| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Fixed | e768s |
Mon Jul 15 19:56:52 2019 |
OttoRun | RUN | General | 3-alpha | Run6 |
*************************
Run : 6
*************************
Start at 2019-07-15 17:39:19.237140
3 alpha calibration run
+ MM2 masks
+ suppressed pedestals (new pedestal for all trap detectors)
Square detectors:
+ MG10: not biased
+ MG9 removed |
| Fixed | e768s |
Mon Jul 15 19:59:30 2019 |
Marlène, Nicolas, Serge | RUN | General | N/A | Run10 - fsc |
*************************
Run : 10
*************************
Start at 2019-07-15 19:57:41.031967
fsc / calibT run
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns |
| Fixed | e768s |
Mon Jul 15 20:07:48 2019 |
OttoRun | RUN | General | N/A | Run11 |
*************************
Run : 11
*************************
Start at 2019-07-15 20:03:52.664898
fsc / calibT run
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
Stop at 2019-07-15 20:09:19.003266
Stop comment: stop because too many overflow and too little statistics |
| Fixed | e768s |
Mon Jul 15 20:12:30 2019 |
OttoRun | RUN | General | N/A | Run12 |
*************************
Run : 12
*************************
Start at 2019-07-15 20:11:56.531359
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
Stop at 2019-07-15 20:17:56.763955
Stop comment: |
| Fixed | e768s |
Mon Jul 15 20:18:07 2019 |
Marlène, Nicolas, Serge | RUN | General | N/A | Run13 - fsc |
*************************
Run : 13
*************************
Start at 2019-07-15 20:18:02.650063
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
Stop at 2019-07-15 20:23:54.304478
Stop comment: type your message here |
| Fixed | e768s |
Mon Jul 15 20:24:01 2019 |
OttoRun | RUN | General | N/A | Run14 |
*************************
Run : 14
*************************
Start at 2019-07-15 20:23:58.790182
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
Stop at 2019-07-15 20:30:02.695121
Stop comment: |
| Fixed | e768s |
Mon Jul 15 20:30:04 2019 |
OttoRun | RUN | General | N/A | Run15 |
*************************
Run : 15
*************************
Start at 2019-07-15 20:29:59.325702
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
Stop at 2019-07-15 20:35:53.451006
Stop comment: type your message here |
| Fixed | e768s |
Mon Jul 15 20:36:04 2019 |
OttoRun | RUN | General | N/A | Run16 |
*************************
Run : 16
*************************
Start at 2019-07-15 20:36:00.148912
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
Stop at 2019-07-15 20:41:36.377502
Stop comment:
Stop at 2019-07-15 20:41:59.835741
Stop comment: type your message here |
| Fixed | e768s |
Mon Jul 15 20:43:18 2019 |
OttoRun | RUN | General | N/A | Run17 |
*************************
Run : 17
*************************
Start at 2019-07-15 20:42:55.992890
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s
Stop at 2019-07-16 09:17:35.499644
Stop comment:
Stop at 2019-07-16 09:17:41.162065
Stop comment: |
| Fixed | e768s |
Tue Jul 16 09:17:42 2019 |
OttoRun | RUN | General | N/A | Run40 |
*************************
Run : 40
*************************
Start at 2019-07-16 04:08:02.116803
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:17:43 2019 |
OttoRun | RUN | General | N/A | Run39 |
*************************
Run : 39
*************************
Start at 2019-07-16 03:48:35.323862
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:17:45 2019 |
OttoRun | RUN | General | N/A | Run37 |
*************************
Run : 37
*************************
Start at 2019-07-16 03:09:51.603303
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:17:46 2019 |
OttoRun | RUN | General | N/A | Run34 |
*************************
Run : 34
*************************
Start at 2019-07-16 02:11:51.733892
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:17:47 2019 |
OttoRun | RUN | General | N/A | Run32 |
*************************
Run : 32
*************************
Start at 2019-07-16 01:33:10.913041
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:17:48 2019 |
OttoRun | RUN | General | N/A | Run30 |
*************************
Run : 30
*************************
Start at 2019-07-16 00:54:27.174959
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:17:49 2019 |
OttoRun | RUN | General | N/A | Run28 |
*************************
Run : 28
*************************
Start at 2019-07-16 00:15:50.617493
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s
Stop at 2019-07-16 09:17:51.288072
Stop comment:
Stop at 2019-07-16 09:17:51.824283
Stop comment:
Stop at 2019-07-16 09:17:52.302740
Stop comment:
Stop at 2019-07-16 09:17:52.781598
Stop comment: |
| Fixed | e768s |
Tue Jul 16 09:18:01 2019 |
OttoRun | RUN | General | N/A | Run38 |
*************************
Run : 38
*************************
Start at 2019-07-16 03:29:08.548242
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:18:03 2019 |
OttoRun | RUN | General | N/A | Run36 |
*************************
Run : 36
*************************
Start at 2019-07-16 02:50:35.863628
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:18:05 2019 |
OttoRun | RUN | General | N/A | Run33 |
*************************
Run : 33
*************************
Start at 2019-07-16 01:52:31.894883
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |
| Fixed | e768s |
Tue Jul 16 09:18:06 2019 |
OttoRun | RUN | General | N/A | Run31 |
*************************
Run : 31
*************************
Start at 2019-07-16 01:13:51.816227
fsc / calibT run
internal pulser frequency now set to 300 Hz (was about 1 kHz before)
GMT: MUGAST (square detector not biased) + MUST2
Time calibrator:
range -> 640 ns
freq. -> 20 ns
fsc modified to wait 60s instead of 10s |