ELOG MUGAST

MUST2 SAMURAI_2018 S3-LEB-LPC SUPERNEMO MUGAST EXPAND SCALP GALATRON HiCARI VELO

MUGAST, Page 109 of 132

Not logged in

Find | Login

Full | Summary | Threaded | Collapse | Expand

2636 Entries

Goto page Previous 1, 2, 3 ... 108, 109, 110 ... 130, 131, 132 Next

Fixed, e768s, Mon Jul 15 14:29:47 2019, Marlčne, MUST2, General, , Masks for MUST2 & Kapton changed for MG5

Masks are now correctly mounted

All 4 kaptons from MG5 have been changed

Fixed, e768s, Thu Jul 18 11:52:59 2019, Marlčne, OTHER, Hardware, N/A, Division of SQUARE & MUST2

MUST2 DIV is now 10 (input 7 of GMT)

Fixed, e768s, Sun Jul 21 14:54:28 2019, Marlčne, RUN, General, , run 119 scalers

Fixed, e768s, Sun Jul 21 16:42:20 2019, Marlčne, OFFLINE, General, , Conversion of data from AGATA :update

When VAMOS VXI crashed (run 118) the Action file was recompiled.
As AGATA conversion is not copying the ACTION file for each run, it used the old version by default (from 16th of july).

Fixed, e768s, Sun Jul 21 17:02:25 2019, Marlčne, BEAM, General, , beam intensity in the afternoon

Fixed, e768s, Tue Jul 23 16:19:14 2019, Marlčne, OTHER, Hardware, , VAMOS division

VAMOS division was set 10 instead of 100.
CATS 1 & CATS2 scalers are sent to the two last channels of the scaler

Fixed, TEST, Wed Dec 4 19:19:38 2019, Marlčne, GRIT, Hardware, , Modifications of set-up

We have installed the new MUFEE board in the reaction chamber for MG2. This board is a new version with ATHED.

We have moved the MG9 board to become the board to read the future MUST2 detector at 90 deg. This board is now perpendicular to the other ones. We have

Pending, TEST, Tue Jan 21 17:55:12 2020, Marlčne, MUST2, Hardware, , Ovv error on the -5V of CAEN boards

BT_referenve_5V_cables_inv_a_comp_referenve_5V_partMUST2

BT_referenve_5V_partMUST2_cables_inv_a_comp_referenve_5V

The Ovv error shows on the -5V (first one) of the 3 board (5,3.3,10V for MUST2§squares)
It means that the voltage is over the asked value.
If we ask 5V, we get 5.5V in reality

Fixed, TEST, Wed Jan 22 15:53:25 2020, Marlčne, GRIT, Hardware, , Changes for MUGAST2020

Changes were made for MUGAST 2020 :
1- the board for MG10 before (2nd square) is now for MG6 new trap
2- the board for MG9 is put vertical and used for the MUST2 at 90 deg

Fixed, TEST, Sun Feb 23 20:50:06 2020, Marlčne, GRIT, General, , RUN 115 8x

Screenshots from MUGAST

The impact matrix looks fine but there are sectors missing but in the raw we see 13 sectors (instead of 16)

Fixed, TEST, Mon Feb 24 10:26:29 2020, Marlčne, GRIT, General, , infos

We have changed the range of the TAC FAG-HF to 500ns (it was 200 ns before)

there is no delay on the STOP of MUVI, it is directly the HF clean.

Fixed, e775s, Wed Feb 26 15:02:38 2020, Marlčne, RUN, General, , RUN 137