| Status |
ExpNbr |
Date |
Author |
Type |
Category |
Target-Source |
Subject |
| Fixed | e768s |
Mon Jul 29 17:49:18 2019 |
Freddy, Sylvain | RUN | General | LiF | Beam status |
| At about 17:15 beam suddenly stopped. PCP operators are investigating the issue. |
| Fixed | e793s |
Mon Mar 15 02:44:06 2021 |
Sarah, Louis, Charlie | RUN | General | CD2 | Beam returned at 02:45 and stabilised by PCP |
| The PCP team were not able to learn anything new about the state of the source from their diagnostic tests, but they told us that they have stabilized the beam so there should be less fluctuations. They have also opened the slits to their maximum, which now gives us 5e5 pps. |
| Fixed | e768s |
Mon Jul 22 08:29:19 2019 |
Faïrouz, Sylvain, Francois et Franck, Bertrand | BEAM | General | LiF | Beam profile updated |
To solve the very high counting rate observed on AGATA (and on MUST2 with a lesser degree), the beam was retuned.
After inspection of the beam profile in VAMOS, Bertrand tuned the vertical steerers G1.DC21-VE (from 0.5 -> 0.0A). The consequence is a shift of 2mm in vertical position at the target position.
Everything seems back to normal. |
| Attachment 1: index.jpg
|
|
| Attachment 2: scalers_run124_0.png
|
|
| Fixed | e768s |
Sun Jul 28 01:49:25 2019 |
Jenn and Andres | ONLINE | General | LiF | Beam profile and scaler run 154 overnight |
OR VAMOS ~ 500
BEAM Profiler ~ 1.4e7 |
| Attachment 1: Scalers_run154_6.png
|
|
| Attachment 2: Beam_profiler.jpg
|
|
| Fixed | e768s |
Mon Jul 29 15:58:53 2019 |
Freddy, Sylvain | BEAM | General | N/A | Beam profile and scaler r156 |
| beam down to 3.4*10^6 pps at 16h00 (or VAMOS 200 pps) |
| Attachment 1: Scalers-run156_6.png
|
|
| Attachment 2: 20190729_155640.jpg
|
|
| Fixed | e768s |
Wed Jul 31 08:16:34 2019 |
Sylvain, Nicolas | BEAM | General | LiF | Beam profile and scaler at 08:00 |
|
| Attachment 1: index.jpg
|
|
| Attachment 2: scalers_run160_10.png
|
|
| Fixed | e768s |
Sat Jul 27 14:10:49 2019 |
Fairouz, Beyhan, Daniele | RUN | General | LiF | Beam profile and scaler 154 @ 14h10 |
| mugast |
| Attachment 1: Beam-profile-154-1.jpg
|
|
| Attachment 2: scaler-run154.png
|
|
| Attachment 3: 20190727_133807.jpg
|
|
| Attachment 4: IMG_3506.jpg
|
|
| Fixed | e768s |
Sat Jul 27 07:02:44 2019 |
Sylvain & Andrea | ONLINE | General | LiF | Beam profile and scaler |
|
| Fixed | e768s |
Mon Jul 22 11:42:22 2019 |
Marlène, François D, Franck | BEAM | General | LiF | Beam profile and intensity |
Intensity = 1.8e7 pps
Slight shifts in x and y compared to this morning 8:30
x : -1.1 mm
y : +1.7 mm |
| Attachment 1: IMG_20190722_113900.jpg
|
|
| Fixed | e768s |
Mon Jul 29 15:20:50 2019 |
Sylvain Andres, Freddy, Adrien, Franck | BEAM | General | LiF | Beam profile after beam intensity obtimisation |
| Beam recover at around 15:00 after beam optimisation by PCP |
| Attachment 1: index.jpg
|
|
| Fixed | e768s |
Wed Jul 31 03:22:42 2019 |
Freddy, Chloé | BEAM | General | | Beam profile (run160) @2h24 |
|
| Attachment 1: 20190731_022419.jpg
|
|
| Fixed | e768s |
Tue Jul 30 23:46:25 2019 |
