MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 26 of 132  Not logged in MUGAST
 Find |  Login 
 Full | Summary | Threaded | Show attachments  Show only new entries   2636 Entries 
Goto page Previous  1, 2, 3 ... 25, 26, 27 ... 130, 131, 132   Next  
Status ExpNbrdown Date Author Type Category Target-Source Subject
Fixede768s Tue Jul 16 09:18:07 2019 OttoRunRUNGeneralN/ARun29
*************************
Run : 29
*************************

Start at 2019-07-16 00:35:09.645821

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:18:09 2019 OttoRunRUNGeneralN/ARun27
*************************
Run : 27
*************************

Start at 2019-07-15 23:56:24.751783

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:01 2019 OttoRunRUNGeneralN/ARun21
*************************
Run : 21
*************************

Start at 2019-07-15 22:00:52.293258

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:01 2019 OttoRunRUNGeneralN/ARun25
*************************
Run : 25
*************************

Start at 2019-07-15 23:17:52.495715

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:02 2019 OttoRunRUNGeneralN/ARun19
*************************
Run : 19
*************************

Start at 2019-07-15 21:21:41.309961

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s

Stop at 2019-07-16 09:32:03.733557
Stop comment:

Stop at 2019-07-16 09:32:04.830799
Stop comment:

Stop at 2019-07-16 09:32:05.405129
Stop comment:
Fixede768s Tue Jul 16 09:32:06 2019 OttoRunRUNGeneralN/ARun24
*************************
Run : 24
*************************

Start at 2019-07-15 22:58:34.115263

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s

Stop at 2019-07-16 09:32:07.900270
Stop comment:

Stop at 2019-07-16 09:32:08.186319
Stop comment:

Stop at 2019-07-16 09:32:08.404715
Stop comment:

Stop at 2019-07-16 09:32:08.595475
Stop comment:

Stop at 2019-07-16 09:32:08.836126
Stop comment:

Stop at 2019-07-16 09:32:09.032791
Stop comment:
Fixede768s Tue Jul 16 09:32:10 2019 OttoRunRUNGeneralN/ARun26
*************************
Run : 26
*************************

Start at 2019-07-15 23:37:09.715822

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:11 2019 OttoRunRUNGeneralN/ARun23
*************************
Run : 23
*************************

Start at 2019-07-15 22:39:15.135130

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:12 2019 OttoRunRUNGeneralN/ARun20
*************************
Run : 20
*************************

Start at 2019-07-15 21:41:05.032091

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:32:13 2019 OttoRunRUNGeneralN/ARun18
*************************
Run : 18
*************************

Start at 2019-07-15 21:02:24.501987

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s

Stop at 2019-07-16 09:32:41.677146
Stop comment:
Fixede768s Tue Jul 16 09:32:13 2019 OttoRunRUNGeneralN/ARun22
*************************
Run : 22
*************************

Start at 2019-07-15 22:19:49.102066

fsc / calibT run

internal pulser frequency now set to 300 Hz (was about 1 kHz before)

GMT: MUGAST (square detector not biased) + MUST2

Time calibrator:
range -> 640 ns
freq. -> 20 ns

fsc modified to wait 60s instead of 10s
Fixede768s Tue Jul 16 09:44:53 2019 FrancoRUNGeneral3-alphaRun306
Attached the calibrated spectra for Mugast and MUST2 for run 0306 and the raw spectra of Mugast.


OttoRun wrote:
*************************
Run : 306
*************************

Start at 2019-07-12 17:17:19.657074

3 alpha calibration run
+ MM2 masks
+ suppressed pedestals (new pedestal for all trap detectors)

Square detectors:
+ MG10: not biased
+ MG9 removed

Stop at 2019-07-14 21:18:42.648096
Stop comment: stopping for heating cooling system after unbiasing MUGAST

Stop at 2019-07-15 15:36:28.594934
Stop comment: type your message here

Stop at 2019-07-15 16:25:22.582232
Stop comment: type your message here

Stop at 2019-07-15 18:02:50.677903
Stop comment: changing ADC channel for T_AGATA_HF
Fixede768s Tue Jul 16 09:51:56 2019 FrancoRUNGeneral3-alphaRun301
Attached the dat file with the position of the pedestals for each strip of MG3_X
that can be used to correct the pedestal problem of MG3_X in later runs (from run O306).



Franco wrote:
Attached the calibrated spectra for MUST2 and Mugast for run 301.


OttoRun wrote:
*************************
Run : 301
*************************

Start at 2019-07-11 15:07:27.670320

3 alpha calibration run
+ without MM2 masks
+ non suppressed pedestals

Square detectors:
+ MG10: all X strips masked; mate 14 & 16 masked
+ MG9: all X & Y strips masked

Stop at 2019-07-11 16:52:55.206383
Stop comment: stopping run to put pedestal suppression
Fixede768s Tue Jul 16 11:27:23 2019 OttoRunRUNGeneralN/ARun41
*************************
Run : 41
*************************

Start at 2019-07-16 11:27:07.354331

fsc / calibT run on each channel

Stop at 2019-07-16 11:28:43.118010
Stop comment: fail
Fixede768s Tue Jul 16 11:30:47 2019 OttoRunRUNGeneralN/ARun42
*************************
Run : 42
*************************

Start at 2019-07-16 11:30:38.017124

fsc / calibT run on each channel

Stop at 2019-07-16 11:33:11.684930
Stop comment:
Fixede768s Tue Jul 16 11:37:12 2019 OttoRunRUNGeneralN/ARun44
*************************
Run : 44
*************************

Start at 2019-07-16 11:37:04.972592

fsc / calibT run on each channel





BAD BAD

Stop at 2019-07-16 12:53:57.854101
Stop comment:
Fixede768s Tue Jul 16 12:10:05 2019 FrancoisBEAMGeneralLiFbeam intensity, normalisation, elastic scattering 7Li
In 2005, the 15O1+ beam was measured at 6x10^7 pps after the CIME cyclotron, contaminated with ~nAe of 15N1+.
After stripper (aluminium stripper at LISE) the purity was 97 % of 15O8+ with 3 % of 15N8+.

The 15N(7Li,7Li)15N cross section has been measured at 27.3 MeV (18.6 MeV CM) (see images). It is Rutherford at angles <10° CM.

In the present experiment, the energy CM is 22.4 MeV CM.
10°CM correspond to 85° in lab, 7Li with energy ~ 0.46 MeV.

Conclusions:
- it is not possible to normalise to the Rutherford cross section of 7Li
- expected beam intensity at nominal should be > 10^7 pps (a factor less than 2 between 1+ and 3+, 40% of 8+ after stripper)
Fixede768s Tue Jul 16 12:54:03 2019 OttoRunRUNGeneralN/ARun45
*************************
Run : 45
*************************

Start at 2019-07-16 12:53:55.696279

fsc / calibT run on each channel
Fixede768s Tue Jul 16 14:11:50 2019 OttoRunRUNGeneralN/ARun46
*************************
Run : 46
*************************

Start at 2019-07-16 13:57:59.983802

fsc / calibT run on each channel

Stop at 2019-07-16 14:11:51.539190
Stop comment:
Fixede768s Tue Jul 16 15:13:01 2019 Jenn, DIegoVAMOSGeneral Brho
Goto page Previous  1, 2, 3 ... 25, 26, 27 ... 130, 131, 132   Next  

ELOG Home Page