Rutherford cross section of 7Li
- expected beam intensity at nominal should be > 10^7 pps (a factor less than 2 between 1+ and 3+, 40% of 8+ after stripper) |
| Attachment 1: scattering.jpg
|
|
| Attachment 2: scattering2.jpg
|
|
| Fixed | e768s |
Tue Jul 16 12:54:03 2019 |
OttoRun | RUN | General | N/A | Run45 |
*************************
Run : 45
*************************
Start at 2019-07-16 12:53:55.696279
fsc / calibT run on each channel |
| Fixed | e768s |
Tue Jul 16 14:11:50 2019 |
OttoRun | RUN | General | N/A | Run46 |
*************************
Run : 46
*************************
Start at 2019-07-16 13:57:59.983802
fsc / calibT run on each channel
Stop at 2019-07-16 14:11:51.539190
Stop comment: |
| Fixed | e768s |
Tue Jul 16 15:13:01 2019 |
Jenn, DIego | VAMOS | General | | Brho |
|
| Attachment 1: E768_BRHO.pdf
|
|