MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO
  MUGAST, Page 130 of 132  Not logged in MUGAST
Fixed, TEST, Tue Mar 9 08:53:34 2021, OttoH.V., OTHER, Hardware, N/A, HVM_SUMMARY 
[SIZE=5][COLOR=green][B]*** hvm watcher summary ***[/B] [/COLOR][/SIZE] 
 [SIZE=2][COLOR=green]+10V/t1234  [/COLOR] Slot: [COLOR=blue]3  [/COLOR] (A1516B) Channel:[COLOR=blue]5 [/COLOR]  Vmon: [COLOR=blue] 9.99 V  [/COLOR] Imon:
[COLOR=blue]0.159 A [/COLOR] Status: [COLOR=green]On[/COLOR]
Fixed, TEST, Tue Mar 9 08:53:34 2021, OttoH.V., OTHER, Hardware, N/A, HVM_SUMMARY 
[SIZE=5][COLOR=green][B]*** hvm watcher summary ***[/B] [/COLOR][/SIZE] 
 [SIZE=2][COLOR=green]+10v/mg     [/COLOR] Slot: [COLOR=blue]5  [/COLOR] (A1516B) Channel:[COLOR=blue]5 [/COLOR]  Vmon: [COLOR=blue]   10 V  [/COLOR] Imon:
[COLOR=blue]0.407 A [/COLOR] Status: [COLOR=green]On[/COLOR]
Fixed, TEST, Tue Mar 9 08:53:35 2021, OttoH.V., OTHER, Hardware, N/A, HVM_SUMMARY 
[SIZE=5][COLOR=green][B]*** hvm watcher summary ***[/B] [/COLOR][/SIZE] 
 [SIZE=2][COLOR=green]            [/COLOR] Slot: [COLOR=blue]8  [/COLOR] (A1821H) Channel:[COLOR=blue]1 [/COLOR]  Vmon: [COLOR=blue]    0 V  [/COLOR] Imon:
[COLOR=blue]    0 uA[/COLOR] Status: [COLOR=pink]Off[/COLOR]
Fixed, , Tue Jan 22 11:15:15 2019, Marlène, GRIT, General, N/A, Square detectors MG9C_disabled_channels__no_crazy_ORD.pngMG9C_disabled_channels__no_crazy_ORD_moredetailed.pngMG9C_piedestal_of_disabled_channels_Y.png
MG9C (thin square detector coupled with thick square detector unplugged) noisy
On X channels --> no noise problem ( about 100 ORD in the dark)
On Y channels --> MATE 10 & 11 noisy ! (see picture below with noisy Y piedestals)
Fixed, , Wed Jan 23 12:24:10 2019, Marlène, GRIT, General, , Change cable MG1T - Exchange of detectors named MG9C & MG10C 
23/01/19

Change of the HT/BT cable of MG1T (the one that had a short cut before when the chamber was closed)
Fixed, , Fri Jan 25 17:02:25 2019, Marlène, GRIT, General, , Detectors numbering MUGAST_detectors.pdf
 
Fixed, , Thu Feb 14 08:50:58 2019, Marlene, GRIT, General, 3-alpha, RUN 27 8x
RUN 27 on 14th of feb.
3 alpha source (one in front of trap., one in front of square detectors)
Fixed, , Thu Feb 14 15:30:14 2019, Marlene Daniele Jenny, GRIT, General, 3-alpha, RUN 28 3alpha_sourceMG03XY._OKpng3alpha_sourceMG11XY.png3alpha_sourceMG01XY_OK.png
RUN 28 14th Feb
3 alpha source on MG11A, MG3T, MG1T
Fixed, , Fri Feb 15 15:31:28 2019, Marlène, GRIT, General, N/A, Detectors bias 
 
Fixed, , Mon Mar 4 17:22:29 2019, Marlene, GRIT, General, , Temperature on MUFEE MUST2 13deg 8x
Temperature given by DAS on MUVI3 (MUST2) 
screenshots before run
after run : same values 
Fixed, , Tue Mar 12 10:21:17 2019, Marlène, MUST2, General, , Debug Calimero Y test_GECO_masquage_mate2&10activees_seulement.png
Debug of Calimero

test of channels (mate) masking : OK with DAS, OK with GECCO (see attachment) when done in the "disable channels" of GECCO
Fixed, , Tue Mar 19 19:35:53 2019, marlene, GRIT, General, , RUN 98 3alpha source all detectors 
RUN 98
3 alpha source
all detectors (trap,square, MUST2,annular)
Fixed, , Thu Mar 28 18:29:04 2019, marlene valerian, GRIT, General, 3-alpha, RUN 147 3alpha source overnight all detectors -4deg 
[SIZE=3]RUN 147  start@ 18:30

3 alpha source over night
Fixed, , Thu Apr 4 17:55:47 2019, Marlène, GRIT, General, , Scalers 
The scalers are

Scaler 1:
Fixed, , Thu Apr 4 22:48:57 2019, mugast, GRIT, General, N/A, 16O beam tuning PCP photo_1.JPGphoto_2.JPG
 
Fixed, , Fri Apr 5 19:05:56 2019, Marlène Nicolas, GRIT, General, , Brho beam & 17O 
Brho of  16O @ 6 MeV/A after 1mg/cm2 = 0.68906
Brho of 17O for g.s. after 1 mg/cm2=0.71065
Brho of 17O @ 871 keV after 1mg/cm2=0.70831
Fixed, , Mon Apr 8 07:54:53 2019, iulian, MUST2, Hardware, , end alpha contamination run bilan_run262_bck_mugast4.pngbilan_run262_bck_mugast3.pngbilan_run262_bck_mugast2.pngbilan_run262_bck_mugast1.png
Problem M3 EY , moving piedestal... See below
Alfa spectra have changed, no longer continuous excepting partially MM2.
Fixed, , Mon Apr 8 08:01:04 2019, iulian, MUST2, Hardware, , swiching off HV & BT (in that order) HV_mugast_end1.pngHV_mugast_end2.pngHV_mugast_end3.pngHV_mugast_end4.png
switching off HV & BT now :
>lpcgrit
>hvm_print MUST2
Fixed, , Tue Apr 9 21:47:20 2019, Marlene Valerian, GRIT, General, , FSC time calibration 9th april evening FSC_calib_09042019.png
Snapshot of FSC calibration just before experiment

The noisy MG detectors are still there but otherwise most of them are OK
Fixed, , Thu Apr 11 05:03:13 2019, Marlène, RUN, Hardware, CH2, TO DO list 
- 2 TACS are not working: 
[LIST]
[*] T_Si_CATS1 (stop should be CATS n FAG --> to be checked)

ELOG Home Page