Faïrouz & Ksenia | RUN | General | LiF | Beam profile & scalers (run160) @23h45 |
|
| Attachment 1: scalers_run160_5.png
|
|
| Attachment 2: 20190730_235130-23h54.jpg
|
|
| Fixed | e768s |
Tue Jul 30 21:36:43 2019 |
Faïrouz & Ksenia | RUN | General | LiF | Beam profile & scalers (run160) @21h36 |
|
| Attachment 1: 20190730_213330-21h35.jpg
|
|
| Attachment 2: scalers_run160_4.png
|
|
| Fixed | e768s |
Wed Jul 31 14:07:24 2019 |
Sylvain & Nicolas | BEAM | General | LiF | Beam profile & scalers |
|
| Attachment 1: 20190731_135809.jpg
|
|
| Fixed | e768s |
Sat Jul 20 14:32:18 2019 |
Nicolas | BEAM | General | LiF | Beam profile & intensity (run 117 @ 14h30) |
Beam intensity: 1.4e7 pps
VAMOS: ~ 1200 |
| Attachment 1: IMG_20190720_142852.jpg
|
|
| Fixed | e768s |
Mon Jul 22 10:01:12 2019 |
Franck, François D | BEAM | General | LiF | Beam profile |
Slight shift in vertical +1 mm (with respect to this morning at 8:30)?
Intensity = 1.7e7 pps |
| Attachment 1: IMG_20190722_095235.jpg
|
|
| Fixed | e768s |
Mon Jul 22 14:45:34 2019 |
François D, Franck | BEAM | General | LiF | Beam profile |
Intensity = 1.3e7 pps
Beam position shift compared to this morning 8:30
x: -1.8 mm
y: +3.3 mm |
| Attachment 1: Beam_profile_run125_22July2019_14h39.jpg
|
|
| Fixed | e768s |
Tue Jul 23 11:02:54 2019 |
Kseniia, Gilbert | BEAM | General | | Beam profile |
|
| Attachment 1: FF0E1C03-CD2A-4BAB-8E82-26422F7EB866.jpeg
|
|
| Attachment 2: Screenshot_from_2019-07-23_11-04-17.png
|
|
| Attachment 3: Screenshot_from_2019-07-23_11-04-05.png
|
|
| Fixed | e768s |
Sun Jul 28 04:22:15 2019 |
Jenn, Andres and Daniele | BEAM | General | N/A | Beam problems and DC trip |
- Updated from PCP about the problem with the beam: cyclotron went down and estimation of ~5h to have the beam back.
- After the beam went down, the Drift Chambers tripped making all the other biases go down (crate problem?). We tried to recover the biases but they don't go up. We decided not to call Diego at the moment, as the beam will take long to come back. We will call him when we have more news from PCP.
- Checked the water tray of MUGAST cooling system: seems ok. |
| Attachment 1: IMG_20190728_043633.jpg
|
|
| Fixed | e768s |
Sun Jul 28 14:57:26 2019 |
Franco & Sylvain | BEAM | General | N/A | Beam problems and DC trip |
The HV and the vacuum in VAMOS are now recovered and back to the normal values. The water tray is 20% filled and under control. Mugast voltages and currents seem all ok.
Latest news from PCP are that they are still tuning CSS1 and CSS2. Updates concerning the beam schedule are for the moment no more optimistic than before.
| Jenn, Andres and Daniele wrote: | - Updated from PCP about the problem with the beam: cyclotron went down and estimation of ~5h to have the beam back.
- After the beam went down, the Drift Chambers tripped making all the other biases go down (crate problem?). We tried to recover the biases but they don't go up. We decided not to call Diego at the moment, as the beam will take long to come back. We will call him when we have more news from PCP.
- Checked the water tray of MUGAST cooling system: seems ok. |
|